Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...

1 files changed, 0 insertions, 182 deletions

diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
deleted file mode 100644
index aad1a2c1d714..000000000000
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/irqs.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IRQS_H
-#define __MACH_TEGRA_IRQS_H
-
-#define INT_GIC_BASE			0
-
-#define IRQ_LOCALTIMER                  29
-
-/* Primary Interrupt Controller */
-#define INT_PRI_BASE			(INT_GIC_BASE + 32)
-#define INT_TMR1			(INT_PRI_BASE + 0)
-#define INT_TMR2			(INT_PRI_BASE + 1)
-#define INT_RTC				(INT_PRI_BASE + 2)
-#define INT_I2S2			(INT_PRI_BASE + 3)
-#define INT_SHR_SEM_INBOX_IBF		(INT_PRI_BASE + 4)
-#define INT_SHR_SEM_INBOX_IBE		(INT_PRI_BASE + 5)
-#define INT_SHR_SEM_OUTBOX_IBF		(INT_PRI_BASE + 6)
-#define INT_SHR_SEM_OUTBOX_IBE		(INT_PRI_BASE + 7)
-#define INT_VDE_UCQ_ERROR		(INT_PRI_BASE + 8)
-#define INT_VDE_SYNC_TOKEN		(INT_PRI_BASE + 9)
-#define INT_VDE_BSE_V			(INT_PRI_BASE + 10)
-#define INT_VDE_BSE_A			(INT_PRI_BASE + 11)
-#define INT_VDE_SXE			(INT_PRI_BASE + 12)
-#define INT_I2S1			(INT_PRI_BASE + 13)
-#define INT_SDMMC1			(INT_PRI_BASE + 14)
-#define INT_SDMMC2			(INT_PRI_BASE + 15)
-#define INT_XIO				(INT_PRI_BASE + 16)
-#define INT_VDE				(INT_PRI_BASE + 17)
-#define INT_AVP_UCQ			(INT_PRI_BASE + 18)
-#define INT_SDMMC3			(INT_PRI_BASE + 19)
-#define INT_USB				(INT_PRI_BASE + 20)
-#define INT_USB2			(INT_PRI_BASE + 21)
-#define INT_PRI_RES_22			(INT_PRI_BASE + 22)
-#define INT_EIDE			(INT_PRI_BASE + 23)
-#define INT_NANDFLASH			(INT_PRI_BASE + 24)
-#define INT_VCP				(INT_PRI_BASE + 25)
-#define INT_APB_DMA			(INT_PRI_BASE + 26)
-#define INT_AHB_DMA			(INT_PRI_BASE + 27)
-#define INT_GNT_0			(INT_PRI_BASE + 28)
-#define INT_GNT_1			(INT_PRI_BASE + 29)
-#define INT_OWR				(INT_PRI_BASE + 30)
-#define INT_SDMMC4			(INT_PRI_BASE + 31)
-
-/* Secondary Interrupt Controller */
-#define INT_SEC_BASE			(INT_PRI_BASE + 32)
-#define INT_GPIO1			(INT_SEC_BASE + 0)
-#define INT_GPIO2			(INT_SEC_BASE + 1)
-#define INT_GPIO3			(INT_SEC_BASE + 2)
-#define INT_GPIO4			(INT_SEC_BASE + 3)
-#define INT_UARTA			(INT_SEC_BASE + 4)
-#define INT_UARTB			(INT_SEC_BASE + 5)
-#define INT_I2C				(INT_SEC_BASE + 6)
-#define INT_SPI				(INT_SEC_BASE + 7)
-#define INT_TWC				(INT_SEC_BASE + 8)
-#define INT_TMR3			(INT_SEC_BASE + 9)
-#define INT_TMR4			(INT_SEC_BASE + 10)
-#define INT_FLOW_RSM0			(INT_SEC_BASE + 11)
-#define INT_FLOW_RSM1			(INT_SEC_BASE + 12)
-#define INT_SPDIF			(INT_SEC_BASE + 13)
-#define INT_UARTC			(INT_SEC_BASE + 14)
-#define INT_MIPI			(INT_SEC_BASE + 15)
-#define INT_EVENTA			(INT_SEC_BASE + 16)
-#define INT_EVENTB			(INT_SEC_BASE + 17)
-#define INT_EVENTC			(INT_SEC_BASE + 18)
-#define INT_EVENTD			(INT_SEC_BASE + 19)
-#define INT_VFIR			(INT_SEC_BASE + 20)
-#define INT_DVC				(INT_SEC_BASE + 21)
-#define INT_SYS_STATS_MON		(INT_SEC_BASE + 22)
-#define INT_GPIO5			(INT_SEC_BASE + 23)
-#define INT_CPU0_PMU_INTR		(INT_SEC_BASE + 24)
-#define INT_CPU1_PMU_INTR		(INT_SEC_BASE + 25)
-#define INT_SEC_RES_26			(INT_SEC_BASE + 26)
-#define INT_S_LINK1			(INT_SEC_BASE + 27)
-#define INT_APB_DMA_COP			(INT_SEC_BASE + 28)
-#define INT_AHB_DMA_COP			(INT_SEC_BASE + 29)
-#define INT_DMA_TX			(INT_SEC_BASE + 30)
-#define INT_DMA_RX			(INT_SEC_BASE + 31)
-
-/* Tertiary Interrupt Controller */
-#define INT_TRI_BASE			(INT_SEC_BASE + 32)
