Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

34 files changed, 398 insertions, 581 deletions

diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 3cf4fa25ab3d..97126dfd2888 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -151,14 +151,14 @@ struct omap_board_config_kernel {
 	const void *data;
 };
 
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
 
 #define omap_get_config(tag, type) \
 	((const type *) __omap_get_config((tag), sizeof(type), 0))
 #define omap_get_nr_config(tag, type, nr) \
 	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
 
-extern const void *omap_get_var_config(u16 tag, size_t *len);
+extern const void *__init omap_get_var_config(u16 tag, size_t *len);
 
 extern struct omap_board_config_kernel *omap_board_config;
 extern int omap_board_config_size;
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 256ab3f1ec8f..f1899a3e4174 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -38,6 +38,7 @@ struct omap_clk {
 #define CK_3517		(1 << 9)
 #define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
 #define CK_443X		(1 << 11)
+#define CK_TI816X	(1 << 12)
 
 
 #define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 8eb0adab19ea..006e599c6613 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -25,6 +25,8 @@ struct clockdomain;
  * @disable: fn ptr that enables the current clock in hardware
  * @find_idlest: function returning the IDLEST register for the clock's IP blk
  * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
  *
  * A "companion" clk is an accompanying clock to the one being queried
  * that must be enabled for the IP module connected to the clock to
@@ -42,6 +44,8 @@ struct clkops {
 					       u8 *, u8 *);
 	void			(*find_companion)(struct clk *, void __iomem **,
 						  u8 *);
+	void			(*allow_idle)(struct clk *);
+	void			(*deny_idle)(struct clk *);
 };
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -53,6 +57,7 @@ struct clkops {
 #define RATE_IN_3430ES2PLUS	(1 << 3)	/* 3430 ES >= 2 rates only */
 #define RATE_IN_36XX		(1 << 4)
 #define RATE_IN_4430		(1 << 5)
+#define RATE_IN_TI816X		(1 << 6)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 #define RATE_IN_34XX		(RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
@@ -104,7 +109,6 @@ struct clksel {
  * @clk_ref: struct clk pointer to the clock's reference clock input
  * @control_reg: register containing the DPLL mode bitfield
  * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @rate_tolerance: maximum variance allowed from target rate (in Hz)
  * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
  * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
  * @max_multiplier: maximum valid non-bypass multiplier value (actual)
@@ -130,12 +134,9 @@ struct clksel {
  * XXX Some DPLLs have multiple bypass inputs, so it's not technically
  * correct to only have one @clk_bypass pointer.
  *
- * XXX @rate_tolerance should probably be deprecated - currently there
- * don't seem to be any usecases for DPLL rounding that is not exact.
- *
  * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
  * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a differenct structure, so that the runtime-fixed data
+ * and placed into a different structure, so that the runtime-fixed data
  * can be placed into read-only space.
  */
 struct dpll_data {
@@ -146,7 +147,6 @@ struct dpll_data {
 	struct clk		*clk_ref;
 	void __iomem		*control_reg;
 	u32			enable_mask;
-	unsigned int		rate_tolerance;
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
 	u16			max_multiplier;
@@ -171,12 +171,24 @@ struct dpll_data {
 
 #endif
 
-/* struct clk.flags possibilities */
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
 #define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
 #define CLOCK_IDLE_CONTROL	(1 << 1)
 #define CLOCK_NO_IDLE_PARENT	(1 << 2)
 #define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
 #define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
 
 /**
  * struct clk - OMAP struct clk
@@ -292,6 +304,8 @@ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
 extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #endif
 extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
 
 extern const struct clkops clkops_null;
 
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 29b2afb4288f..5288130be96e 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -56,16 +56,13 @@ struct omap_globals {
 	unsigned long   prm;            /* Power and Reset Management */
 	unsigned long   cm;             /* Clock Management */
 	unsigned long   cm2;
-	unsigned long	uart1_phys;
-	unsigned long	uart2_phys;
-	unsigned long	uart3_phys;
-	unsigned long	uart4_phys;
 };
 
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 3fd8b4055727..8198bb6cdb5e 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
- * Copyright (C) 2009 Texas Instruments.
+ * Copyright (C) 2009-11 Texas Instruments.
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -105,6 +105,12 @@ static inline int is_omap ##subclass (void)		\
 	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
 }
 
+#define IS_TI_SUBCLASS(subclass, id)			\
+static inline int is_ti ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
@@ -118,6 +124,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 
+IS_TI_SUBCLASS(816x, 0x816)
+
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
 #define cpu_is_omap16xx()		0
@@ -126,6 +134,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_ti816x()			0
 #define cpu_is_omap44xx()		0
 #define cpu_is_omap443x()		0
 
@@ -170,11 +179,11 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		is_omap24xx()
 # endif
-# if defined (CONFIG_ARCH_OMAP2420)
+# if defined (CONFIG_SOC_OMAP2420)
 #  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		is_omap242x()
 # endif
-# if defined (CONFIG_ARCH_OMAP2430)
+# if defined (CONFIG_SOC_OMAP2430)
 #  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		is_omap243x()
 # endif
@@ -189,11 +198,11 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP2420)
+# if defined(CONFIG_SOC_OMAP2420)
 #  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP2430)
+# if defined(CONFIG_SOC_OMAP2430)
 #  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		1
 # endif
@@ -201,7 +210,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap34xx
 #  define cpu_is_omap34xx()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP3430)
+# if defined(CONFIG_SOC_OMAP3430)
 #  undef  cpu_is_omap343x
 #  define cpu_is_omap343x()		1
 # endif
@@ -330,6 +339,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # undef cpu_is_omap3530
 # undef cpu_is_omap3505
 # undef cpu_is_omap3517
+# undef cpu_is_ti816x
 # define cpu_is_omap3430()		is_omap3430()
 # define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
 						(!omap3_has_iva()) &&	\
@@ -345,6 +355,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap3517()		is_omap3517()
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
+# define cpu_is_ti816x()		is_ti816x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
@@ -389,9 +400,15 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
 #define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
 
