Merge branch 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits)
  OMAP: Add debugfs node to show the summary of all clocks
  OMAP2+: hwmod: Follow the recommended PRCM module enable sequence
  OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code
  OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming
  OMAP2+: PM: idle clkdms only if already in idle
  OMAP2+: clockdomain: add clkdm_in_hwsup()
  OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework
  OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()
  OMAP4: hwmod: Introduce the module control in hwmod control
  OMAP4: cm: Add two new APIs for modulemode control
  OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure
  OMAP4: hwmod data: Add PRM context register offset
  OMAP4: prm: Remove deprecated functions
  OMAP4: prm: Replace warm reset API with the offset based version
  OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros
  OMAP: hwmod: Wait the idle status to be disabled
  OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros
  OMAP2+: hwmod: Init clkdm field at boot time
  OMAP4: hwmod data: Add clock domain attribute
  OMAP4: clock data: Add missing divider selection for auxclks
  ...

2 files changed, 22 insertions, 4 deletions

diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c88432005665..926d25c780f3 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -407,11 +407,19 @@
 #endif
 #define TWL6030_IRQ_END		(TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
 
+#define TWL6040_CODEC_IRQ_BASE	TWL6030_IRQ_END
+#ifdef CONFIG_TWL6040_CODEC
+#define TWL6040_CODEC_NR_IRQS	6
+#else
+#define TWL6040_CODEC_NR_IRQS	0
+#endif
+#define TWL6040_CODEC_IRQ_END	(TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
+
 /* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END)
+#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
 #define TWL_IRQ_END 		TWL4030_GPIO_IRQ_END
 #else
-#define TWL_IRQ_END		TWL6030_IRQ_END
+#define TWL_IRQ_END		TWL6040_CODEC_IRQ_END
 #endif
 
 /* GPMC related */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index fafdfe3c8d4e..0e329ca88a70 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -2,6 +2,7 @@
  * omap_hwmod macros, structures
  *
  * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -79,6 +80,11 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 #define HWMOD_IDLEMODE_SMART		(1 << 2)
 #define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
 
+/* modulemode control type (SW or HW) */
+#define MODULEMODE_HWCTRL		1
+#define MODULEMODE_SWCTRL		2
+
+
 /**
  * struct omap_hwmod_mux_info - hwmod specific mux configuration
  * @pads:              array of omap_device_pad entries
@@ -360,9 +366,11 @@ struct omap_hwmod_omap2_prcm {
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
-	void __iomem	*clkctrl_reg;
-	void __iomem	*rstctrl_reg;
+	u16		clkctrl_offs;
+	u16		rstctrl_offs;
+	u16		context_offs;
 	u8		submodule_wkdep_bit;
+	u8		modulemode;
 };
 
 
@@ -515,6 +523,8 @@ struct omap_hwmod {
 	const char			*main_clk;
 	struct clk			*_clk;
 	struct omap_hwmod_opt_clk	*opt_clks;
+	char				*clkdm_name;
+	struct clockdomain		*clkdm;
 	char				*vdd_name;
 	struct voltagedomain		*voltdm;
 	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */