pinctrl/nomadik: merge old pincfg header

This merges the old <plat/pincfg.h> header into
<linux/platform_data/pinctrl-nomadik.h> and rids us of
yet one more <plat/*> include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 173 deletions

diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
deleted file mode 100644
index 3b8ec60af351..000000000000
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- *
- * Based on arch/arm/mach-pxa/include/mach/mfp.h:
- *   Copyright (C) 2007 Marvell International Ltd.
- *   eric miao <eric.miao@marvell.com>
- */
-
-#ifndef __PLAT_PINCFG_H
-#define __PLAT_PINCFG_H
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- *	bit  0.. 8 - Pin Number (512 Pins Maximum)
- *	bit  9..10 - Alternate Function Selection
- *	bit 11..12 - Pull up/down state
- *	bit     13 - Sleep mode behaviour
- *	bit     14 - Direction
- *	bit     15 - Value (if output)
- *	bit 16..18 - SLPM pull up/down state
- *	bit 19..20 - SLPM direction
- *	bit 21..22 - SLPM Value (if output)
- *	bit 23..25 - PDIS value (if input)
- *	bit	26 - Gpio mode
- *	bit	27 - Sleep mode
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- *		     pull up/down = disabled
- *		     sleep mode = input/wakeup
- *		     direction = input
- *		     value = low
- *		     SLPM direction = same as normal
- *		     SLPM pull = same as normal
- *		     SLPM value = same as normal
- *
- * PIN_CFG	   - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK		0x1ff
-#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT		9
-#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT		11
-#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT		13
-#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
-
-#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
-#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
-
-#define PIN_DIR_SHIFT		14
-#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT		15
-#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT	16
-#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x)	\
-	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE	\
-	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP	\
-	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN	\
-	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT	19
-#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x)		\
-	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT	21
-#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x)		\
-	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-#define PIN_SLPM_PDIS_SHIFT		23
-#define PIN_SLPM_PDIS_MASK		(0x3 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS(x)	\
-	(((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_NO_CHANGE		(0 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_DISABLED		(1 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_ENABLED		(2 << PIN_SLPM_PDIS_SHIFT)
-
-#define PIN_LOWEMI_SHIFT	25
-#define PIN_LOWEMI_MASK		(0x1 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI(x)		(((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
-
-#define PIN_GPIOMODE_SHIFT	26
-#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
-
-#define PIN_SLEEPMODE_SHIFT	27
-#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
-
-
-/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
-#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT		(0)
-
-#define PIN_CFG(num, alt)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
-extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
-extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-
-#endif