ARM: qcom: Split Qualcomm support into legacy and multiplatform

Introduce a new mach-qcom that will support SoCs that intend to be
multiplatform compatible while keeping mach-msm to legacy SoC/board
support that will not transition over to multiplatform.

As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
to mach-qcom.

Signed-off-by: Kumar Gala <galak@codeaurora.org>

1 files changed, 137 insertions, 0 deletions

diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
new file mode 100644
index 000000000000..67823a7bec0d
--- /dev/null
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -0,0 +1,137 @@
+/*
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+extern void secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref msm_cpu_die(unsigned int cpu)
+{
+	wfi();
+}
+#endif
+
+static inline int get_core_count(void)
+{
+	/* 1 + the PART[1:0] field of MIDR */
+	return ((read_cpuid_id() >> 4) & 3) + 1;
+}
+
+static void msm_secondary_init(unsigned int cpu)
+{
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static void prepare_cold_cpu(unsigned int cpu)
+{
+	int ret;
+	ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
+				SCM_FLAG_COLDBOOT_CPU1);
+	if (ret == 0) {
+		void __iomem *sc1_base_ptr;
+		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+		if (sc1_base_ptr) {
+			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+			iounmap(sc1_base_ptr);
+		}
+	} else
+		printk(KERN_DEBUG "Failed to set secondary core boot "
+				  "address\n");
+}
+
+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	static int cold_boot_done;
+
+	/* Only need to bring cpu out of reset this way once */
+	if (cold_boot_done == false) {
+		prepare_cold_cpu(cpu);
+		cold_boot_done = true;
+	}
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system. The msm8x60
+ * does not support the ARM SCU, so just set the possible cpu mask to
+ * NR_CPUS.
+ */
+static void __init msm_smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct smp_operations msm_smp_ops __initdata = {
+	.smp_init_cpus		= msm_smp_init_cpus,
+	.smp_prepare_cpus	= msm_smp_prepare_cpus,
+	.smp_secondary_init	= msm_secondary_init,
+	.smp_boot_secondary	= msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= msm_cpu_die,
+#endif
+};