+#define TI816X_CLASS		0x81600034
+#define TI8168_REV_ES1_0	TI816X_CLASS
+#define TI8168_REV_ES1_1	(TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+
 #define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	OMAP443X_CLASS
-#define OMAP4430_REV_ES2_0	0x44301044
+#define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
 
 /*
  * omap_chip bits
@@ -419,11 +436,16 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP3630ES1_1           (1 << 9)
 #define CHIP_IS_OMAP3630ES1_2           (1 << 10)
 #define CHIP_IS_OMAP4430ES2		(1 << 11)
+#define CHIP_IS_OMAP4430ES2_1		(1 << 12)
+#define CHIP_IS_OMAP4430ES2_2		(1 << 13)
+#define CHIP_IS_TI816X			(1 << 14)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
-#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1 | \
-						 CHIP_IS_OMAP4430ES2)
+#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1 |		\
+					 CHIP_IS_OMAP4430ES2 |		\
+					 CHIP_IS_OMAP4430ES2_1 |	\
+					 CHIP_IS_OMAP4430ES2_2)
 
 /*
  * "GE" here represents "greater than or equal to" in terms of ES
@@ -455,6 +477,7 @@ extern u32 omap3_features;
 #define OMAP3_HAS_ISP			BIT(4)
 #define OMAP3_HAS_192MHZ_CLK		BIT(5)
 #define OMAP3_HAS_IO_WAKEUP		BIT(6)
+#define OMAP3_HAS_SDRC			BIT(7)
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
 static inline unsigned int omap3_has_ ##feat(void)	\
@@ -469,5 +492,6 @@ OMAP3_HAS_FEATURE(neon, NEON)
 OMAP3_HAS_FEATURE(isp, ISP)
 OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
 OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index 537f4e449f50..0f140ecedb01 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -23,6 +23,7 @@
 #include <linux/list.h>
 #include <linux/kobject.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 #include <asm/atomic.h>
 
 #define DISPC_IRQ_FRAMEDONE		(1 << 0)
@@ -226,6 +227,16 @@ struct omap_dss_board_info {
 	struct omap_dss_device *default_device;
 };
 
+#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
+/* Init with the board info */
+extern int omap_display_init(struct omap_dss_board_info *board_data);
+#else
+static inline int omap_display_init(struct omap_dss_board_info *board_data)
+{
+	return 0;
+}
+#endif
+
 struct omap_video_timings {
 	/* Unit: pixels */
 	u16 x_res;
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index dfa3aff9761b..d6c70d2f4030 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -3,6 +3,12 @@
  *
  * OMAP Dual-Mode Timers
  *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Platform device conversion and hwmod support.
+ *
  * Copyright (C) 2005 Nokia Corporation
  * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
  * PWM and clock framwork support by Timo Teras.
@@ -44,6 +50,11 @@
 #define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
 
+/*
+ * IP revision identifier so that Highlander IP
+ * in OMAP4 can be distinguished.
+ */
+#define OMAP_TIMER_IP_VERSION_1                        0x1
 struct omap_dm_timer;
 extern struct omap_dm_timer *gptimer_wakeup;
 extern struct sys_timer omap_timer;
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index ae39bcb3f5ba..bd3c6324ae1f 100644
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
@@ -30,18 +30,18 @@ extern void omap1510_fpga_init_irq(void);
  * ---------------------------------------------------------------------------
  */
 /* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		IOMEM(0xE8000000)	/* VA */
+#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
 #define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
 #define H2P2_DBG_FPGA_START		0x04000000		/* PA */
 
 #define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
 
 /* NOTE:  most boards don't have a static mapping for the FPGA ... */
 struct h2p2_dbg_fpga {
@@ -81,55 +81,55 @@ struct h2p2_dbg_fpga {
  *  OMAP-1510 FPGA
  * ---------------------------------------------------------------------------
  */
-#define OMAP1510_FPGA_BASE		IOMEM(0xE8000000)	/* VA */
+#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
 #define OMAP1510_FPGA_SIZE		SZ_4K
 #define OMAP1510_FPGA_START		0x08000000		/* PA */
 
 /* Revision */
-#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
 
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
 
 /* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
+#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
 
 /* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
+#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
 
 /* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
+#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
 
 #define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
 
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 85ded598853e..12b316165037 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -41,6 +41,8 @@
 #define GPMC_NAND_ADDRESS	0x0000000b
 #define GPMC_NAND_DATA		0x0000000c
 
+#define GPMC_ENABLE_IRQ		0x0000000d
+
 /* ECC commands */
 #define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
 #define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
@@ -78,6 +80,19 @@
 #define WR_RD_PIN_MONITORING		0x00600000
 #define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
 #define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE	0x01
+#define GPMC_IRQ_COUNT_EVENT		0x02
+
+#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+
+enum omap_ecc {
+		/* 1-bit ecc: stored at end of spare area */
+	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+		/* 1-bit ecc: stored at begining of spare area as romcode */
+	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+};
 
