[ARM] S3C24XX: Update clock data on resume

Update the clock settings on resume for suspend/resume
support so that if the boot loader changes anything or
the system's PLL is reset then we return with the correct
settings.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

4 files changed, 44 insertions, 21 deletions

diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 334e696200be..a4a0a67a3074 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -47,6 +47,8 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
@@ -327,24 +329,24 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 
 /* initalise all the clocks */
 
-int __init s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk)
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+					   unsigned long hclk,
+					   unsigned long pclk)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
-
-	/* initialise the main system clocks */
-
-	clk_xtal.rate = xtal;
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+					clk_xtal.rate);
 
 	clk_mpll.rate = fclk;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
+}
 
-	/* assume uart clocks are correctly setup */
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+	clk_xtal.rate = xtal;
 
 	/* register our clocks */
 
@@ -368,3 +370,4 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 
 	return 0;
 }
+
diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c24xx/include/plat/clock.h
index 88a00c35b685..ba174aab76f2 100644
--- a/arch/arm/plat-s3c24xx/include/plat/clock.h
+++ b/arch/arm/plat-s3c24xx/include/plat/clock.h
@@ -60,7 +60,14 @@ extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
 extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+				 unsigned long hclk,
+				 unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 8efb57ad5019..bc37cf49f973 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -76,11 +76,13 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
 
+#ifndef CONFIG_CPU_FREQ
 	SAVE_ITEM(S3C2410_CLKDIVN),
 	SAVE_ITEM(S3C2410_MPLLCON),
+	SAVE_ITEM(S3C2410_REFRESH),
+#endif
 	SAVE_ITEM(S3C2410_UPLLCON),
 	SAVE_ITEM(S3C2410_CLKSLOW),
-	SAVE_ITEM(S3C2410_REFRESH),
 };
 
 static struct gpio_sleep {
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 7f33cef20bac..494368403055 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -29,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
@@ -71,15 +73,18 @@ void __init s3c244x_map_io(void)
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }
 
-void __init s3c244x_init_clocks(int xtal)
+void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long clkdiv;
 	unsigned long camdiv;
+	unsigned long xtal;
 	unsigned long hclk, fclk, pclk;
 	int hdiv = 1;
 
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
 
 	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
 
@@ -107,18 +112,24 @@ void __init s3c244x_init_clocks(int xtal)
 	}
 
 	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
+	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
 
 	/* print brief summary of clocks, etc */
 
 	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
 	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
 	/* initialise the clocks here, to allow other things like the
 	 * console to use them, and to add new ones after the initialisation
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_register_baseclocks(xtal);
+	s3c244x_setup_clocks();
 	s3c2410_baseclk_add();
 }