ARM: h1940: Use gpiolib for latch access

This patch adds gpiolib support for h1940 latch.
With this patch it's possible to use leds-gpio and uda1380
drivers (they require gpiolib support for appropriate pins).
And now it's possible to drop leds-h1940 driver.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 58 insertions, 6 deletions

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 3ba3bab139d0..f0493bdbf0dc 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -59,6 +59,12 @@
 #include <plat/mci.h>
 #include <plat/ts.h>
 
+#define H1940_LATCH		((void __force __iomem *)0xF8000000)
+
+#define H1940_PA_LATCH		S3C2410_CS2
+
+#define H1940_LATCH_BIT(x)	(1 << ((x) + 16 - S3C_GPIO_END))
+
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
 		.virtual	= (unsigned long)H1940_LATCH,
@@ -100,9 +106,16 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
 
 /* Board control latch control */
 
-static unsigned int latch_state = H1940_LATCH_DEFAULT;
+static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
+	H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE)	|
+	H1940_LATCH_BIT(H1940_LATCH_SDQ1)			|
+	H1940_LATCH_BIT(H1940_LATCH_LCD_P1)			|
+	H1940_LATCH_BIT(H1940_LATCH_LCD_P2)			|
+	H1940_LATCH_BIT(H1940_LATCH_LCD_P3)			|
+	H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN)   |
+	H1940_LATCH_BIT(H1940_LATCH_CPUQ5);
 
-void h1940_latch_control(unsigned int clear, unsigned int set)
+static void h1940_latch_control(unsigned int clear, unsigned int set)
 {
 	unsigned long flags;
 
@@ -116,7 +129,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
 	local_irq_restore(flags);
 }
 
-EXPORT_SYMBOL_GPL(h1940_latch_control);
+static inline int h1940_gpiolib_to_latch(int offset)
+{
+	return 1 << (offset + 16);
+}
+
+static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	int latch_bit = h1940_gpiolib_to_latch(offset);
+
+	h1940_latch_control(value ? 0 : latch_bit,
+		value ? latch_bit : 0);
+}
+
+static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	h1940_gpiolib_latch_set(chip, offset, value);
+	return 0;
+}
+
+static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
+					unsigned offset)
+{
+	return (latch_state >> (offset + 16)) & 1;
+}
+
+struct gpio_chip h1940_latch_gpiochip = {
+	.base			= H1940_LATCH_GPIO(0),
+	.owner			= THIS_MODULE,
+	.label			= "H1940_LATCH",
+	.ngpio			= 16,
+	.direction_output	= h1940_gpiolib_latch_output,
+	.set			= h1940_gpiolib_latch_set,
+	.get			= h1940_gpiolib_latch_get,
+};
 
 static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
@@ -125,10 +173,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			h1940_latch_control(0, H1940_LATCH_USB_DP);
+			gpio_set_value(H1940_LATCH_USB_DP, 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			h1940_latch_control(H1940_LATCH_USB_DP, 0);
+			gpio_set_value(H1940_LATCH_USB_DP, 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -303,6 +351,8 @@ static void __init h1940_map_io(void)
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
 	s3c_pm_init();
+
+	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
 /* H1940 and RX3715 need to reserve this for suspend */
@@ -342,9 +392,11 @@ static void __init h1940_init(void)
 	gpio_request(S3C2410_GPC(0), "LCD power");
 	gpio_request(S3C2410_GPC(5), "LCD power");
 	gpio_request(S3C2410_GPC(6), "LCD power");
-
 	gpio_direction_input(S3C2410_GPC(6));
 
+	gpio_request(H1940_LATCH_USB_DP, "USB pullup");
+	gpio_direction_output(H1940_LATCH_USB_DP, 0);
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }