ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio

Once ready, ams-delta specific device drivers currently calling custom
ams_delta_latch[12]_write() functions can be updated to call generic
gpio_set_value() instead, which will make them less platform dependent.
Even more, some custom ams-delta only drivers can perhaps be dropped
from the tree after converting selected ams-delta platform devices to
follow generic GPIO based device models.

The latch_gpios[] table is initially filled with all latch1 and latch2
GPIO pins in order to register and initialize them from the board file
until those are handled by respective existing device drivers (leds,
nand, lcd, serio, asoc, serial). That table will get almost empty after
the transision process is completed, holding only pins not used by any
drivers / connected to unused devices, in order to initialize them from
the board file for power saving purposes.

The new ams_delta_latch_write() function is a unified replacement for
those removed ams_delta_latch[12]_write(), and serves as a temporary
wrapper over gpio_set_value(), providing the old API for those not yet
updated device drivers, and will be removed after all custom drivers are
converted or replaced.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 34 insertions, 9 deletions

diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102dc906b..68ffe328a777 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,13 +28,6 @@
 
 #if defined (CONFIG_MACH_AMS_DELTA)
 
-#define AMS_DELTA_LATCH1_PHYS		0x01000000
-#define AMS_DELTA_LATCH1_VIRT		0xEA000000
-#define AMS_DELTA_MODEM_PHYS		0x04000000
-#define AMS_DELTA_MODEM_VIRT		0xEB000000
-#define AMS_DELTA_LATCH2_PHYS		0x08000000
-#define AMS_DELTA_LATCH2_VIRT		0xEC000000
-
 #define AMS_DELTA_LATCH1_LED_CAMERA	0x01
 #define AMS_DELTA_LATCH1_LED_ADVERT	0x02
 #define AMS_DELTA_LATCH1_LED_EMAIL	0x04
@@ -66,9 +59,41 @@
 #define AMS_DELTA_GPIO_PIN_CONFIG	11
 #define AMS_DELTA_GPIO_PIN_NAND_RB	12
 
+#define AMS_DELTA_GPIO_PIN_LED_CAMERA		232
+#define AMS_DELTA_GPIO_PIN_LED_ADVERT		233
+#define AMS_DELTA_GPIO_PIN_LED_EMAIL		234
+#define AMS_DELTA_GPIO_PIN_LED_HANDSFREE	235
+#define AMS_DELTA_GPIO_PIN_LED_VOICEMAIL	236
+#define AMS_DELTA_GPIO_PIN_LED_VOICE		237
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
+
+#define AMS_DELTA_LATCH1_GPIO_BASE	AMS_DELTA_GPIO_PIN_LED_CAMERA
+#define AMS_DELTA_LATCH1_NGPIO		8
+#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO		16
+
 #ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch1_write(mask, value) \
+	ams_delta_latch_write(AMS_DELTA_LATCH1_GPIO_BASE, \
+			AMS_DELTA_LATCH1_NGPIO, (mask), (value))
+#define ams_delta_latch2_write(mask, value) \
+	ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+			AMS_DELTA_LATCH2_NGPIO, (mask), (value))
 #endif
 
 #endif /* CONFIG_MACH_AMS_DELTA */