ARM: spear: move all files to mach-spear

There are no conflicting files between the three mach-spear* directories
and plat-spear any more, so we can now move all file to a common
mach-spear directory.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

1 files changed, 0 insertions, 115 deletions

diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
deleted file mode 100644
index d7580f2e5e07..000000000000
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear3xx.c
- *
- * SPEAr3XX machines common source file
- *
- * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define pr_fmt(fmt) "SPEAr3xx: " fmt
-
-#include <linux/amba/pl022.h>
-#include <linux/amba/pl080.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <asm/mach/map.h>
-#include <plat/pl080.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
-
-/* ssp device registration */
-struct pl022_ssp_controller pl022_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 1,
-	.dma_filter = pl08x_filter_id,
-	.dma_tx_param = "ssp0_tx",
-	.dma_rx_param = "ssp0_rx",
-	/*
-	 * This is number of spi devices that can be connected to spi. There are
-	 * two type of chipselects on which slave devices can work. One is chip
-	 * select provided by spi masters other is controlled through external
-	 * gpio's. We can't use chipselect provided from spi master (because as
-	 * soon as FIFO becomes empty, CS is disabled and transfer ends). So
-	 * this number now depends on number of gpios available for spi. each
-	 * slave on each master requires a separate gpio pin.
-	 */
-	.num_chipselect = 2,
-};
-
-/* dmac device registration */
-struct pl08x_platform_data pl080_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
-			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
-			PL080_CONTROL_PROT_SYS),
-	},
-	.lli_buses = PL08X_AHB1,
-	.mem_buses = PL08X_AHB1,
-	.get_signal = pl080_get_signal,
-	.put_signal = pl080_put_signal,
-};
-
-/*
- * Following will create 16MB static virtual/physical mappings
- * PHYSICAL		VIRTUAL
- * 0xD0000000		0xFD000000
- * 0xFC000000		0xFC000000
- */
-struct map_desc spear3xx_io_desc[] __initdata = {
-	{
-		.virtual	= VA_SPEAR_ICM1_2_BASE,
-		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR_ICM3_SMI_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	},
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear3xx_map_io(void)
-{
-	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-}
-
-void __init spear3xx_timer_init(void)
-{
-	char pclk_name[] = "pll3_clk";
-	struct clk *gpt_clk, *pclk;
-
-	spear3xx_clk_init();
-
-	/* get the system timer clock */
-	gpt_clk = clk_get_sys("gpt0", NULL);
-	if (IS_ERR(gpt_clk)) {
-		pr_err("%s:couldn't get clk for gpt\n", __func__);
-		BUG();
-	}
-
-	/* get the suitable parent clock for timer*/
-	pclk = clk_get(NULL, pclk_name);
-	if (IS_ERR(pclk)) {
-		pr_err("%s:couldn't get %s as parent for gpt\n",
-				__func__, pclk_name);
-		BUG();
-	}
-
-	clk_set_parent(gpt_clk, pclk);
-	clk_put(gpt_clk);
-	clk_put(pclk);
-
-	spear_setup_of_timer();
-}