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
@@ -130,12 +145,11 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern void gpmc_init(void);
 extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
 extern int gpmc_nand_read(int cs, int cmd);
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index d5b26adfb890..e87efe1499b8 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -286,5 +286,6 @@
 #include <plat/omap24xx.h>
 #include <plat/omap34xx.h>
 #include <plat/omap44xx.h>
+#include <plat/ti816x.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index ef4106c13183..d72ec85c97e6 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -259,7 +259,7 @@ struct omap_sdrc_params;
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else
 static inline void omap242x_map_common_io(void)
@@ -267,7 +267,7 @@ static inline void omap242x_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 extern void omap243x_map_common_io(void);
 #else
 static inline void omap243x_map_common_io(void)
@@ -283,6 +283,14 @@ static inline void omap34xx_map_common_io(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 extern void omap44xx_map_common_io(void);
 #else
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 69230d685538..174f1b9c8c03 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -31,6 +31,7 @@ struct iommu {
 	struct clk	*clk;
 	void __iomem	*regbase;
 	struct device	*dev;
+	void		*isr_priv;
 
 	unsigned int	refcount;
 	struct mutex	iommu_lock;	/* global for this whole object */
@@ -47,7 +48,7 @@ struct iommu {
 	struct list_head	mmap;
 	struct mutex		mmap_lock; /* protect mmap */
 
-	int (*isr)(struct iommu *obj);
+	int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, void *priv);
 
 	void *ctx; /* iommu context: registres saved area */
 	u32 da_start;
@@ -109,6 +110,13 @@ struct iommu_platform_data {
 	u32 da_end;
 };
 
+/* IOMMU errors */
+#define OMAP_IOMMU_ERR_TLB_MISS		(1 << 0)
+#define OMAP_IOMMU_ERR_TRANS_FAULT	(1 << 1)
+#define OMAP_IOMMU_ERR_EMU_MISS		(1 << 2)
+#define OMAP_IOMMU_ERR_TBLWALK_FAULT	(1 << 3)
+#define OMAP_IOMMU_ERR_MULTIHIT_FAULT	(1 << 4)
+
 #if defined(CONFIG_ARCH_OMAP1)
 #error "iommu for this processor not implemented yet"
 #else
@@ -154,11 +162,17 @@ extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
 extern void flush_iotlb_all(struct iommu *obj);
 
 extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd,
+				   u32 **ppte);
 extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
 
 extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);
 extern struct iommu *iommu_get(const char *name);
 extern void iommu_put(struct iommu *obj);
+extern int iommu_set_isr(const char *name,
+			 int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs,
+				    void *priv),
+			 void *isr_priv);
 
 extern void iommu_save_ctx(struct iommu *obj);
 extern void iommu_restore_ctx(struct iommu *obj);
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index bdc7ce5d7a4a..32a2f6c4d39e 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -71,8 +71,6 @@ struct iovm_struct {
 #define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
 
 #define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
-#define IOVMF_DA_ANON		(2 << (4 + IOVMF_SW_SHIFT))
-#define IOVMF_DA_MASK		(3 << (4 + IOVMF_SW_SHIFT))
 
 
 extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2910de921c52..d77928370463 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -315,9 +315,12 @@
 #define INT_34XX_SSM_ABORT_IRQ	6
 #define INT_34XX_SYS_NIRQ	7
 #define INT_34XX_D2D_FW_IRQ	8
+#define INT_34XX_L3_DBG_IRQ     9
+#define INT_34XX_L3_APP_IRQ     10
 #define INT_34XX_PRCM_MPU_IRQ	11
 #define INT_34XX_MCBSP1_IRQ	16
 #define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_GPMC_IRQ	20
 #define INT_34XX_MCBSP3_IRQ	22
 #define INT_34XX_MCBSP4_IRQ	23
 #define INT_34XX_CAM_IRQ	24
@@ -411,7 +414,13 @@
 #define TWL_IRQ_END		TWL6030_IRQ_END
 #endif
 
-#define NR_IRQS			TWL_IRQ_END
+/* GPMC related */
+#define OMAP_GPMC_IRQ_BASE	(TWL_IRQ_END)
+#define OMAP_GPMC_NR_IRQS	7
+#define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+
+
+#define NR_IRQS			OMAP_GPMC_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h
new file mode 100644
index 000000000000..b8b5641379b0
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_2xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+
+/* L3 CONNIDs */
+/* Display Sub system (DSS) */
+#define OMAP2_L3_CORE_FW_CONNID_DSS			8
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h
new file mode 100644
index 000000000000..cde1938c5f82
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_3xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+
+/* L3 Initiator IDs */
+/* Display Sub system (DSS) */
+#define OMAP3_L3_CORE_FW_INIT_ID_DSS			29
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h
new file mode 100644
index 000000000000..3f39cf8a35c6
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_2xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+
+/* L4 CORE */
+/* Display Sub system (DSS) */
+#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION			28
+#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION			29
+#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION			30
+#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION			31
+#define OMAP2420_L4_CORE_FW_DSS_TA_REGION			32
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
index 5e1949375422..881a858b1ffc 100644
--- a/arch/arm/plat-omap/include/plat/l4_3xxx.h
+++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -21,4 +21,14 @@
 #define OMAP3_L4_CORE_FW_I2C3_REGION				73
 #define OMAP3_L4_CORE_FW_I2C3_TA_REGION				74
 
+/* Display Sub system (DSS) */
+#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP				2
+
+#define OMAP3_L4_CORE_FW_DSS_DSI_REGION				104
+#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION			3
+#define OMAP3_L4_CORE_FW_DSS_CORE_REGION			4
+#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION			4
+#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION			5
+#define OMAP3_L4_CORE_FW_DSS_VENC_REGION			6
+#define OMAP3_L4_CORE_FW_DSS_TA_REGION				7
 #endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index b87d83ccd545..f8f690ab2997 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -37,6 +37,10 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 	.id	= OMAP_MCBSP##port_nr,			\
 }
 
+#define MCBSP_CONFIG_TYPE2	0x2
+#define MCBSP_CONFIG_TYPE3	0x3
+#define MCBSP_CONFIG_TYPE4	0x4
+
 #define OMAP7XX_MCBSP1_BASE	0xfffb1000
 #define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
@@ -48,32 +52,14 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-#define OMAP24XX_MCBSP1_BASE	0x48074000
-#define OMAP24XX_MCBSP2_BASE	0x48076000
-#define OMAP2430_MCBSP3_BASE	0x4808c000
-#define OMAP2430_MCBSP4_BASE	0x4808e000
-#define OMAP2430_MCBSP5_BASE	0x48096000
-
-#define OMAP34XX_MCBSP1_BASE	0x48074000
-#define OMAP34XX_MCBSP2_BASE	0x49022000
-#define OMAP34XX_MCBSP2_ST_BASE	0x49028000
-#define OMAP34XX_MCBSP3_BASE	0x49024000
-#define OMAP34XX_MCBSP3_ST_BASE	0x4902A000
-#define OMAP34XX_MCBSP3_BASE	0x49024000
-#define OMAP34XX_MCBSP4_BASE	0x49026000
-#define OMAP34XX_MCBSP5_BASE	0x48096000
-
-#define OMAP44XX_MCBSP1_BASE	0x49022000
-#define OMAP44XX_MCBSP2_BASE	0x49024000
-#define OMAP44XX_MCBSP3_BASE	0x49026000
-#define OMAP44XX_MCBSP4_BASE	0x48096000
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+#ifdef CONFIG_ARCH_OMAP1
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x02
 #define OMAP_MCBSP_REG_DXR2	0x04
 #define OMAP_MCBSP_REG_DXR1	0x06
+#define OMAP_MCBSP_REG_DRR	0x02
+#define OMAP_MCBSP_REG_DXR	0x06
 #define OMAP_MCBSP_REG_SPCR2	0x08
 #define OMAP_MCBSP_REG_SPCR1	0x0a
 #define OMAP_MCBSP_REG_RCR2	0x0c
@@ -106,13 +92,6 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 #define OMAP_MCBSP_REG_XCCR	0x00
 #define OMAP_MCBSP_REG_RCCR	0x00
 
-#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP1
-#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
-
 #else
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -168,13 +147,6 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 #define OMAP_ST_REG_SFIRCR	0x28
 #define OMAP_ST_REG_SSELCR	0x2C
 
-#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP2
-#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
-
 #endif
 
 /************************** McBSP SPCR1 bit definitions ***********************/
@@ -428,8 +400,9 @@ struct omap_mcbsp_platform_data {
 #ifdef CONFIG_ARCH_OMAP3
 	/* Sidetone block for McBSP 2 and 3 */
 	unsigned long phys_base_st;
-	u16 buffer_size;
 #endif
+	u16 buffer_size;
+	unsigned int mcbsp_config_type;
 };
 
 struct omap_mcbsp_st_data {
@@ -445,6 +418,7 @@ struct omap_mcbsp_st_data {
 struct omap_mcbsp {
 	struct device *dev;
 	unsigned long phys_base;
+	unsigned long phys_dma_base;
 	void __iomem *io_base;
 	u8 id;
 	u8 free;
@@ -471,7 +445,6 @@ struct omap_mcbsp {
 	/* Protect the field .free, while checking if the mcbsp is in use */
 	spinlock_t lock;
 	struct omap_mcbsp_platform_data *pdata;
-	struct clk *iclk;
 	struct clk *fclk;
 #ifdef CONFIG_ARCH_OMAP3
 	struct omap_mcbsp_st_data *st_data;
@@ -480,7 +453,17 @@ struct omap_mcbsp {
 	u16 max_rx_thres;
 #endif
 	void *reg_cache;
+	unsigned int mcbsp_config_type;
 };
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+	const char *sidetone;
+};
+
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 
@@ -488,8 +471,8 @@ extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 #define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
 
 int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
-					int size);
+void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+			struct omap_mcbsp_platform_data *config, int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
 #ifdef CONFIG_ARCH_OMAP3
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
@@ -539,6 +522,9 @@ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 void omap2_mcbsp1_mux_clkr_src(u8 mux);
 void omap2_mcbsp1_mux_fsr_src(u8 mux);
 
+int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
+int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
+
 #ifdef CONFIG_ARCH_OMAP3
 /* Sidetone specific API */
 int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 1254e4945b6f..3d51b18131cc 100644
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -1,8 +1,19 @@
 #ifndef _OMAP2_MCSPI_H
 #define _OMAP2_MCSPI_H
 
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
 struct omap2_mcspi_platform_config {
 	unsigned short	num_cs;
+	unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+	unsigned short num_chipselect;
 };
 
 struct omap2_mcspi_device_config {
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index f57f36abb07e..f38fef9f1310 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -24,25 +24,19 @@
 #define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
 
 #define OMAP24XX_NR_MMC		2
-#define OMAP34XX_NR_MMC		3
-#define OMAP44XX_NR_MMC		5
 #define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
-#define OMAP3_HSMMC_SIZE	0x200
-#define OMAP4_HSMMC_SIZE	0x1000
 #define OMAP2_MMC1_BASE		0x4809c000
-#define OMAP2_MMC2_BASE		0x480b4000
-#define OMAP3_MMC3_BASE		0x480ad000
-#define OMAP4_MMC4_BASE		0x480d1000
-#define OMAP4_MMC5_BASE		0x480d5000
+
 #define OMAP4_MMC_REG_OFFSET	0x100
-#define HSMMC5			(1 << 4)
-#define HSMMC4			(1 << 3)
-#define HSMMC3			(1 << 2)
-#define HSMMC2			(1 << 1)
-#define HSMMC1			(1 << 0)
 
 #define OMAP_MMC_MAX_SLOTS	2
 
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT	BIT(1)
+
+struct omap_mmc_dev_attr {
+	u8 flags;
+};
+
 struct omap_mmc_platform_data {
 	/* back-link to device */
 	struct device *dev;
@@ -71,6 +65,9 @@ struct omap_mmc_platform_data {
 
 	u64 dma_mask;
 
+	/* Integrating attributes from the omap_hwmod layer */
+	u8 controller_flags;
+
 	/* Register offset deviation */
 	u16 reg_offset;
 
@@ -159,8 +156,7 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
-void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers);
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
 int omap_mmc_add(const char *name, int id, unsigned long base,
 				unsigned long size, unsigned int irq,
 				struct omap_mmc_platform_data *data);
@@ -169,8 +165,7 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
 {
 }
-static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers)
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
 }
 static inline int omap_mmc_add(const char *name, int id, unsigned long base,
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index ffd909fa5287..999ffba2690c 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -66,7 +66,7 @@
 #  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2
@@ -74,7 +74,7 @@
 #  define OMAP_NAME omap2420
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 6562cd082bb1..d86d1ecf0068 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -8,8 +8,16 @@
  * published by the Free Software Foundation.
  */
 
+#include <plat/gpmc.h>
 #include <linux/mtd/partitions.h>
 
+enum nand_io {
+	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
+	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
+	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
+	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
+};
+
 struct omap_nand_platform_data {
 	unsigned int		options;
 	int			cs;
@@ -20,8 +28,11 @@ struct omap_nand_platform_data {
 	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	int			gpmc_irq;
+	enum nand_io		xfer_type;
 	unsigned long		phys_base;
 	int			devsize;
+	enum omap_ecc           ecc_opt;
 };
 
 /* minimum size for IO mapping */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1eee85a8abb3..1adea9c62984 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod macros, structures
  *
- * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2009-2011 Nokia Corporation
  * Paul Walmsley
  *
  * Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -30,11 +30,11 @@
 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
 
 #include <linux/kernel.h>
+#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
 #include <plat/cpu.h>
-#include <plat/voltage.h>
 
 struct omap_device;
 
@@ -90,6 +90,9 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 struct omap_hwmod_mux_info {
 	int				nr_pads;
 	struct omap_device_pad		*pads;
+	int				nr_pads_dynamic;
+	struct omap_device_pad		**pads_dynamic;
+	bool				enabled;
 };
 
 /**
@@ -124,6 +127,7 @@ struct omap_hwmod_dma_info {
  * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
  * @name: name of the reset line (module local name)
  * @rst_shift: Offset of the reset bit
+ * @st_shift: Offset of the reset status bit (OMAP2/3 only)
  *
  * @name should be something short, e.g., "cpu0" or "rst". It is defined
  * locally to the hwmod.
@@ -131,6 +135,7 @@ struct omap_hwmod_dma_info {
 struct omap_hwmod_rst_info {
 	const char	*name;
 	u8		rst_shift;
+	u8		st_shift;
 };
 
 /**
@@ -178,7 +183,8 @@ struct omap_hwmod_omap2_firewall {
 #define ADDR_TYPE_RT		(1 << 1)
 
 /**
- * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * struct omap_hwmod_addr_space - address space handled by the hwmod
+ * @name: name of the address space
  * @pa_start: starting physical address
  * @pa_end: ending physical address
  * @flags: (see omap_hwmod_addr_space.flags macros above)
@@ -187,6 +193,7 @@ struct omap_hwmod_omap2_firewall {
  * structure.  GPMC is one example.
  */
 struct omap_hwmod_addr_space {
+	const char *name;
 	u32 pa_start;
 	u32 pa_end;
 	u8 flags;
@@ -370,9 +377,11 @@ struct omap_hwmod_omap4_prcm {
  *     of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
+ *     XXX Should be HWMOD_SETUP_NO_RESET
  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
  *     controller, etc. XXX probably belongs outside the main hwmod file
- * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ *     XXX Should be HWMOD_SETUP_NO_IDLE
+ * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
@@ -535,11 +544,12 @@ struct omap_hwmod {
 	const struct omap_chip_id	omap_chip;
 };
 
-int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod **ohs);
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
-int omap_hwmod_late_init(void);
+
+int __init omap_hwmod_setup_one(const char *name);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
 int _omap_hwmod_enable(struct omap_hwmod *oh);
@@ -555,6 +565,7 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 
 int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
 
 int omap_hwmod_reset(struct omap_hwmod *oh);
 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
@@ -589,6 +600,8 @@ int omap_hwmod_for_each_by_class(const char *classname,
 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
 u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 
+int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index affe87e9ece7..cbe897ca7f9e 100644
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
@@ -15,12 +15,20 @@
 #define ONENAND_SYNC_READ	(1 << 0)
 #define ONENAND_SYNC_READWRITE	(1 << 1)
 
+struct onenand_freq_info {
+	u16			maf_id;
+	u16			dev_id;
+	u16			ver_id;
+};
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
 	struct mtd_partition	*parts;
 	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *, int freq);
+	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
+	int		(*get_freq)(const struct onenand_freq_info *freq_info,
+				    bool *clk_dep);
 	int			dma_channel;
 	u8			flags;
 	u8			regulator_can_sleep;
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index 2fdf8c80d390..267f43bb2a4e 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -28,7 +28,6 @@
 #define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode, const char *cmd);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 			 const char *name);
 
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index efd87c8dda69..925b12b500dc 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -124,8 +124,14 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 			    struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+					  struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
 int omap2_sdrc_get_params(unsigned long r,
 			  struct omap_sdrc_params **sdrc_cs0,
 			  struct omap_sdrc_params **sdrc_cs1);
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 8ff605c83aca..2723f9166ea2 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -51,6 +51,11 @@
 #define OMAP4_UART3_BASE	0x48020000
 #define OMAP4_UART4_BASE	0x4806e000
 
+/* TI816X serial ports */
+#define TI816X_UART1_BASE	0x48020000
+#define TI816X_UART2_BASE	0x48022000
+#define TI816X_UART3_BASE	0x48024000
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -81,6 +86,9 @@
 #define OMAP4UART2		OMAP2UART2
 #define OMAP4UART3		43
 #define OMAP4UART4		44
+#define TI816XUART1		81
+#define TI816XUART2		82
+#define TI816XUART3		83
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
 /* This is only used by 8250.c for omap1510 */
@@ -96,7 +104,6 @@
 
 struct omap_board_data;
 
-extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern void omap_serial_init_port(struct omap_board_data *bdata);
 extern int omap_uart_can_sleep(void);
diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
deleted file mode 100644
index 6568c885f37a..000000000000
--- a/arch/arm/plat-omap/include/plat/smartreflex.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * OMAP Smartreflex Defines and Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
-
-#include <linux/platform_device.h>
-#include <plat/voltage.h>
-
-/*
- * Different Smartreflex IPs version. The v1 is the 65nm version used in
- * OMAP3430. The v2 is the update for the 45nm version of the IP
- * used in OMAP3630 and OMAP4430
- */
-#define SR_TYPE_V1	1
-#define SR_TYPE_V2	2
-
-/* SMART REFLEX REG ADDRESS OFFSET */
-#define SRCONFIG		0x00
-#define SRSTATUS		0x04
-#define SENVAL			0x08
-#define SENMIN			0x0C
-#define SENMAX			0x10
-#define SENAVG			0x14
-#define AVGWEIGHT		0x18
-#define NVALUERECIPROCAL	0x1c
-#define SENERROR_V1		0x20
-#define ERRCONFIG_V1		0x24
-#define IRQ_EOI			0x20
-#define IRQSTATUS_RAW		0x24
-#define IRQSTATUS		0x28
-#define IRQENABLE_SET		0x2C
-#define IRQENABLE_CLR		0x30
-#define SENERROR_V2		0x34
-#define ERRCONFIG_V2		0x38
-
-/* Bit/Shift Positions */
-
-/* SRCONFIG */
-#define SRCONFIG_ACCUMDATA_SHIFT	22
-#define SRCONFIG_SRCLKLENGTH_SHIFT	12
-#define SRCONFIG_SENNENABLE_V1_SHIFT	5
-#define SRCONFIG_SENPENABLE_V1_SHIFT	3
-#define SRCONFIG_SENNENABLE_V2_SHIFT	1
-#define SRCONFIG_SENPENABLE_V2_SHIFT	0
-#define SRCONFIG_CLKCTRL_SHIFT		0
-
-#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
-
-#define SRCONFIG_SRENABLE		BIT(11)
-#define SRCONFIG_SENENABLE		BIT(10)
-#define SRCONFIG_ERRGEN_EN		BIT(9)
-#define SRCONFIG_MINMAXAVG_EN		BIT(8)
-#define SRCONFIG_DELAYCTRL		BIT(2)
-
-/* AVGWEIGHT */
-#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
-#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
-
-/* NVALUERECIPROCAL */
-#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
-#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
-#define NVALUERECIPROCAL_RNSENP_SHIFT	8
-#define NVALUERECIPROCAL_RNSENN_SHIFT	0
-
-/* ERRCONFIG */
-#define ERRCONFIG_ERRWEIGHT_SHIFT	16
-#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
-#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
-
-#define SR_ERRWEIGHT_MASK		(0x07 << 16)
-#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
-#define SR_ERRMINLIMIT_MASK		(0xff << 0)
-
-#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
-#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
-#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
-#define ERRCONFIG_MCUACCUMINTST		BIT(28)
-#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
-#define ERRCONFIG_MCUVALIDINTST		BIT(26)
-#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
-#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
-#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
-#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
-#define ERRCONFIG_MCUDISACKINTST	BIT(22)
-#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
-
-#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
-					ERRCONFIG_MCUACCUMINTST | \
-					ERRCONFIG_MCUVALIDINTST | \
-					ERRCONFIG_MCUBOUNDINTST | \
-					ERRCONFIG_MCUDISACKINTST)
-/* IRQSTATUS */
-#define IRQSTATUS_MCUACCUMINT		BIT(3)
-#define IRQSTATUS_MCVALIDINT		BIT(2)
-#define IRQSTATUS_MCBOUNDSINT		BIT(1)
-#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
-
-/* IRQENABLE_SET and IRQENABLE_CLEAR */
-#define IRQENABLE_MCUACCUMINT		BIT(3)
-#define IRQENABLE_MCUVALIDINT		BIT(2)
-#define IRQENABLE_MCUBOUNDSINT		BIT(1)
-#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
-
-/* Common Bit values */
-
-#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
-#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
-#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
-#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
-#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
-
-/*
- * 3430 specific values. Maybe these should be passed from board file or
- * pmic structures.
- */
-#define OMAP3430_SR_ACCUMDATA		0x1f4
-
-#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
-#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
-
-#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
-#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
-
-#define OMAP3430_SR_ERRWEIGHT		0x04
-#define OMAP3430_SR_ERRMAXLIMIT		0x02
-
-/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
- *				pmic specific info to smartreflex driver
- *
- * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
- */
-struct omap_sr_pmic_data {
-	void (*sr_pmic_init) (void);
-};
-
-#ifdef CONFIG_OMAP_SMARTREFLEX
-/*
- * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
- * The smartreflex class driver should pass the class type.
- * Should be used to populate the class_type field of the
- * omap_smartreflex_class_data structure.
- */
-#define SR_CLASS1	0x1
-#define SR_CLASS2	0x2
-#define SR_CLASS3	0x3
-
-/**
- * struct omap_sr_class_data - Smartreflex class driver info
- *
- * @enable:		API to enable a particular class smaartreflex.
- * @disable:		API to disable a particular class smartreflex.
- * @configure:		API to configure a particular class smartreflex.
- * @notify:		API to notify the class driver about an event in SR.
- *			Not needed for class3.
- * @notify_flags:	specify the events to be notified to the class driver
- * @class_type:		specify which smartreflex class.
- *			Can be used by the SR driver to take any class
- *			based decisions.
- */
-struct omap_sr_class_data {
-	int (*enable)(struct voltagedomain *voltdm);
-	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
-	int (*configure)(struct voltagedomain *voltdm);
-	int (*notify)(struct voltagedomain *voltdm, u32 status);
-	u8 notify_flags;
-	u8 class_type;
-};
-
-/**
- * struct omap_sr_nvalue_table	- Smartreflex n-target value info
- *
- * @efuse_offs:	The offset of the efuse where n-target values are stored.
- * @nvalue:	The n-target value.
- */
-struct omap_sr_nvalue_table {
-	u32 efuse_offs;
-	u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type:		Smartreflex IP type.
- * @senp_mod:		SENPENABLE value for the sr
- * @senn_mod:		SENNENABLE value for sr
- * @nvalue_count:	Number of distinct nvalues in the nvalue table
- * @enable_on_init:	whether this sr module needs to enabled at
- *			boot up or not.
- * @nvalue_table:	table containing the  efuse offsets and nvalues
- *			corresponding to them.
- * @voltdm:		Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
-	int				ip_type;
-	u32				senp_mod;
-	u32				senn_mod;
-	int				nvalue_count;
-	bool				enable_on_init;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-};
-
-/* Smartreflex module enable/disable interface */
-void omap_sr_enable(struct voltagedomain *voltdm);
-void omap_sr_disable(struct voltagedomain *voltdm);
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
-
-/* API to register the pmic specific data with the smartreflex driver. */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
-
-/* Smartreflex driver hooks to be called from Smartreflex class driver */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
-void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_configure_minmax(struct voltagedomain *voltdm);
-
-/* API to register the smartreflex class driver with the smartreflex driver */
-int sr_register_class(struct omap_sr_class_data *class_data);
-#else
-static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable_reset_volt(
-		struct voltagedomain *voltdm) {}
-static inline void omap_sr_register_pmic(
-		struct omap_sr_pmic_data *pmic_data) {}
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index d0a119f735b4..c5fa9e929009 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -4,48 +4,14 @@
  */
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
 
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <plat/prcm.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset()		do {} while (0)
-#else
-extern void voiceblue_reset(void);
-#endif
+#include <asm/proc-fns.h>
 
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void omap1_arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
-				 DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	if (machine_is_voiceblue())
-		voiceblue_reset();
-	else
-		omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (!cpu_class_is_omap2())
-		omap1_arch_reset(mode, cmd);
-	else
-		omap_prcm_arch_reset(mode, cmd);
-}
+extern void (*arch_reset)(char, const char *);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti816x.h
new file mode 100644
index 000000000000..50510f5dda1e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/ti816x.h
@@ -0,0 +1,27 @@
+/*
+ * This file contains the address data for various TI816X modules.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TI816X_H
+#define __ASM_ARCH_TI816X_H
+
+#define L4_SLOW_TI816X_BASE	0x48000000
+
+#define TI816X_SCM_BASE		0x48140000
+#define TI816X_CTRL_BASE	TI816X_SCM_BASE
+#define TI816X_PRCM_BASE	0x48180000
+
+#define TI816X_ARM_INTC_BASE	0x48200000
+
+#endif /* __ASM_ARCH_TI816X_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ad98b85cae21..30b891c4a93f 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -93,6 +93,10 @@ static inline void flush(void)
 #define DEBUG_LL_ZOOM(mach)						\
 	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
+#define DEBUG_LL_TI816X(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		TI816XUART##p)
+
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
 	int port = 0;
@@ -166,6 +170,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_ZOOM(omap_zoom2);
 		DEBUG_LL_ZOOM(omap_zoom3);
 
+		/* TI8168 base boards using UART3 */
+		DEBUG_LL_TI816X(3, ti8168evm);
+
 	} while (0);
 }
 
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index fe449f1a1c14..02b96c8f6a17 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -110,6 +110,11 @@ extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
 #endif
 
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_musb_set_mode(u8 musb_mode);
+
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
deleted file mode 100644
index 5bd204e55c32..000000000000
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
-#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
-
-#include <linux/err.h>
-
-#define VOLTSCALE_VPFORCEUPDATE		1
-#define VOLTSCALE_VCBYPASS		2
-
-/*
- * OMAP3 GENERIC setup times. Revisit to see if these needs to be
- * passed from board or PMIC file
- */
-#define OMAP3_CLKSETUP		0xff
-#define OMAP3_VOLTOFFSET	0xff
-#define OMAP3_VOLTSETUP2	0xff
-
-/* Voltage value defines */
-#define OMAP3430_VDD_MPU_OPP1_UV		975000
-#define OMAP3430_VDD_MPU_OPP2_UV		1075000
-#define OMAP3430_VDD_MPU_OPP3_UV		1200000
-#define OMAP3430_VDD_MPU_OPP4_UV		1270000
-#define OMAP3430_VDD_MPU_OPP5_UV		1350000
-
-#define OMAP3430_VDD_CORE_OPP1_UV		975000
-#define OMAP3430_VDD_CORE_OPP2_UV		1050000
-#define OMAP3430_VDD_CORE_OPP3_UV		1150000
-
-#define OMAP3630_VDD_MPU_OPP50_UV		1012500
-#define OMAP3630_VDD_MPU_OPP100_UV		1200000
-#define OMAP3630_VDD_MPU_OPP120_UV		1325000
-#define OMAP3630_VDD_MPU_OPP1G_UV		1375000
-
-#define OMAP3630_VDD_CORE_OPP50_UV		1000000
-#define OMAP3630_VDD_CORE_OPP100_UV		1200000
-
-#define OMAP4430_VDD_MPU_OPP50_UV		930000
-#define OMAP4430_VDD_MPU_OPP100_UV		1100000
-#define OMAP4430_VDD_MPU_OPPTURBO_UV		1260000
-#define OMAP4430_VDD_MPU_OPPNITRO_UV		1350000
-
-#define OMAP4430_VDD_IVA_OPP50_UV		930000
-#define OMAP4430_VDD_IVA_OPP100_UV		1100000
-#define OMAP4430_VDD_IVA_OPPTURBO_UV		1260000
-
-#define OMAP4430_VDD_CORE_OPP50_UV		930000
-#define OMAP4430_VDD_CORE_OPP100_UV		1100000
-
-/**
- * struct voltagedomain - omap voltage domain global structure.
- * @name:	Name of the voltage domain which can be used as a unique
- *		identifier.
- */
-struct voltagedomain {
-	char *name;
-};
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-
-/**
- * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
- * @slew_rate:	PMIC slew rate (in uv/us)
- * @step_size:	PMIC voltage step size (in uv)
- * @vsel_to_uv:	PMIC API to convert vsel value to actual voltage in uV.
- * @uv_to_vsel:	PMIC API to convert voltage in uV to vsel value.
- */
-struct omap_volt_pmic_info {
-	int slew_rate;
-	int step_size;
-	u32 on_volt;
-	u32 onlp_volt;
-	u32 ret_volt;
-	u32 off_volt;
-	u16 volt_setup_time;
-	u8 vp_erroroffset;
-	u8 vp_vstepmin;
-	u8 vp_vstepmax;
-	u8 vp_vddmin;
-	u8 vp_vddmax;
-	u8 vp_timeout_us;
-	u8 i2c_slave_addr;
-	u8 pmic_reg;
-	unsigned long (*vsel_to_uv) (const u8 vsel);
-	u8 (*uv_to_vsel) (unsigned long uV);
-};
-
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
-		unsigned long target_volt);
-void omap_voltage_reset(struct voltagedomain *voltdm);
-void omap_voltage_get_volttable(struct voltagedomain *voltdm,
-		struct omap_volt_data **volt_data);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
-		unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-#ifdef CONFIG_PM
-int omap_voltage_register_pmic(struct voltagedomain *voltdm,
-		struct omap_volt_pmic_info *pmic_info);
-void omap_change_voltscale_method(struct voltagedomain *voltdm,
-		int voltscale_method);
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
-int omap_voltage_late_init(void);
-#else
-static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
-		struct omap_volt_pmic_info *pmic_info)
-{
-	return -EINVAL;
-}
-static inline  void omap_change_voltscale_method(struct voltagedomain *voltdm,
-		int voltscale_method) {}
-static inline int omap_voltage_late_init(void)
-{
-	return -EINVAL;
-}
-static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif
-
-#endif