[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omap

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 593 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
new file mode 100644
index 000000000000..ab38e4eb3130
--- /dev/null
+++ b/arch/arm/plat-omap/usb.c
@@ -0,0 +1,593 @@
+/*
+ * arch/arm/plat-omap/usb.c -- platform level USB initialization
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#undef	DEBUG
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/usb_otg.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+
+/* These routines should handle the standard chip-specific modes
+ * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ *
+ * Some board-*.c files will need to set up additional mux options,
+ * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
+ */
+
+/* TESTED ON:
+ *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
+ *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
+ *  - 1510 Innovator UDC with bundled usb0 cable
+ *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
+ *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
+ *  - 1710 custom development board using alternate pin group
+ *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ */
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_ARCH_OMAP_OTG
+
+static struct otg_transceiver *xceiv;
+
+/**
+ * otg_get_transceiver - find the (single) OTG transceiver driver
+ *
+ * Returns the transceiver driver, after getting a refcount to it; or
+ * null if there is no such transceiver.  The caller is responsible for
+ * releasing that count.
+ */
+struct otg_transceiver *otg_get_transceiver(void)
+{
+	if (xceiv)
+		get_device(xceiv->dev);
+	return xceiv;
+}
+EXPORT_SYMBOL(otg_get_transceiver);
+
+int otg_set_transceiver(struct otg_transceiver *x)
+{
+	if (xceiv && x)
+		return -EBUSY;
+	xceiv = x;
+	return 0;
+}
+EXPORT_SYMBOL(otg_set_transceiver);
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	if (nwires == 0) {
+		if (!cpu_is_omap15xx()) {
+			/* pulldown D+/D- */
+			USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1);
+		}
+		return 0;
+	}
+
+	if (is_device)
+		omap_cfg_reg(W4_USB_PUEN);
+
+	/* internal transceiver */
+	if (nwires == 2) {
+		// omap_cfg_reg(P9_USB_DP);
+		// omap_cfg_reg(R8_USB_DM);
+
+		if (cpu_is_omap15xx()) {
+			/* This works on 1510-Innovator */
+			return 0;
+		}
+
+		/* NOTES:
+		 *  - peripheral should configure VBUS detection!
+		 *  - only peripherals may use the internal D+/D- pulldowns
+		 *  - OTG support on this port not yet written
+		 */
+
+		USB_TRANSCEIVER_CTRL_REG &= ~(7 << 4);
+		if (!is_device)
+			USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+
+		return 3 << 16;
+	}
+
+	/* alternate pin config, external transceiver */
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
+		return 0;
+	}
+
+	omap_cfg_reg(V6_USB0_TXD);
+	omap_cfg_reg(W9_USB0_TXEN);
+	omap_cfg_reg(W5_USB0_SE0);
+
+	/* NOTE:  SPEED and SUSP aren't configured here */
+
+	if (nwires != 3)
+		omap_cfg_reg(Y5_USB0_RCV);
+	if (nwires != 6)
+		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_cfg_reg(AA9_USB0_VP);
+		omap_cfg_reg(R9_USB0_VM);
+		USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+	return syscon1 << 16;
+}
+
+static u32 __init omap_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	if (nwires != 6 && !cpu_is_omap15xx())
+		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
+	if (nwires == 0)
+		return 0;
+
+	/* external transceiver */
+	omap_cfg_reg(USB1_TXD);
+	omap_cfg_reg(USB1_TXEN);
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB1_SEO);
+		omap_cfg_reg(USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
+		omap_cfg_reg(W13_1610_USB1_SE0);
+		omap_cfg_reg(R13_1610_USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1710()) {
+		omap_cfg_reg(R13_1710_USB1_SE0);
+		// SUSP
+	} else {
+		pr_debug("usb unrecognized\n");
+	}
+	if (nwires != 3)
+		omap_cfg_reg(USB1_RCV);
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_cfg_reg(USB1_VP);
+		omap_cfg_reg(USB1_VM);
+		if (!cpu_is_omap15xx())
+			USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+	return syscon1 << 20;
+}
+
+static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	/* NOTE erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+	if (nwires != 6 && !cpu_is_omap15xx())
+		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+
+	/* external transceiver */
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB2_TXD);
+		omap_cfg_reg(USB2_TXEN);
+		omap_cfg_reg(USB2_SEO);
+		if (nwires != 3)
+			omap_cfg_reg(USB2_RCV);
+		/* there is no USB2_SPEED */
+	} else if (cpu_is_omap16xx()) {
+		omap_cfg_reg(V6_USB2_TXD);
+		omap_cfg_reg(W9_USB2_TXEN);
+		omap_cfg_reg(W5_USB2_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(Y5_USB2_RCV);
+		// FIXME omap_cfg_reg(USB2_SPEED);
+	} else {
+		pr_debug("usb unrecognized\n");
+	}
+	// omap_cfg_reg(USB2_SUSP);
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		if (cpu_is_omap15xx()) {
+			omap_cfg_reg(USB2_VP);
+			omap_cfg_reg(USB2_VM);
+		} else {
+			omap_cfg_reg(AA9_USB2_VP);
+			omap_cfg_reg(R9_USB2_VM);
+			USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+		}
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+	return syscon1 << 24;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(CONFIG_USB_GADGET_OMAP) || \
+	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
+	(defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
+static void usb_release(struct device *dev)
+{
+	/* normally not freed */
+}
+#endif
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= IH2_BASE + 20,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= IH2_BASE + 30,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= IH2_BASE + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.release		= usb_release,
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 4096,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HHC_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.release		= usb_release,
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IH2_BASE + 8,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.dev = {
+		.release		= usb_release,
+	},
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define ULPD_CLOCK_CTRL_REG	__REG16(ULPD_CLOCK_CTRL)
+#define ULPD_SOFT_REQ_REG	__REG16(ULPD_SOFT_REQ)
+
+
+// FIXME correct answer depends on hmc_mode,
+// as does any nonzero value for config->otg port number
+#ifdef	CONFIG_USB_GADGET_OMAP
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_ARCH_OMAP_OTG
+
+void __init
+omap_otg_init(struct omap_usb_config *config)
+{
+	u32		syscon = OTG_SYSCON_1_REG & 0xffff;
+	int		status;
+	int		alt_pingroup = 0;
+
+	/* NOTE:  no bus or clock setup (yet?) */
+
+	syscon = OTG_SYSCON_1_REG & 0xffff;
+	if (!(syscon & OTG_RESET_DONE))
+		pr_debug("USB resets not complete?\n");
+
+	// OTG_IRQ_EN_REG = 0;
+
+	/* pin muxing and transceiver pinouts */
+	if (config->pins[0] > 2)	/* alt pingroup 2 */
+		alt_pingroup = 1;
+	syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
+	syscon |= omap_usb1_init(config->pins[1]);
+	syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
+	pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
+	OTG_SYSCON_1_REG = syscon;
+
+	syscon = config->hmc_mode;
+	syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+#ifdef	CONFIG_USB_OTG
+	if (config->otg)
+		syscon |= OTG_EN;
+#endif
+	pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
+	pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
+	OTG_SYSCON_2_REG = syscon;
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (alt_pingroup)
+		printk(", usb2 alt %d wires", config->pins[2]);
+	else if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (!alt_pingroup && config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	if (config->otg)
+		printk(", Mini-AB on usb%d", config->otg - 1);
+	printk("\n");
+
+	/* leave USB clocks/controllers off until needed */
+	ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
+	ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
+	ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
+	syscon = OTG_SYSCON_1_REG;
+	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	if (config->otg || config->register_dev) {
+		syscon &= ~DEV_IDLE_EN;
+		udc_device.dev.platform_data = config;
+		/* FIXME patch IRQ numbers for omap730 */
+		status = platform_device_register(&udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->otg || config->register_host) {
+		syscon &= ~HST_IDLE_EN;
+		ohci_device.dev.platform_data = config;
+		if (cpu_is_omap730())
+			ohci_resources[1].start = INT_730_USB_HHC_1;
+		status = platform_device_register(&ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+	}
+#endif
+
+#ifdef	CONFIG_USB_OTG
+	if (config->otg) {
+		syscon &= ~OTG_IDLE_EN;
+		otg_device.dev.platform_data = config;
+		if (cpu_is_omap730())
+			otg_resources[1].start = INT_730_USB_OTG;
+		status = platform_device_register(&otg_device);
+		if (status)
+			pr_debug("can't register OTG device, %d\n", status);
+	}
+#endif
+	pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
+	OTG_SYSCON_1_REG = syscon;
+
+	status = 0;
+}
+
+#else
+static inline void omap_otg_init(struct omap_usb_config *config) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_ARCH_OMAP1510
+
+#define ULPD_DPLL_CTRL_REG	__REG16(ULPD_DPLL_CTRL)
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+#define ULPD_APLL_CTRL_REG	__REG16(ULPD_APLL_CTRL)
+#define APLL_NDPLL_SWITCH	(1 << 0)
+
+
+static void __init omap_1510_usb_init(struct omap_usb_config *config)
+{
+	int status;
+	unsigned int val;
+
+	omap_usb0_init(config->pins[0], is_usb0_device(config));
+	omap_usb1_init(config->pins[1]);
+	omap_usb2_init(config->pins[2], 0);
+
+	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
+	val |= (config->hmc_mode << 1);
+	omap_writel(val, MOD_CONF_CTRL_0);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	printk("\n");
+
+	/* use DPLL for 48 MHz function clock */
+	pr_debug("APLL %04x DPLL %04x REQ %04x\n", ULPD_APLL_CTRL_REG,
+			ULPD_DPLL_CTRL_REG, ULPD_SOFT_REQ_REG);
+	ULPD_APLL_CTRL_REG &= ~APLL_NDPLL_SWITCH;
+	ULPD_DPLL_CTRL_REG |= DPLL_IOB | DPLL_PLL_ENABLE;
+	ULPD_SOFT_REQ_REG |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+	while (!(ULPD_DPLL_CTRL_REG & DPLL_LOCK))
+		cpu_relax();
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	if (config->register_dev) {
+		udc_device.dev.platform_data = config;
+		status = platform_device_register(&udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+		/* udc driver gates 48MHz by D+ pullup */
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->register_host) {
+		ohci_device.dev.platform_data = config;
+		status = platform_device_register(&ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+		/* hcd explicitly gates 48MHz */
+	}
+#endif
+}
+
+#else
+static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct omap_usb_config platform_data;
+
+static int __init
+omap_usb_init(void)
+{
+	const struct omap_usb_config *config;
+
+	config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
+	if (config == NULL) {
+		printk(KERN_ERR "USB: No board-specific "
+				"platform config found\n");
+		return -ENODEV;
+	}
+	platform_data = *config;
+
+	if (cpu_is_omap730() || cpu_is_omap16xx())
+		omap_otg_init(&platform_data);
+	else if (cpu_is_omap15xx())
+		omap_1510_usb_init(&platform_data);
+	else {
+		printk(KERN_ERR "USB: No init for your chip yet\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(omap_usb_init);