ARM: S3C64XX: Move device and device setup into mach-s3c64xx

Move the S3C64XX specific device and setup files into mach-s3c64xx as
they are unlikely to be used outside of this code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

12 files changed, 905 insertions, 1 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index ce32e4997d76..15e065ef19a5 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -26,6 +26,32 @@ config S3C64XX_SETUP_SDHCI
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
 
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 # S36400 Macchine support
 
 config MACH_SMDK6400
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 103bed48b46e..49b71d5f2e59 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -18,9 +18,13 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 obj-y				+= irq.o
 obj-y				+= irq-eint.o
 
-# setup support
+# Device setup
 
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
 
 # PM
 
@@ -33,3 +37,10 @@ obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
 obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-rtc.o
+obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
+obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
diff --git a/arch/arm/mach-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
new file mode 100644
index 000000000000..fafef9b6bcfa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-adc.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_ADC,
+		.end   = S3C64XX_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "s3c64xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
new file mode 100644
index 000000000000..aaffb8066707
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
+
+#include <plat/devs.h>
+#include <plat/audio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
+static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+	default:
+		printk(KERN_DEBUG "Invalid I2S Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+
+	return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_OUT,
+		.end   = DMACH_I2S0_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_IN,
+		.end   = DMACH_I2S0_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s0_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_OUT,
+		.end   = DMACH_I2S1_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_IN,
+		.end   = DMACH_I2S1_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_HSI_I2SV40_TX,
+		.end   = DMACH_HSI_I2SV40_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_HSI_I2SV40_RX,
+		.end   = DMACH_HSI_I2SV40_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+	.dev = {
+		.platform_data = &s3c_i2sv4_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
new file mode 100644
index 000000000000..b9e7a05f0129
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-rtc.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_RTC,
+		.end   = S3C64XX_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC_ALARM,
+		.end   = IRQ_RTC_ALARM,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_RTC_TIC,
+		.end   = IRQ_RTC_TIC,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		  = "s3c64xx-rtc",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
+	.resource	  = s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
new file mode 100644
index 000000000000..29c32d088515
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s3c64xx/dev-spi.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
+	[S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
+	[S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
+		s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
+		s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
+		s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
+		s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI0,
+		.end   = S3C64XX_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	  = s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi0);
+
+static struct resource s3c64xx_spi1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI1,
+		.end   = S3C64XX_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi1_resource),
+	.resource	  = s3c64xx_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi1);
+
+void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s3c64xx_spi0_pdata;
+		break;
+	case 1:
+		pd = &s3c64xx_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
new file mode 100644
index 000000000000..f797f748b999
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c64xx/dev-uart.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c64xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c64xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c6xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c64xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
+	},
+};
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
new file mode 100644
index 000000000000..9d0c43b4b687
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_CLKS_H
+#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
+
+#define S3C64XX_SPI_SRCCLK_PCLK		0
+#define S3C64XX_SPI_SRCCLK_SPIBUS	1
+#define S3C64XX_SPI_SRCCLK_48M		2
+
+#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..8e28e448dd20
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+extern void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
new file mode 100644
index 000000000000..d1b11e6e77e8
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 0 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
+	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
+	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
new file mode 100644
index 000000000000..2dce57d8c6f8
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 1 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
+	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
+	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 000000000000..a58c0cc7ba5e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,75 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(6 + width);
+
+	/* Set all the necessary GPH pins to special-function 1 */
+	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPC pins to special-function 1 */
+	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}