ARM: S5PV210: Add Power Management Support

This patch adds suspend-to-ram support for S5PV210.
Note. This patch is confirmed on SMDKV210 and SMDKC110 board.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
new file mode 100644
index 000000000000..d4d222b716b4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -0,0 +1,170 @@
+/* linux/arch/arm/plat-s5p/sleep.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 power Manager (Suspend-To-RAM) support
+ * Based on S3C2410 sleep code by:
+ * 	Ben Dooks, (c) 2004 Simtec Electronics
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * entry:
+	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
+	*/
+
+ENTRY(s3c_cpu_save)
+
+	stmfd	sp!, { r3 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mrc	p15, 0, r12, c10, c2, 0	@ Read PRRR
+	mrc	p15, 0, r3, c10, c2, 1	@ READ NMRR
+
+	stmia	r0, { r3 - r13 }
+
+	bl	s3c_pm_cb_flushcache
+
+	ldr	r0, =pm_cpu_sleep
+	ldr	r0, [ r0 ]
+	mov	pc, r0
+
+resume_with_mmu:
+	/*
+	 * After MMU is turned on, restore the previous MMU table.
+	 */
+	ldr	r9 , =(PAGE_OFFSET - PHYS_OFFSET)
+	add	r4, r4, r9
+	str	r12, [r4]
+
+	ldmfd	sp!, { r3 - r12, pc }
+
+	.ltorg
+
+	.data
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	*/
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 *
+	 * we must put this code here in the data segment as we have no
+	 * other way of restoring the stack pointer after sleep, and we
+	 * must not write to the code segment (code is read-only)
+	*/
+
+ENTRY(s3c_cpu_resume)
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	msr	cpsr_c, r0
+
+	mov	r1, #0
+	mcr	p15, 0, r1, c8, c7, 0		@ invalidate TLBs
+	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I Cache
+
+	ldr	r0, s3c_sleep_save_phys		@ address of restore block
+	ldmia	r0, { r3 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0		@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
+
+	mcr	p15, 0, r8, c2, c0, 2		@ Translation Table Control
+	mcr	p15, 0, r7, c2, c0, 1		@ Translation Table BASE1
+	mcr	p15, 0, r6, c2, c0, 0		@ Translation Table BASE0
+
+	mcr	p15, 0, r10, c1, c0, 1		@ Auxiliary control register
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c8, c7, 0		@ Invalidate I & D TLB
+
+	mov	r0, #0				@ restore copro access
+	mcr	p15, 0, r11, c1, c0, 2		@ Co-processor access
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	mcr	p15, 0, r12, c10, c2, 0		@ write PRRR
+	mcr	p15, 0, r3, c10, c2, 1		@ write NMRR
+
+	/*
+	 * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
+	 * And there are no valid entries in the MMU table at this point.
+	 * So before turning on the MMU, the MMU entry for the DRAM address
+	 * range is added. After the MMU is turned on, the other entries
+	 * in the MMU table will be restored.
+	*/
+
+	/* r6 = Translation Table BASE0 */
+	mov	r4, r6
+	mov	r4, r4, LSR #14
+	mov	r4, r4, LSL #14
+
+	/* Load address for adding to MMU table list */
+	ldr	r11, =0xE010F000		@ INFORM0 reg.
+	ldr	r10, [r11, #0]
+	mov	r10, r10, LSR #18
+	bic	r10, r10, #0x3
+	orr	r4, r4, r10
+
+	/* Calculate MMU table entry */
+	mov 	r10, r10, LSL #18
+	ldr	r5, =0x40E
+	orr	r10, r10, r5
+
+	/* Back up originally data */
+	ldr	r12, [r4]
+
+	/* Add calculated MMU table entry into MMU table list */
+	str	r10, [r4]
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+
+	nop
+	nop
+	nop
+	nop
+	nop					@ second-to-last before mmu
+
+	mov	pc, r2				@ go back to virtual address
+
+	.ltorg