Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

24 files changed, 1613 insertions, 397 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 53ebb429e971..b549a8fb4231 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -3,16 +3,18 @@
 #
 
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
-				   id.o
+				   id.o usb.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
 obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
-				board-mop500-keypads.o
+				board-mop500-regulators.o \
+				board-mop500-uib.o board-mop500-stuib.o \
+				board-mop500-u8500uib.o \
+				board-mop500-pins.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
-obj-$(CONFIG_REGULATOR_AB8500)	+= board-mop500-regulators.o
 obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
 obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
deleted file mode 100644
index 70318c354d32..000000000000
--- a/arch/arm/mach-ux500/board-mop500-keypads.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Keypad layouts for various boards
- */
-
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include <plat/pincfg.h>
-#include <plat/ske.h>
-
-#include <mach/devices.h>
-#include <mach/hardware.h>
-
-#include "devices-db8500.h"
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0      164
-#define ROW_PIN_I1      163
-#define ROW_PIN_I2      162
-#define ROW_PIN_I3      161
-#define ROW_PIN_I4      156
-#define ROW_PIN_I5      155
-#define ROW_PIN_I6      154
-#define ROW_PIN_I7      153
-#define COL_PIN_O0      168
-#define COL_PIN_O1      167
-#define COL_PIN_O2      166
-#define COL_PIN_O3      165
-#define COL_PIN_O4      160
-#define COL_PIN_O5      159
-#define COL_PIN_O6      158
-#define COL_PIN_O7      157
-
-#define SKE_KPD_MAX_ROWS	8
-#define SKE_KPD_MAX_COLS	8
-
-static int ske_kp_rows[] = {
-	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
-	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
-};
-
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
-{
-	int ret;
-
-	ret = gpio_request(gpio, "ske-kp");
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio request failed\n");
-		return ret;
-	}
-
-	ret = gpio_direction_output(gpio, 1);
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio direction failed\n");
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
-{
-	int ret, i;
-
-	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
-		ret = ske_set_gpio_row(ske_kp_rows[i]);
-		if (ret < 0) {
-			pr_err("ske_kp_init: failed init\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static struct ske_keypad_platform_data ske_keypad_board = {
-	.init		= ske_kp_init,
-	.keymap_data    = &mop500_keymap_data,
-	.no_autorepeat  = true,
-	.krow		= SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
-	.kcol		= SKE_KPD_MAX_COLS,
-	.debounce_ms    = 40,			/* in millisecs */
-};
-
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id             = 1,
-	.blocks         = STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad         = &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * TC35893
- */
-
-static const unsigned int uib_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data uib_keymap_data = {
-	.keymap         = uib_keymap,
-	.keymap_size    = ARRAY_SIZE(uib_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &uib_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info mop500_i2c0_devices_uib[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-void mop500_keypad_init(void)
-{
-	db8500_add_ske_keypad(&ske_keypad_board);
-
-	i2c_register_board_info(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	i2c_register_board_info(0, mop500_i2c0_devices_uib,
-			ARRAY_SIZE(mop500_i2c0_devices_uib));
-
-}
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
new file mode 100644
index 000000000000..fd4cf1ca5efd
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <plat/pincfg.h>
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins_common[] = {
+	/* I2C */
+	GPIO147_I2C0_SCL,
+	GPIO148_I2C0_SDA,
+	GPIO16_I2C1_SCL,
+	GPIO17_I2C1_SDA,
+	GPIO10_I2C2_SDA,
+	GPIO11_I2C2_SCL,
+	GPIO229_I2C3_SDA,
+	GPIO230_I2C3_SCL,
+
+	/* MSP0 */
+	GPIO12_MSP0_TXD,
+	GPIO13_MSP0_TFS,
+	GPIO14_MSP0_TCK,
+	GPIO15_MSP0_RXD,
+
+	/* MSP2: HDMI */
+	GPIO193_MSP2_TXD,
+	GPIO194_MSP2_TCK,
+	GPIO195_MSP2_TFS,
+	GPIO196_MSP2_RXD | PIN_OUTPUT_LOW,
+
+	/* Touch screen INTERFACE */
+	GPIO84_GPIO	| PIN_INPUT_PULLUP, /* TOUCH_INT1 */
+
+	/* STMPE1601/tc35893 keypad  IRQ */
+	GPIO218_GPIO	| PIN_INPUT_PULLUP,
+
+	/* MMC0 (MicroSD card) */
+	GPIO18_MC0_CMDDIR	| PIN_OUTPUT_HIGH,
+	GPIO19_MC0_DAT0DIR	| PIN_OUTPUT_HIGH,
+	GPIO20_MC0_DAT2DIR	| PIN_OUTPUT_HIGH,
+
+	GPIO22_MC0_FBCLK	| PIN_INPUT_NOPULL,
+	GPIO23_MC0_CLK		| PIN_OUTPUT_LOW,
+	GPIO24_MC0_CMD		| PIN_INPUT_PULLUP,
+	GPIO25_MC0_DAT0		| PIN_INPUT_PULLUP,
+	GPIO26_MC0_DAT1		| PIN_INPUT_PULLUP,
+	GPIO27_MC0_DAT2		| PIN_INPUT_PULLUP,
+	GPIO28_MC0_DAT3		| PIN_INPUT_PULLUP,
+
+	/* SDI1 (SDIO) */
+	GPIO208_MC1_CLK		| PIN_OUTPUT_LOW,
+	GPIO209_MC1_FBCLK	| PIN_INPUT_NOPULL,
+	GPIO210_MC1_CMD		| PIN_INPUT_PULLUP,
+	GPIO211_MC1_DAT0	| PIN_INPUT_PULLUP,
+	GPIO212_MC1_DAT1	| PIN_INPUT_PULLUP,
+	GPIO213_MC1_DAT2	| PIN_INPUT_PULLUP,
+	GPIO214_MC1_DAT3	| PIN_INPUT_PULLUP,
+
+	/* MMC2 (On-board DATA INTERFACE eMMC) */
+	GPIO128_MC2_CLK		| PIN_OUTPUT_LOW,
+	GPIO129_MC2_CMD		| PIN_INPUT_PULLUP,
+	GPIO130_MC2_FBCLK	| PIN_INPUT_NOPULL,
+	GPIO131_MC2_DAT0	| PIN_INPUT_PULLUP,
+	GPIO132_MC2_DAT1	| PIN_INPUT_PULLUP,
+	GPIO133_MC2_DAT2	| PIN_INPUT_PULLUP,
+	GPIO134_MC2_DAT3	| PIN_INPUT_PULLUP,
+	GPIO135_MC2_DAT4	| PIN_INPUT_PULLUP,
+	GPIO136_MC2_DAT5	| PIN_INPUT_PULLUP,
+	GPIO137_MC2_DAT6	| PIN_INPUT_PULLUP,
+	GPIO138_MC2_DAT7	| PIN_INPUT_PULLUP,
+
+	/* MMC4 (On-board STORAGE INTERFACE eMMC) */
+	GPIO197_MC4_DAT3	| PIN_INPUT_PULLUP,
+	GPIO198_MC4_DAT2	| PIN_INPUT_PULLUP,
+	GPIO199_MC4_DAT1	| PIN_INPUT_PULLUP,
+	GPIO200_MC4_DAT0	| PIN_INPUT_PULLUP,
+	GPIO201_MC4_CMD		| PIN_INPUT_PULLUP,
+	GPIO202_MC4_FBCLK	| PIN_INPUT_NOPULL,
+	GPIO203_MC4_CLK		| PIN_OUTPUT_LOW,
+	GPIO204_MC4_DAT7	| PIN_INPUT_PULLUP,
+	GPIO205_MC4_DAT6	| PIN_INPUT_PULLUP,
+	GPIO206_MC4_DAT5	| PIN_INPUT_PULLUP,
+	GPIO207_MC4_DAT4	| PIN_INPUT_PULLUP,
+
+	/* SKE keypad */
+	GPIO153_KP_I7,
+	GPIO154_KP_I6,
+	GPIO155_KP_I5,
+	GPIO156_KP_I4,
+	GPIO157_KP_O7,
+	GPIO158_KP_O6,
+	GPIO159_KP_O5,
+	GPIO160_KP_O4,
+	GPIO161_KP_I3,
+	GPIO162_KP_I2,
+	GPIO163_KP_I1,
+	GPIO164_KP_I0,
+	GPIO165_KP_O3,
+	GPIO166_KP_O2,
+	GPIO167_KP_O1,
+	GPIO168_KP_O0,
+
+	/* UART */
+	GPIO0_U0_CTSn	| PIN_INPUT_PULLUP,
+	GPIO1_U0_RTSn	| PIN_OUTPUT_HIGH,
+	GPIO2_U0_RXD	| PIN_INPUT_PULLUP,
+	GPIO3_U0_TXD	| PIN_OUTPUT_HIGH,
+
+	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
+	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
+	GPIO31_U2_CTSn	| PIN_INPUT_PULLUP,
+	GPIO32_U2_RTSn	| PIN_OUTPUT_HIGH,
+
+	/* Display & HDMI HW sync */
+	GPIO68_LCD_VSI0	| PIN_INPUT_PULLUP,
+	GPIO69_LCD_VSI1	| PIN_INPUT_PULLUP,
+};
+
+static pin_cfg_t mop500_pins_default[] = {
+	/* SSP0 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+	GPIO146_SSP0_TXD,
+
+
+	GPIO217_GPIO	| PIN_INPUT_PULLUP, /* TC35892 IRQ */
+
+	/* SDI0 (MicroSD card) */
+	GPIO21_MC0_DAT31DIR	| PIN_OUTPUT_HIGH,
+
+	/* UART */
+	GPIO4_U1_RXD	| PIN_INPUT_PULLUP,
+	GPIO5_U1_TXD	| PIN_OUTPUT_HIGH,
+	GPIO6_U1_CTSn	| PIN_INPUT_PULLUP,
+	GPIO7_U1_RTSn	| PIN_OUTPUT_HIGH,
+};
+
+static pin_cfg_t mop500_pins_hrefv60[] = {
+	/* WLAN */
+	GPIO4_GPIO		| PIN_INPUT_PULLUP,/* WLAN_IRQ */
+	GPIO85_GPIO		| PIN_OUTPUT_LOW,/* WLAN_ENA */
+
+	/* XENON Flashgun INTERFACE */
+	GPIO6_IP_GPIO0	| PIN_INPUT_PULLUP,/* XENON_FLASH_ID */
+	GPIO7_IP_GPIO1	| PIN_INPUT_PULLUP,/* XENON_READY */
+	GPIO170_GPIO	| PIN_OUTPUT_LOW, /* XENON_CHARGE */
+
+	/* Assistant LED INTERFACE */
+	GPIO21_GPIO | PIN_OUTPUT_LOW,  /* XENON_EN1 */
+	GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW,  /* XENON_EN2 */
+
+	/* Magnetometer */
+	GPIO31_GPIO | PIN_INPUT_PULLUP,  /* magnetometer_INT */
+	GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */
+
+	/* Display Interface */
+	GPIO65_GPIO		| PIN_OUTPUT_LOW, /* DISP1 RST */
+	GPIO66_GPIO		| PIN_OUTPUT_LOW, /* DISP2 RST */
+
+	/* Touch screen INTERFACE */
+	GPIO143_GPIO	| PIN_OUTPUT_LOW,/*TOUCH_RST1 */
+
+	/* Touch screen INTERFACE 2 */
+	GPIO67_GPIO	| PIN_INPUT_PULLUP, /* TOUCH_INT2 */
+	GPIO146_GPIO	| PIN_OUTPUT_LOW,/*TOUCH_RST2 */
+
+	/* ETM_PTM_TRACE INTERFACE */
+	GPIO70_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */
+	GPIO71_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */
+	GPIO72_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */
+	GPIO73_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */
+	GPIO74_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */
+
+	/* NAHJ INTERFACE */
+	GPIO76_GPIO	| PIN_OUTPUT_LOW,/* NAHJ_CTRL */
+	GPIO216_GPIO	| PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */
+
+	/* NFC INTERFACE */
+	GPIO77_GPIO	| PIN_OUTPUT_LOW, /* NFC_ENA */
+	GPIO144_GPIO	| PIN_INPUT_PULLDOWN, /* NFC_IRQ */
+	GPIO142_GPIO	| PIN_OUTPUT_LOW, /* NFC_RESET */
+
+	/* Keyboard MATRIX INTERFACE */
+	GPIO90_MC5_CMD	| PIN_OUTPUT_LOW, /* KP_O_1 */
+	GPIO87_MC5_DAT1	| PIN_OUTPUT_LOW, /* KP_O_2 */
+	GPIO86_MC5_DAT0	| PIN_OUTPUT_LOW, /* KP_O_3 */
+	GPIO96_KP_O6	| PIN_OUTPUT_LOW, /* KP_O_6 */
+	GPIO94_KP_O7	| PIN_OUTPUT_LOW, /* KP_O_7 */
+	GPIO93_MC5_DAT4	| PIN_INPUT_PULLUP, /* KP_I_0 */
+	GPIO89_MC5_DAT3	| PIN_INPUT_PULLUP, /* KP_I_2 */
+	GPIO88_MC5_DAT2	| PIN_INPUT_PULLUP, /* KP_I_3 */
+	GPIO91_GPIO	| PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */
+	GPIO92_GPIO	| PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */
+	GPIO97_GPIO	| PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */
+
+	/* DiPro Sensor Interface */
+	GPIO139_GPIO	| PIN_INPUT_PULLUP, /* DIPRO_INT */
+
+	/* HAL SWITCH INTERFACE */
+	GPIO145_GPIO	| PIN_INPUT_PULLDOWN,/* HAL_SW */
+
+	/* Audio Amplifier Interface */
+	GPIO149_GPIO	| PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */
+
+	/* GBF INTERFACE */
+	GPIO171_GPIO	| PIN_OUTPUT_LOW, /* GBF_ENA_RESET */
+
+	/* MSP : HDTV INTERFACE */
+	GPIO192_GPIO	| PIN_INPUT_PULLDOWN,
+
+	/* ACCELEROMETER_INTERFACE */
+	GPIO82_GPIO		| PIN_INPUT_PULLUP, /* ACC_INT1 */
+	GPIO83_GPIO		| PIN_INPUT_PULLUP, /* ACC_INT2 */
+
+	/* Proximity Sensor */
+	GPIO217_GPIO		| PIN_INPUT_PULLUP,
+
+
+};
+
+void __init mop500_pins_init(void)
+{
+	nmk_config_pins(mop500_pins_common,
+				ARRAY_SIZE(mop500_pins_common));
+	if (machine_is_hrefv60())
+		nmk_config_pins(mop500_pins_hrefv60,
+				ARRAY_SIZE(mop500_pins_hrefv60));
+	else
+		nmk_config_pins(mop500_pins_default,
+				ARRAY_SIZE(mop500_pins_default));
+}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 533967c2d095..875c91b2f8a4 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -11,6 +11,56 @@
 #include <linux/kernel.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>
+#include "board-mop500-regulators.h"
+
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+	/* External displays, connector on board 2v5 power supply */
+	REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
+	/* SFH7741 proximity sensor */
+	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
+	/* BH1780GLS ambient light sensor */
+	REGULATOR_SUPPLY("vcc", "2-0029"),
+	/* lsm303dlh accelerometer */
+	REGULATOR_SUPPLY("vdd", "3-0018"),
+	/* lsm303dlh magnetometer */
+	REGULATOR_SUPPLY("vdd", "3-001e"),
+	/* Rohm BU21013 Touchscreen devices */
+	REGULATOR_SUPPLY("avdd", "3-005c"),
+	REGULATOR_SUPPLY("avdd", "3-005d"),
+	/* Synaptics RMI4 Touchscreen device */
+	REGULATOR_SUPPLY("vdd", "3-004b"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
+	/* On-board eMMC power */
+	REGULATOR_SUPPLY("vmmc", "sdi4"),
+	/* AB8500 audio codec */
+	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+	/* External MMC slot power */
+	REGULATOR_SUPPLY("vmmc", "sdi0"),
+};
+
+static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
+	/* TV-out DENC supply */
+	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
+	/* Internal general-purpose ADC */
+	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
+	/* SoC core supply, no device */
+	REGULATOR_SUPPLY("v-intcore", NULL),
+	/* USB Transciever */
+	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+	/* External displays, connector on board, 1v8 power supply */
+	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
+};
 
 /* AB8500 regulators */
 struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
@@ -23,6 +73,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+		.consumer_supplies = ab8500_vaux1_consumers,
 	},
 	/* supplies to the on-board eMMC */
 	[AB8500_LDO_AUX2] = {
@@ -33,6 +85,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
+		.consumer_supplies = ab8500_vaux2_consumers,
 	},
 	/* supply for VAUX3, supplies to SDcard slots */
 	[AB8500_LDO_AUX3] = {
@@ -43,6 +97,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
+		.consumer_supplies = ab8500_vaux3_consumers,
 	},
 	/* supply for tvout, gpadc, TVOUT LDO */
 	[AB8500_LDO_TVOUT] = {
@@ -50,6 +106,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-TVOUT",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
+		.consumer_supplies = ab8500_vtvout_consumers,
 	},
 	/* supply for ab8500-vaudio, VAUDIO LDO */
 	[AB8500_LDO_AUDIO] = {
@@ -85,6 +143,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-INTCORE",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
+		.consumer_supplies = ab8500_vintcore_consumers,
 	},
 	/* supply for U8500 CSI/DSI, VANA LDO */
 	[AB8500_LDO_ANA] = {
@@ -92,5 +152,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-CSI/DSI",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+		.consumer_supplies = ab8500_vana_consumers,
 	},
 };
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 4b996676594e..bf0b02414e5b 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -12,56 +12,14 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 
-#include <plat/pincfg.h>
+#include <asm/mach-types.h>
+#include <plat/ste_dma40.h>
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 #include "board-mop500.h"
-
-static pin_cfg_t mop500_sdi_pins[] = {
-	/* SDI0 (MicroSD slot) */
-	GPIO18_MC0_CMDDIR,
-	GPIO19_MC0_DAT0DIR,
-	GPIO20_MC0_DAT2DIR,
-	GPIO21_MC0_DAT31DIR,
-	GPIO22_MC0_FBCLK,
-	GPIO23_MC0_CLK,
-	GPIO24_MC0_CMD,
-	GPIO25_MC0_DAT0,
-	GPIO26_MC0_DAT1,
-	GPIO27_MC0_DAT2,
-	GPIO28_MC0_DAT3,
-
-	/* SDI4 (on-board eMMC) */
-	GPIO197_MC4_DAT3,
-	GPIO198_MC4_DAT2,
-	GPIO199_MC4_DAT1,
-	GPIO200_MC4_DAT0,
-	GPIO201_MC4_CMD,
-	GPIO202_MC4_FBCLK,
-	GPIO203_MC4_CLK,
-	GPIO204_MC4_DAT7,
-	GPIO205_MC4_DAT6,
-	GPIO206_MC4_DAT5,
-	GPIO207_MC4_DAT4,
-};
-
-static pin_cfg_t mop500_sdi2_pins[] = {
-	/* SDI2 (POP eMMC) */
-	GPIO128_MC2_CLK,
-	GPIO129_MC2_CMD,
-	GPIO130_MC2_FBCLK,
-	GPIO131_MC2_DAT0,
-	GPIO132_MC2_DAT1,
-	GPIO133_MC2_DAT2,
-	GPIO134_MC2_DAT3,
-	GPIO135_MC2_DAT4,
-	GPIO136_MC2_DAT5,
-	GPIO137_MC2_DAT6,
-	GPIO138_MC2_DAT7,
-};
+#include "ste-dma40-db8500.h"
 
 /*
  * SDI 0 (MicroSD slot)
@@ -86,48 +44,134 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
 	       MCI_DATA2DIREN | MCI_DATA31DIREN;
 }
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data mop500_sdi0_data = {
 	.vdd_handler	= mop500_sdi0_vdd_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 100000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA,
-	.gpio_cd	= GPIO_SDMMC_CD,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &mop500_sdi0_dma_cfg_rx,
+	.dma_tx_param	= &mop500_sdi0_dma_cfg_tx,
+#endif
 };
 
-void mop500_sdi_tc35892_init(void)
+/* GPIO pins used by the sdi0 level shifter */
+static int sdi0_en = -1;
+static int sdi0_vsel = -1;
+
+static void sdi0_configure(void)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN");
+	ret = gpio_request(sdi0_en, "level shifter enable");
 	if (!ret)
-		ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL,
-				   "GPIO_SDMMC_1V8_3V_SEL");
-	if (ret)
+		ret = gpio_request(sdi0_vsel,
+				   "level shifter 1v8-3v select");
+
+	if (ret) {
+		pr_warning("unable to config sdi0 gpios for level shifter.\n");
 		return;
+	}
 
-	gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1);
-	gpio_direction_output(GPIO_SDMMC_EN, 0);
+	/* Select the default 2.9V and enable level shifter */
+	gpio_direction_output(sdi0_vsel, 0);
+	gpio_direction_output(sdi0_en, 1);
 
+	/* Add the device */
 	db8500_add_sdi0(&mop500_sdi0_data);
 }
 
+void mop500_sdi_tc35892_init(void)
+{
+	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
+	sdi0_en = GPIO_SDMMC_EN;
+	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
+	sdi0_configure();
+}
+
 /*
  * SDI 2 (POP eMMC, not on DB8500ed)
  */
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV28_SD_MM2_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
 	.f_max		= 100000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &mop500_sdi2_dma_cfg_rx,
+	.dma_tx_param	= &mop500_sdi2_dma_cfg_tx,
+#endif
 };
 
 /*
  * SDI 4 (on-board eMMC)
  */
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV42_SD_MM4_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data mop500_sdi4_data = {
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 100000000,
@@ -135,26 +179,32 @@ static struct mmci_platform_data mop500_sdi4_data = {
 			  MMC_CAP_MMC_HIGHSPEED,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &mop500_sdi4_dma_cfg_rx,
+	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
+#endif
 };
 
 void __init mop500_sdi_init(void)
 {
-	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
+	/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
+	if (!cpu_is_u8500v10())
+		mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+	db8500_add_sdi2(&mop500_sdi2_data);
+
+	/* On-board eMMC */
+	db8500_add_sdi4(&mop500_sdi4_data);
 