-#define INT_HOST1X_COP_SYNCPT		(INT_TRI_BASE + 0)
-#define INT_HOST1X_MPCORE_SYNCPT	(INT_TRI_BASE + 1)
-#define INT_HOST1X_COP_GENERAL		(INT_TRI_BASE + 2)
-#define INT_HOST1X_MPCORE_GENERAL	(INT_TRI_BASE + 3)
-#define INT_MPE_GENERAL			(INT_TRI_BASE + 4)
-#define INT_VI_GENERAL			(INT_TRI_BASE + 5)
-#define INT_EPP_GENERAL			(INT_TRI_BASE + 6)
-#define INT_ISP_GENERAL			(INT_TRI_BASE + 7)
-#define INT_2D_GENERAL			(INT_TRI_BASE + 8)
-#define INT_DISPLAY_GENERAL		(INT_TRI_BASE + 9)
-#define INT_DISPLAY_B_GENERAL		(INT_TRI_BASE + 10)
-#define INT_HDMI			(INT_TRI_BASE + 11)
-#define INT_TVO_GENERAL			(INT_TRI_BASE + 12)
-#define INT_MC_GENERAL			(INT_TRI_BASE + 13)
-#define INT_EMC_GENERAL			(INT_TRI_BASE + 14)
-#define INT_TRI_RES_15			(INT_TRI_BASE + 15)
-#define INT_TRI_RES_16			(INT_TRI_BASE + 16)
-#define INT_AC97			(INT_TRI_BASE + 17)
-#define INT_SPI_2			(INT_TRI_BASE + 18)
-#define INT_SPI_3			(INT_TRI_BASE + 19)
-#define INT_I2C2			(INT_TRI_BASE + 20)
-#define INT_KBC				(INT_TRI_BASE + 21)
-#define INT_EXTERNAL_PMU		(INT_TRI_BASE + 22)
-#define INT_GPIO6			(INT_TRI_BASE + 23)
-#define INT_TVDAC			(INT_TRI_BASE + 24)
-#define INT_GPIO7			(INT_TRI_BASE + 25)
-#define INT_UARTD			(INT_TRI_BASE + 26)
-#define INT_UARTE			(INT_TRI_BASE + 27)
-#define INT_I2C3			(INT_TRI_BASE + 28)
-#define INT_SPI_4			(INT_TRI_BASE + 29)
-#define INT_TRI_RES_30			(INT_TRI_BASE + 30)
-#define INT_SW_RESERVED			(INT_TRI_BASE + 31)
-
-/* Quaternary Interrupt Controller */
-#define INT_QUAD_BASE			(INT_TRI_BASE + 32)
-#define INT_SNOR			(INT_QUAD_BASE + 0)
-#define INT_USB3			(INT_QUAD_BASE + 1)
-#define INT_PCIE_INTR			(INT_QUAD_BASE + 2)
-#define INT_PCIE_MSI			(INT_QUAD_BASE + 3)
-#define INT_QUAD_RES_4			(INT_QUAD_BASE + 4)
-#define INT_QUAD_RES_5			(INT_QUAD_BASE + 5)
-#define INT_QUAD_RES_6			(INT_QUAD_BASE + 6)
-#define INT_QUAD_RES_7			(INT_QUAD_BASE + 7)
-#define INT_APB_DMA_CH0			(INT_QUAD_BASE + 8)
-#define INT_APB_DMA_CH1			(INT_QUAD_BASE + 9)
-#define INT_APB_DMA_CH2			(INT_QUAD_BASE + 10)
-#define INT_APB_DMA_CH3			(INT_QUAD_BASE + 11)
-#define INT_APB_DMA_CH4			(INT_QUAD_BASE + 12)
-#define INT_APB_DMA_CH5			(INT_QUAD_BASE + 13)
-#define INT_APB_DMA_CH6			(INT_QUAD_BASE + 14)
-#define INT_APB_DMA_CH7			(INT_QUAD_BASE + 15)
-#define INT_APB_DMA_CH8			(INT_QUAD_BASE + 16)
-#define INT_APB_DMA_CH9			(INT_QUAD_BASE + 17)
-#define INT_APB_DMA_CH10		(INT_QUAD_BASE + 18)
-#define INT_APB_DMA_CH11		(INT_QUAD_BASE + 19)
-#define INT_APB_DMA_CH12		(INT_QUAD_BASE + 20)
-#define INT_APB_DMA_CH13		(INT_QUAD_BASE + 21)
-#define INT_APB_DMA_CH14		(INT_QUAD_BASE + 22)
-#define INT_APB_DMA_CH15		(INT_QUAD_BASE + 23)
-#define INT_QUAD_RES_24			(INT_QUAD_BASE + 24)
-#define INT_QUAD_RES_25			(INT_QUAD_BASE + 25)
-#define INT_QUAD_RES_26			(INT_QUAD_BASE + 26)
-#define INT_QUAD_RES_27			(INT_QUAD_BASE + 27)
-#define INT_QUAD_RES_28			(INT_QUAD_BASE + 28)
-#define INT_QUAD_RES_29			(INT_QUAD_BASE + 29)
-#define INT_QUAD_RES_30			(INT_QUAD_BASE + 30)
-#define INT_QUAD_RES_31			(INT_QUAD_BASE + 31)
-
-/* Tegra30 has 5 banks of 32 IRQs */
-#define INT_MAIN_NR			(32 * 5)
-#define INT_GPIO_BASE			(INT_PRI_BASE + INT_MAIN_NR)
-
-/* Tegra30 has 8 banks of 32 GPIOs */
-#define INT_GPIO_NR			(32 * 8)
-
-#define TEGRA_NR_IRQS			(INT_GPIO_BASE + INT_GPIO_NR)
-
-#define INT_BOARD_BASE			TEGRA_NR_IRQS
-#define NR_BOARD_IRQS			32
-
-#define NR_IRQS				(INT_BOARD_BASE + NR_BOARD_IRQS)
-
-#endif