+	if (machine_is_hrefv60()) {
+		mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+		sdi0_en = HREFV60_SDMMC_EN_GPIO;
+		sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+		sdi0_configure();
+	}
 	/*
-	 * sdi0 will finally be added when the TC35892 initializes and calls
+	 * On boards with the TC35892 GPIO expander, sdi0 will finally
+	 * be added when the TC35892 initializes and calls
 	 * mop500_sdi_tc35892_init() above.
 	 */
-
-	/* PoP:ed eMMC */
-	if (!cpu_is_u8500ed()) {
-		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
-		/* POP eMMC on v1.0 has problems with high speed */
-		if (!cpu_is_u8500v10())
-			mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-		db8500_add_sdi2(&mop500_sdi2_data);
-	}
-
-	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data);
 }
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
new file mode 100644
index 000000000000..8c979770d872
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/input/bu21013.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input/matrix_keypad.h>
+#include <asm/mach-types.h>
+
+#include "board-mop500.h"
+
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+	KEY(2, 5, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(3, 5, KEY_VOLUMEDOWN),
+	KEY(1, 3, KEY_3),
+	KEY(5, 2, KEY_RIGHT),
+	KEY(5, 0, KEY_9),
+
+	KEY(0, 5, KEY_MENU),
+	KEY(7, 6, KEY_ENTER),
+	KEY(4, 5, KEY_0),
+	KEY(6, 7, KEY_2),
+	KEY(3, 4, KEY_UP),
+	KEY(3, 3, KEY_DOWN),
+
+	KEY(6, 4, KEY_SEND),
+	KEY(6, 2, KEY_BACK),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_1),
+	KEY(4, 3, KEY_LEFT),
+	KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+	.keymap		= mop500_keymap,
+	.keymap_size    = ARRAY_SIZE(mop500_keymap),
+};
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+	.debounce_ms    = 64,
+	.scan_count     = 8,
+	.no_autorepeat  = true,
+	.keymap_data    = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+	.id		= 1,
+	.blocks		= STMPE_BLOCK_KEYPAD,
+	.irq_trigger    = IRQF_TRIGGER_FALLING,
+	.irq_base       = MOP500_STMPE1601_IRQ(0),
+	.keypad		= &stmpe1601_keypad_data,
+	.autosleep      = true,
+	.autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
+	{
+		I2C_BOARD_INFO("stmpe1601", 0x40),
+		.irq = NOMADIK_GPIO_TO_IRQ(218),
+		.platform_data = &stmpe1601_data,
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
+/*
+ * BU21013 ROHM touchscreen interface on the STUIBs
+ */
+
+/* tracks number of bu21013 devices being enabled */
+static int bu21013_devices;
+
+#define TOUCH_GPIO_PIN  84
+
+#define TOUCH_XMAX	384
+#define TOUCH_YMAX	704
+
+#define PRCMU_CLOCK_OCR		0x1CC
+#define TSC_EXT_CLOCK_9_6MHZ	0x840000
+
+/**
+ * bu21013_gpio_board_init : configures the touch panel.
+ * @reset_pin: reset pin number
+ * This function can be used to configures
+ * the voltage and reset the touch panel controller.
+ */
+static int bu21013_gpio_board_init(int reset_pin)
+{
+	int retval = 0;
+
+	bu21013_devices++;
+	if (bu21013_devices == 1) {
+		retval = gpio_request(reset_pin, "touchp_reset");
+		if (retval) {
+			printk(KERN_ERR "Unable to request gpio reset_pin");
+			return retval;
+		}
+		retval = gpio_direction_output(reset_pin, 1);
+		if (retval < 0) {
+			printk(KERN_ERR "%s: gpio direction failed\n",
+					__func__);
+			return retval;
+		}
+	}
+
+	return retval;
+}
+
+/**
+ * bu21013_gpio_board_exit : deconfigures the touch panel controller
+ * @reset_pin: reset pin number
+ * This function can be used to deconfigures the chip selection
+ * for touch panel controller.
+ */
+static int bu21013_gpio_board_exit(int reset_pin)
+{
+	int retval = 0;
+
+	if (bu21013_devices == 1) {
+		retval = gpio_direction_output(reset_pin, 0);
+		if (retval < 0) {
+			printk(KERN_ERR "%s: gpio direction failed\n",
+					__func__);
+			return retval;
+		}
+		gpio_set_value(reset_pin, 0);
+	}
+	bu21013_devices--;
+
+	return retval;
+}
+
+/**
+ * bu21013_read_pin_val : get the interrupt pin value
+ * This function can be used to get the interrupt pin value for touch panel
+ * controller.
+ */
+static int bu21013_read_pin_val(void)
+{
+	return gpio_get_value(TOUCH_GPIO_PIN);
+}
+
+static struct bu21013_platform_device tsc_plat_device = {
+	.cs_en = bu21013_gpio_board_init,
+	.cs_dis = bu21013_gpio_board_exit,
+	.irq_read_val = bu21013_read_pin_val,
+	.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+	.touch_x_max = TOUCH_XMAX,
+	.touch_y_max = TOUCH_YMAX,
+	.ext_clk = false,
+	.x_flip = false,
+	.y_flip = true,
+};
+
+static struct bu21013_platform_device tsc_plat2_device = {
+	.cs_en = bu21013_gpio_board_init,
+	.cs_dis = bu21013_gpio_board_exit,
+	.irq_read_val = bu21013_read_pin_val,
+	.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+	.touch_x_max = TOUCH_XMAX,
+	.touch_y_max = TOUCH_YMAX,
+	.ext_clk = false,
+	.x_flip = false,
+	.y_flip = true,
+};
+
+static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
+	{
+		I2C_BOARD_INFO("bu21013_tp", 0x5C),
+		.platform_data = &tsc_plat_device,
+	},
+	{
+		I2C_BOARD_INFO("bu21013_tp", 0x5D),
+		.platform_data = &tsc_plat2_device,
+	},
+
+};
+
+void __init mop500_stuib_init(void)
+{
+	if (machine_is_hrefv60()) {
+		tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
+		tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
+	} else {
+		tsc_plat_device.cs_pin = GPIO_BU21013_CS;
+		tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
+
+	}
+
+	mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
+			ARRAY_SIZE(mop500_i2c0_devices_stuib));
+
+	mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
+			ARRAY_SIZE(u8500_i2c3_devices_stuib));
+}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
new file mode 100644
index 000000000000..d8a8734a0eba
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Board data for the U8500 UIB, also known as the New UIB
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/input/matrix_keypad.h>
+#include <../drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h>
+
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+#include "board-mop500.h"
+
+/*
+ * Synaptics RMI4 touchscreen interface on the U8500 UIB
+ */
+
+/*
+ * Descriptor structure.
+ * Describes the number of i2c devices on the bus that speak RMI.
+ */
+static struct synaptics_rmi4_platform_data rmi4_i2c_dev_platformdata = {
+	.irq_number     = NOMADIK_GPIO_TO_IRQ(84),
+	.irq_type       = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
+	.x_flip		= false,
+	.y_flip		= true,
+	.regulator_en   = false,
+};
+
+static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
+	{
+		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
+		.platform_data = &rmi4_i2c_dev_platformdata,
+	},
+};
+
+/*
+ * TC35893
+ */
+static const unsigned int u8500_keymap[] = {
+	KEY(3, 1, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(6, 4, KEY_VOLUMEDOWN),
+	KEY(4, 2, KEY_EMAIL),
+	KEY(3, 3, KEY_RIGHT),
+	KEY(2, 5, KEY_BACKSPACE),
+
+	KEY(6, 7, KEY_MENU),
+	KEY(5, 0, KEY_ENTER),
+	KEY(4, 3, KEY_0),
+	KEY(3, 4, KEY_DOT),
+	KEY(5, 2, KEY_UP),
+	KEY(3, 5, KEY_DOWN),
+
+	KEY(4, 5, KEY_SEND),
+	KEY(0, 5, KEY_BACK),
+	KEY(6, 2, KEY_VOLUMEUP),
+	KEY(1, 3, KEY_SPACE),
+	KEY(7, 6, KEY_LEFT),
+	KEY(5, 5, KEY_SEARCH),
+};
+
+static struct matrix_keymap_data u8500_keymap_data = {
+	.keymap		= u8500_keymap,
+	.keymap_size    = ARRAY_SIZE(u8500_keymap),
+};
+
+static struct tc3589x_keypad_platform_data tc35893_data = {
+	.krow = TC_KPD_ROWS,
+	.kcol = TC_KPD_COLUMNS,
+	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
+	.settle_time = TC_KPD_SETTLE_TIME,
+	.irqtype = IRQF_TRIGGER_FALLING,
+	.enable_wakeup = true,
+	.keymap_data    = &u8500_keymap_data,
+	.no_autorepeat  = true,
+};
+
+static struct tc3589x_platform_data tc3589x_keypad_data = {
+	.block = TC3589x_BLOCK_KEYPAD,
+	.keypad = &tc35893_data,
+	.irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
+	{
+		I2C_BOARD_INFO("tc3589x", 0x44),
+		.platform_data = &tc3589x_keypad_data,
+		.irq = NOMADIK_GPIO_TO_IRQ(218),
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
+
+void __init mop500_u8500uib_init(void)
+{
+	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
+			ARRAY_SIZE(mop500_i2c3_devices_u8500));
+
+	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
+			ARRAY_SIZE(mop500_i2c0_devices_u8500));
+
+}
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
new file mode 100644
index 000000000000..69cce41f602a
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#define pr_fmt(fmt)	"mop500-uib: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#include <mach/hardware.h>
+#include "board-mop500.h"
+
+enum mop500_uib {
+	STUIB,
+	U8500UIB,
+};
+
+struct uib {
+	const char *name;
+	const char *option;
+	void (*init)(void);
+};
+
+static struct __initdata uib mop500_uibs[] = {
+	[STUIB] = {
+		.name	= "ST-UIB",
+		.option	= "stuib",
+		.init	= mop500_stuib_init,
+	},
+	[U8500UIB] = {
+		.name	= "U8500-UIB",
+		.option	= "u8500uib",
+		.init	= mop500_u8500uib_init,
+	},
+};
+
+static struct uib *mop500_uib;
+
+static int __init mop500_uib_setup(char *str)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
+		struct uib *uib = &mop500_uibs[i];
+
+		if (!strcmp(str, uib->option)) {
+			mop500_uib = uib;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(mop500_uibs))
+		pr_err("invalid uib= option (%s)\n", str);
+
+	return 1;
+}
+__setup("uib=", mop500_uib_setup);
+
+/*
+ * The UIBs are detected after the I2C host controllers are registered, so
+ * i2c_register_board_info() can't be used.
+ */
+void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
+		unsigned n)
+{
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+	int i;
+
+	adap = i2c_get_adapter(busnum);
+	if (!adap) {
+		pr_err("failed to get adapter i2c%d\n", busnum);
+		return;
+	}
+
+	for (i = 0; i < n; i++) {
+		client = i2c_new_device(adap, &info[i]);
+		if (!client)
+			pr_err("failed to register %s to i2c%d\n",
+					info[i].type, busnum);
+	}
+
+	i2c_put_adapter(adap);
+}
+
+static void __init __mop500_uib_init(struct uib *uib, const char *why)
+{
+	pr_info("%s (%s)\n", uib->name, why);
+	uib->init();
+}
+
+/*
+ * Detect the UIB attached based on the presence or absence of i2c devices.
+ */
+static int __init mop500_uib_init(void)
+{
+	struct uib *uib = mop500_uib;
+	struct i2c_adapter *i2c0;
+	int ret;
+
+	if (!cpu_is_u8500())
+		return -ENODEV;
+
+	if (uib) {
+		__mop500_uib_init(uib, "from uib= boot argument");
+		return 0;
+	}
+
+	i2c0 = i2c_get_adapter(0);
+	if (!i2c0) {
+		__mop500_uib_init(&mop500_uibs[STUIB],
+				"fallback, could not get i2c0");
+		return -ENODEV;
+	}
+
+	/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
+	ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
+			I2C_SMBUS_QUICK, NULL);
+	i2c_put_adapter(i2c0);
+
+	if (ret == 0)
+		uib = &mop500_uibs[U8500UIB];
+	else
+		uib = &mop500_uibs[STUIB];
+
+	__mop500_uib_init(uib, "detected");
+
+	return 0;
+}
+
+module_init(mop500_uib_init);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a393f57ed2a8..8790d984cac8 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -17,68 +17,30 @@
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
+#include <linux/amba/serial.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/ab8500.h>
 #include <linux/mfd/tc3589x.h>
+#include <linux/leds-lp5521.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/pincfg.h>
 #include <plat/i2c.h>
+#include <plat/ste_dma40.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
+#include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
 
-static pin_cfg_t mop500_pins[] = {
-	/* SSP0 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD,
-	GPIO146_SSP0_TXD,
-
-	/* I2C */
-	GPIO147_I2C0_SCL,
-	GPIO148_I2C0_SDA,
-	GPIO16_I2C1_SCL,
-	GPIO17_I2C1_SDA,
-	GPIO10_I2C2_SDA,
-	GPIO11_I2C2_SCL,
-	GPIO229_I2C3_SDA,
-	GPIO230_I2C3_SCL,
-
-	/* SKE keypad */
-	GPIO153_KP_I7,
-	GPIO154_KP_I6,
-	GPIO155_KP_I5,
-	GPIO156_KP_I4,
-	GPIO157_KP_O7,
-	GPIO158_KP_O6,
-	GPIO159_KP_O5,
-	GPIO160_KP_O4,
-	GPIO161_KP_I3,
-	GPIO162_KP_I2,
-	GPIO163_KP_I1,
-	GPIO164_KP_I0,
-	GPIO165_KP_O3,
-	GPIO166_KP_O2,
-	GPIO167_KP_O1,
-	GPIO168_KP_O0,
-
-	/* GPIO_EXP_INT */
-	GPIO217_GPIO,
-
-	/* STMPE1601 IRQ */
-	GPIO218_GPIO    | PIN_INPUT_PULLUP,
-};
-
 static struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator	= ab8500_regulators,
@@ -103,16 +65,6 @@ struct platform_device ab8500_device = {
 	.resource = ab8500_resources,
 };
 
-static struct pl022_ssp_controller ssp0_platform_data = {
-	.bus_id = 0,
-	/* pl022 not yet supports dma */
-	.enable_dma = 0,
-	/* on this platform, gpio 31,142,144,214 &
-	 * 224 are connected as chip selects
-	 */
-	.num_chipselect = 5,
-};
-
 /*
  * TC35892
  */
@@ -133,14 +85,81 @@ static struct tc3589x_platform_data mop500_tc35892_data = {
 	.irq_base	= MOP500_EGPIO_IRQ_BASE,
 };
 
+static struct lp5521_led_config lp5521_pri_led[] = {
+       [0] = {
+	       .chan_nr = 0,
+	       .led_current = 0x2f,
+	       .max_current = 0x5f,
+       },
+       [1] = {
+	       .chan_nr = 1,
+	       .led_current = 0x2f,
+	       .max_current = 0x5f,
+       },
+       [2] = {
+	       .chan_nr = 2,
+	       .led_current = 0x2f,
+	       .max_current = 0x5f,
+       },
+};
+
+static struct lp5521_platform_data __initdata lp5521_pri_data = {
+       .label = "lp5521_pri",
+       .led_config     = &lp5521_pri_led[0],
+       .num_channels   = 3,
+       .clock_mode     = LP5521_CLOCK_EXT,
+};
+
+static struct lp5521_led_config lp5521_sec_led[] = {
+       [0] = {
+	       .chan_nr = 0,
+	       .led_current = 0x2f,
+	       .max_current = 0x5f,
+       },
+       [1] = {
+	       .chan_nr = 1,
+	       .led_current = 0x2f,
+	       .max_current = 0x5f,
+       },
+       [2] = {
+	       .chan_nr = 2,
+	       .led_current = 0x2f,
+	       .max_current = 0x5f,
+       },
+};
+
+static struct lp5521_platform_data __initdata lp5521_sec_data = {
+       .label = "lp5521_sec",
+       .led_config     = &lp5521_sec_led[0],
+       .num_channels   = 3,
+       .clock_mode     = LP5521_CLOCK_EXT,
+};
+
 static struct i2c_board_info mop500_i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq            = NOMADIK_GPIO_TO_IRQ(217),
+		.irq		= NOMADIK_GPIO_TO_IRQ(217),
 		.platform_data  = &mop500_tc35892_data,
 	},
 };
 
+static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
+	{
+		/* lp5521 LED driver, 1st device */
+		I2C_BOARD_INFO("lp5521", 0x33),
+		.platform_data = &lp5521_pri_data,
+	},
+	{
+		/* lp5521 LED driver, 2st device */
+		I2C_BOARD_INFO("lp5521", 0x34),
+		.platform_data = &lp5521_sec_data,
+	},
+	{
+		/* Light sensor Rohm BH1780GLI */
+		I2C_BOARD_INFO("bh1780", 0x29),
+	},
+};
+
 #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
 static struct nmk_i2c_controller u8500_i2c##id##_data = { \
 	/*				\
@@ -178,8 +197,93 @@ static void __init mop500_i2c_init(void)
 	db8500_add_i2c3(&u8500_i2c3_data);
 }
 
+static struct gpio_keys_button mop500_gpio_keys[] = {
+	{
+		.desc			= "SFH7741 Proximity Sensor",
+		.type			= EV_SW,
+		.code			= SW_FRONT_PROXIMITY,
+		.active_low		= 0,
+		.can_disable		= 1,
+	}
+};
+
+static struct regulator *prox_regulator;
+static int mop500_prox_activate(struct device *dev);
+static void mop500_prox_deactivate(struct device *dev);
+
+static struct gpio_keys_platform_data mop500_gpio_keys_data = {
+	.buttons	= mop500_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
+	.enable		= mop500_prox_activate,
+	.disable	= mop500_prox_deactivate,
+};
+
+static struct platform_device mop500_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= 0,
+	.dev	= {
+		.platform_data	= &mop500_gpio_keys_data,
+	},
+};
+
+static int mop500_prox_activate(struct device *dev)
+{
+	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
+						"vcc");
+	if (IS_ERR(prox_regulator)) {
+		dev_err(&mop500_gpio_keys_device.dev,
+			"no regulator\n");
+		return PTR_ERR(prox_regulator);
+	}
+	regulator_enable(prox_regulator);
+	return 0;
+}
+
+static void mop500_prox_deactivate(struct device *dev)
+{
+	regulator_disable(prox_regulator);
+	regulator_put(prox_regulator);
+}
+
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
+	&mop500_gpio_keys_device,
+};
+
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV8_SSP0_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+#endif
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+	.bus_id = 0,
+#ifdef CONFIG_STE_DMA40
+	.enable_dma = 1,
+	.dma_filter = stedma40_filter,
+	.dma_rx_param = &ssp0_dma_cfg_rx,
+	.dma_tx_param = &ssp0_dma_cfg_tx,
+#else
+	.enable_dma = 0,
+#endif
+	/* on this platform, gpio 31,142,144,214 &
+	 * 224 are connected as chip selects
+	 */
+	.num_chipselect = 5,
 };
 
 static void __init mop500_spi_init(void)
@@ -187,18 +291,108 @@ static void __init mop500_spi_init(void)
 	db8500_add_ssp0(&ssp0_platform_data);
 }
 
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV13_UART0_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV12_UART1_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV11_UART2_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+#endif
+
+static struct amba_pl011_data uart0_plat = {
+#ifdef CONFIG_STE_DMA40
+	.dma_filter = stedma40_filter,
+	.dma_rx_param = &uart0_dma_cfg_rx,
+	.dma_tx_param = &uart0_dma_cfg_tx,
+#endif
+};
+
+static struct amba_pl011_data uart1_plat = {
+#ifdef CONFIG_STE_DMA40
+	.dma_filter = stedma40_filter,
+	.dma_rx_param = &uart1_dma_cfg_rx,
+	.dma_tx_param = &uart1_dma_cfg_tx,
+#endif
+};
+
+static struct amba_pl011_data uart2_plat = {
+#ifdef CONFIG_STE_DMA40
+	.dma_filter = stedma40_filter,
+	.dma_rx_param = &uart2_dma_cfg_rx,
+	.dma_tx_param = &uart2_dma_cfg_tx,
+#endif
+};
+
 static void __init mop500_uart_init(void)
 {
-	db8500_add_uart0();
-	db8500_add_uart1();
-	db8500_add_uart2();
+	db8500_add_uart0(&uart0_plat);
+	db8500_add_uart1(&uart1_plat);
+	db8500_add_uart2(&uart2_plat);
 }
 
-static void __init u8500_init_machine(void)
+static void __init mop500_init_machine(void)
 {
+	/*
+	 * The HREFv60 board removed a GPIO expander and routed
+	 * all these GPIO pins to the internal GPIO controller
+	 * instead.
+	 */
+	if (machine_is_hrefv60())
+		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+	else
+		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+
 	u8500_init_devices();
 
-	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+	mop500_pins_init();
 
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
@@ -207,12 +401,12 @@ static void __init u8500_init_machine(void)
 	mop500_spi_init();
 	mop500_uart_init();
 
-	mop500_keypad_init();
-
 	platform_device_register(&ab8500_device);
 
 	i2c_register_board_info(0, mop500_i2c0_devices,
 				ARRAY_SIZE(mop500_i2c0_devices));
+	i2c_register_board_info(2, mop500_i2c2_devices,
+				ARRAY_SIZE(mop500_i2c2_devices));
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
@@ -222,5 +416,13 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.timer		= &ux500_timer,
-	.init_machine	= u8500_init_machine,
+	.init_machine	= mop500_init_machine,
+MACHINE_END
+
+MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
+	.boot_params	= 0x100,
+	.map_io		= u8500_map_io,
+	.init_irq	= ux500_init_irq,
+	.timer		= &ux500_timer,
+	.init_machine	= mop500_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 3104ae2a02c2..56722f4be71b 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,15 +7,36 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
-#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
+/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
+#define HREFV60_TOUCH_RST_GPIO		143
+#define HREFV60_PROX_SENSE_GPIO		217
+#define HREFV60_HAL_SW_GPIO		145
+#define HREFV60_SDMMC_EN_GPIO		169
+#define HREFV60_SDMMC_1V8_3V_GPIO	5
+#define HREFV60_SDMMC_CD_GPIO		95
+#define HREFV60_ACCEL_INT1_GPIO		82
+#define HREFV60_ACCEL_INT2_GPIO		83
+#define HREFV60_MAGNET_DRDY_GPIO	32
+#define HREFV60_DISP1_RST_GPIO		65
+#define HREFV60_DISP2_RST_GPIO		66
 
 /* GPIOs on the TC35892 expander */
+#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
 #define GPIO_SDMMC_CD			MOP500_EGPIO(3)
+#define GPIO_PROX_SENSOR		MOP500_EGPIO(7)
+#define GPIO_BU21013_CS			MOP500_EGPIO(13)
 #define GPIO_SDMMC_EN			MOP500_EGPIO(17)
 #define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)
 
+struct i2c_board_info;
+
 extern void mop500_sdi_init(void);
 extern void mop500_sdi_tc35892_init(void);
-extern void mop500_keypad_init(void);
+void __init mop500_u8500uib_init(void);
+void __init mop500_stuib_init(void);
+void __init mop500_pins_init(void);
+
+void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
+		unsigned n);
 
 #endif
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 54712acc0394..739fb4c5b160 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -31,6 +31,26 @@ static pin_cfg_t u5500_sdi_pins[] = {
 	GPIO14_MC0_CLK		| PIN_DIR_OUTPUT | PIN_VAL_LOW,
 };
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data u5500_sdi0_data = {
 	.ocr_mask	= MMC_VDD_165_195,
 	.f_max		= 50000000,
@@ -39,6 +59,11 @@ static struct mmci_platform_data u5500_sdi0_data = {
 				MMC_CAP_MMC_HIGHSPEED,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &u5500_sdi0_dma_cfg_rx,
+	.dma_tx_param	= &u5500_sdi0_dma_cfg_tx,
+#endif
 };
 
 void __init u5500_sdi_init(void)
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 39d370c1f3b4..44fd3b5c33ec 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -22,9 +22,9 @@
 
 static void __init u5500_uart_init(void)
 {
-	db5500_add_uart0();
-	db5500_add_uart1();
-	db5500_add_uart2();
+	db5500_add_uart0(NULL);
+	db5500_add_uart1(NULL);
+	db5500_add_uart2(NULL);
 }
 
 static void __init u5500_init_machine(void)
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index b2b0a3b9be8f..32ce90840ee1 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -313,7 +313,7 @@ static DEFINE_PRCMU_CLK_RATE(uartclk,	0x0, 5, UARTCLK, 38400000);
 static DEFINE_PRCMU_CLK(msp02clk,	0x0, 6, MSP02CLK);
 static DEFINE_PRCMU_CLK(msp1clk,	0x0, 7, MSP1CLK); /* v1 */
 static DEFINE_PRCMU_CLK_RATE(i2cclk,	0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 50000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 100000000);
 static DEFINE_PRCMU_CLK(slimclk,	0x0, 10, SLIMCLK);
 static DEFINE_PRCMU_CLK(per1clk,	0x0, 11, PER1CLK);
 static DEFINE_PRCMU_CLK(per2clk,	0x0, 12, PER2CLK);
@@ -520,7 +520,7 @@ static struct clk_lookup u8500_ed_clks[] = {
 	CLK(ssp0_ed,	"ssp0",		NULL),
 
 	/* Peripheral Cluster #5 */
-	CLK(usb_ed,	"musb_hdrc.0",	"usb"),
+	CLK(usb_ed,	"musb-ux500.0",	"usb"),
 
 	/* Peripheral Cluster #6 */
 	CLK(dmc_ed,	"dmc",		NULL),
@@ -561,7 +561,7 @@ static struct clk_lookup u8500_v1_clks[] = {
 	CLK(ssp0_v1,	"ssp0",		NULL),
 
 	/* Peripheral Cluster #5 */
-	CLK(usb_v1,	"musb_hdrc.0",	"usb"),
+	CLK(usb_v1,	"musb-ux500.0",	"usb"),
 
 	/* Peripheral Cluster #6 */
 	CLK(mtu1_v1,	"mtu1",		NULL),
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index af04e0891a78..c9dc2eff3cb2 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 
 #include <plat/gpio.h>
 
@@ -18,8 +19,10 @@
 #include <mach/devices.h>
 #include <mach/setup.h>
 #include <mach/irqs.h>
+#include <mach/usb.h>
 
 #include "devices-db5500.h"
+#include "ste-dma40-db5500.h"
 
 static struct map_desc u5500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
@@ -43,6 +46,26 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
+static struct resource db5500_pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_DB5500_PMU0,
+		.end		= IRQ_DB5500_PMU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_DB5500_PMU1,
+		.end		= IRQ_DB5500_PMU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db5500_pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(db5500_pmu_resources),
+	.resource		= db5500_pmu_resources,
+};
+
 static struct resource mbox0_resources[] = {
 	{
 		.name = "mbox_peer",
@@ -127,7 +150,8 @@ static struct platform_device mbox2_device = {
 	.num_resources = ARRAY_SIZE(mbox2_resources),
 };
 
-static struct platform_device *u5500_platform_devs[] __initdata = {
+static struct platform_device *db5500_platform_devs[] __initdata = {
+	&db5500_pmu_device,
 	&mbox0_device,
 	&mbox1_device,
 	&mbox2_device,
@@ -166,12 +190,35 @@ void __init u5500_map_io(void)
 	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
 }
 
+static int usb_db5500_rx_dma_cfg[] = {
+	DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
+	DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
+	DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
+	DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
+	DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
+	DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
+	DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
+	DB5500_DMA_DEV38_USB_OTG_IEP_8
+};
+
+static int usb_db5500_tx_dma_cfg[] = {
+	DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
+	DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
+	DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
+	DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
+	DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
+	DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
+	DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
+	DB5500_DMA_DEV38_USB_OTG_OEP_8
+};
+
 void __init u5500_init_devices(void)
 {
 	db5500_add_gpios();
 	db5500_dma_init();
 	db5500_add_rtc();
+	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
-	platform_add_devices(u5500_platform_devs,
-			     ARRAY_SIZE(u5500_platform_devs));
+	platform_add_devices(db5500_platform_devs,
+			     ARRAY_SIZE(db5500_platform_devs));
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 1748fbc58530..516126cb357d 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -12,21 +12,21 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
+#include <mach/usb.h>
 
 #include "devices-db8500.h"
-
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-};
+#include "ste-dma40-db8500.h"
 
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -89,6 +89,51 @@ void __init u8500_map_io(void)
 		iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
 }
 
+static struct resource db8500_pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_DB8500_PMU,
+		.end		= IRQ_DB8500_PMU,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * The PMU IRQ lines of two cores are wired together into a single interrupt.
+ * Bounce the interrupt to the other core if it's not ours.
+ */
+static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
+{
+	irqreturn_t ret = handler(irq, dev);
+	int other = !smp_processor_id();
+
+	if (ret == IRQ_NONE && cpu_online(other))
+		irq_set_affinity(irq, cpumask_of(other));
+
+	/*
+	 * We should be able to get away with the amount of IRQ_NONEs we give,
+	 * while still having the spurious IRQ detection code kick in if the
+	 * interrupt really starts hitting spuriously.
+	 */
+	return ret;
+}
+
+static struct arm_pmu_platdata db8500_pmu_platdata = {
+	.handle_irq		= db8500_pmu_handler,
+};
+
+static struct platform_device db8500_pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
+	.resource		= db8500_pmu_resources,
+	.dev.platform_data	= &db8500_pmu_platdata,
+};
+
+static struct platform_device *platform_devs[] __initdata = {
+	&u8500_dma40_device,
+	&db8500_pmu_device,
+};
+
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
@@ -111,6 +156,28 @@ static void __init db8500_add_gpios(void)
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
+static int usb_db8500_rx_dma_cfg[] = {
+	DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
+	DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
+	DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
+	DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
+	DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
+	DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
+	DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
+	DB8500_DMA_DEV39_USB_OTG_IEP_8
+};
+
+static int usb_db8500_tx_dma_cfg[] = {
+	DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
+	DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
+	DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
+	DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
+	DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
+	DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
+	DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
+	DB8500_DMA_DEV39_USB_OTG_OEP_8
+};
+
 /*
  * This function is called from the board init
  */
@@ -121,6 +188,7 @@ void __init u8500_init_devices(void)
 
 	db8500_add_rtc();
 	db8500_add_gpios();
+	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index fe69f5fac1bb..13a4ce046ae5 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -139,6 +139,7 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 	for (i = 0; i < num; i++, first += 32, irq++) {
 		pdata->first_gpio = first;
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+		pdata->num_gpio = 32;
 
 		dbx500_add_gpio(i, base[i], irq, pdata);
 	}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index cbadc117d2db..c719b5a1d913 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -42,10 +42,13 @@ dbx500_add_sdi(const char *name, resource_size_t base, int irq,
 	return dbx500_add_amba_device(name, base, irq, pdata, 0);
 }
 
+struct amba_pl011_data;
+
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq)
+dbx500_add_uart(const char *name, resource_size_t base, int irq,
+		struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, NULL, 0);
+	return dbx500_add_amba_device(name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index c8d7901c1f2d..94627f7783b0 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -34,6 +34,9 @@
 #define db5500_add_rtc() \
 	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
 
+#define db5500_add_usb(rx_cfg, tx_cfg) \
+	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+
 #define db5500_add_sdi0(pdata) \
 	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata)
 #define db5500_add_sdi1(pdata) \
@@ -54,13 +57,13 @@
 #define db5500_add_spi3(pdata) \
 	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata)
 
-#define db5500_add_uart0() \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0)
-#define db5500_add_uart1() \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1)
-#define db5500_add_uart2() \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2)
-#define db5500_add_uart3() \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3)
+#define db5500_add_uart0(plat) \
+	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(plat) \
+	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(plat) \
+	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(plat) \
+	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 23c695d54977..73b17404b194 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
 
 #include <plat/ste_dma40.h>
 
@@ -67,12 +68,72 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = {
 
 /*
  * Mapping between destination event lines and physical device address.
- * The event line is tied to a device and therefor the address is constant.
+ * The event line is tied to a device and therefore the address is constant.
+ * When the address comes from a primecell it will be configured in runtime
+ * and we set the address to -1 as a placeholder.
  */
-static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV];
+static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
+	/* MUSB - these will be runtime-reconfigured */
+	[DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
+	[DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
+	[DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
+	[DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
+	[DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
+	[DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
+	[DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
+	[DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
+	/* PrimeCells - run-time configured */
+	[DB8500_DMA_DEV0_SPI0_TX] = -1,
+	[DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
+	[DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
+	[DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
+	[DB8500_DMA_DEV8_SSP0_TX] = -1,
+	[DB8500_DMA_DEV9_SSP1_TX] = -1,
+	[DB8500_DMA_DEV11_UART2_TX] = -1,
+	[DB8500_DMA_DEV12_UART1_TX] = -1,
+	[DB8500_DMA_DEV13_UART0_TX] = -1,
+	[DB8500_DMA_DEV28_SD_MM2_TX] = -1,
+	[DB8500_DMA_DEV29_SD_MM0_TX] = -1,
+	[DB8500_DMA_DEV32_SD_MM1_TX] = -1,
+	[DB8500_DMA_DEV33_SPI2_TX] = -1,
+	[DB8500_DMA_DEV35_SPI1_TX] = -1,
+	[DB8500_DMA_DEV40_SPI3_TX] = -1,
+	[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
+	[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
+	[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
+};
 
 /* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV];
+static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
+	/* MUSB - these will be runtime-reconfigured */
+	[DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
+	[DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
+	[DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
+	[DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
+	[DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
+	[DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
+	[DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
+	[DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
+	/* PrimeCells */
+	[DB8500_DMA_DEV0_SPI0_RX] = -1,
+	[DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
+	[DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
+	[DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
+	[DB8500_DMA_DEV8_SSP0_RX] = -1,
+	[DB8500_DMA_DEV9_SSP1_RX] = -1,
+	[DB8500_DMA_DEV11_UART2_RX] = -1,
+	[DB8500_DMA_DEV12_UART1_RX] = -1,
+	[DB8500_DMA_DEV13_UART0_RX] = -1,
+	[DB8500_DMA_DEV28_SD_MM2_RX] = -1,
+	[DB8500_DMA_DEV29_SD_MM0_RX] = -1,
+	[DB8500_DMA_DEV32_SD_MM1_RX] = -1,
+	[DB8500_DMA_DEV33_SPI2_RX] = -1,
+	[DB8500_DMA_DEV35_SPI1_RX] = -1,
+	[DB8500_DMA_DEV40_SPI3_RX] = -1,
+	[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
+	[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
+	[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
+};
 
 /* Reserved event lines for memcpy only */
 static int dma40_memcpy_event[] = {
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3a770c756979..9cc6f8f5d3e6 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -61,6 +61,9 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq,
 #define db8500_add_rtc() \
 	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
 
+#define db8500_add_usb(rx_cfg, tx_cfg) \
+	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
 #define db8500_add_sdi0(pdata) \
 	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata)
 #define db8500_add_sdi1(pdata) \
@@ -88,11 +91,11 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq,
 #define db8500_add_spi3(pdata) \
 	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata)
 
-#define db8500_add_uart0() \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0)
-#define db8500_add_uart1() \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1)
-#define db8500_add_uart2() \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2)
+#define db8500_add_uart0(pdata) \
+	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(pdata) \
+	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(pdata) \
+	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 32a061f8a95b..1cfab68ae417 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -73,11 +73,27 @@ static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
  */
 static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
 	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
+	[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
+	[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
+	[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
+	[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
+	[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
+	[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
+	[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
+	[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
 };
 
 /* Mapping between destination event lines and physical device address */
 static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
 	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
+	[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
+	[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
+	[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
+	[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
+	[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
+	[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
+	[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
+	[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
 };
 
 static int dma40_memcpy_event[] = {
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 9a6614c6808e..ab0fe1432fae 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -50,7 +50,11 @@ static void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	if (machine_is_u8500())
+	/* Check in run time if we run on an U8500 or U5500 */
+	if (machine_is_u8500() ||
+	    machine_is_svp8500v1() ||
+	    machine_is_svp8500v2() ||
+	    machine_is_hrefv60())
 		ux500_uart_base = U8500_UART2_BASE;
 	else if (machine_is_u5500())
 		ux500_uart_base = U5500_UART0_BASE;
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
new file mode 100644
index 000000000000..d3739d418813
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+#include <linux/dmaengine.h>
+
+#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+
+struct ux500_musb_board_data {
+	void	**dma_rx_param_array;
+	void	**dma_tx_param_array;
+	u32	num_rx_channels;
+	u32	num_tx_channels;
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
+	int *dma_tx_cfg);
+#endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
new file mode 100644
index 000000000000..82e535953fd9
--- /dev/null
+++ b/arch/arm/mach-ux500/usb.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+#include <plat/ste_dma40.h>
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#define MUSB_DMA40_RX_CH { \
+		.mode = STEDMA40_MODE_LOGICAL, \
+		.dir = STEDMA40_PERIPH_TO_MEM, \
+		.dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
+		.src_info.data_width = STEDMA40_WORD_WIDTH, \
+		.dst_info.data_width = STEDMA40_WORD_WIDTH, \
+		.src_info.psize = STEDMA40_PSIZE_LOG_16, \
+		.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+	}
+
+#define MUSB_DMA40_TX_CH { \
+		.mode = STEDMA40_MODE_LOGICAL, \
+		.dir = STEDMA40_MEM_TO_PERIPH, \
+		.src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
+		.src_info.data_width = STEDMA40_WORD_WIDTH, \
+		.dst_info.data_width = STEDMA40_WORD_WIDTH, \
+		.src_info.psize = STEDMA40_PSIZE_LOG_16, \
+		.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+	}
+
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+	= {
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH,
+	MUSB_DMA40_RX_CH
+};
+
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+	= {
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+	MUSB_DMA40_TX_CH,
+};
+
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+	&musb_dma_rx_ch[0],
+	&musb_dma_rx_ch[1],
+	&musb_dma_rx_ch[2],
+	&musb_dma_rx_ch[3],
+	&musb_dma_rx_ch[4],
+	&musb_dma_rx_ch[5],
+	&musb_dma_rx_ch[6],
+	&musb_dma_rx_ch[7]
+};
+
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+	&musb_dma_tx_ch[0],
+	&musb_dma_tx_ch[1],
+	&musb_dma_tx_ch[2],
+	&musb_dma_tx_ch[3],
+	&musb_dma_tx_ch[4],
+	&musb_dma_tx_ch[5],
+	&musb_dma_tx_ch[6],
+	&musb_dma_tx_ch[7]
+};
+
+static struct ux500_musb_board_data musb_board_data = {
+	.dma_rx_param_array = ux500_dma_rx_param_array,
+	.dma_tx_param_array = ux500_dma_tx_param_array,
+	.num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
+	.num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
+	.dma_filter = stedma40_filter,
+};
+
+static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
+
+static struct musb_hdrc_config musb_hdrc_config = {
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.num_eps	= 16,
+	.ram_bits	= 16,
+};
+
+static struct musb_hdrc_platform_data musb_platform_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+	.mode = MUSB_PERIPHERAL,
+#else /* defined(CONFIG_USB_MUSB_HOST) */
+	.mode = MUSB_HOST,
+#endif
+	.config = &musb_hdrc_config,
+	.board_data = &musb_board_data,
+};
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.name	= "usb-mem",
+		.flags	=  IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.name   = "mc", /* hard-coded in musb */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device ux500_musb_device = {
+	.name = "musb-ux500",
+	.id = 0,
+	.dev = {
+		.platform_data = &musb_platform_data,
+		.dma_mask = &ux500_musb_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(usb_resources),
+	.resource = usb_resources,
+};
+
+static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
+{
+	u32 idx;
+
+	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
+		musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
+}
+
+static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
+{
+	u32 idx;
+
+	for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
+		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
+}
+
+void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
+	int *dma_tx_cfg)
+{
+	ux500_musb_device.resource[0].start = base;
+	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
+	ux500_musb_device.resource[1].start = irq;
+	ux500_musb_device.resource[1].end = irq;
+
+	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
+	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
+
+	platform_device_register(&ux500_musb_device);
+}