OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm

Move clockdomain wakeup dependency and sleep dependency data
structures from the powerdomain layer to the clockdomain layer, where
they belong.  These dependencies were originally placed in the
powerdomain layer due to unclear documentation; however, it is clear
now that these dependencies are between clockdomains.  For OMAP2/3,
this is not such a big problem, but for OMAP4 this needs to be fixed.

Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this
patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>

1 files changed, 8 insertions, 80 deletions

diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index d646c9979c38..faa8fc952d95 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -1,8 +1,8 @@
 /*
  * OMAP2/3 common powerdomain definitions
  *
- * Copyright (C) 2007-8 Texas Instruments, Inc.
- * Copyright (C) 2007-8 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Debugging and integration fixes by Jouni Högander
@@ -25,19 +25,8 @@
  * This file contains all of the powerdomains that have some element
  * of software control for the OMAP24xx and OMAP34XX chips.
  *
- * A few notes:
- *
  * This is not an exhaustive listing of powerdomains on the chips; only
  * powerdomains that can be controlled in software.
- *
- * A useful validation rule for struct powerdomain:
- * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array
- * must have a dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really
- * just software-controllable dependencies.  Non-software-controllable
- * dependencies do exist, but they are not encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
  */
 
 /*
@@ -47,26 +36,17 @@
  *
  * On the 2420, this is a 'C55 DSP called, simply, the DSP.  Its
  * powerdomain is called the "DSP power domain."  On the 2430, the
- * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1.  Its
- * powerdomain is still called the "DSP power domain."	On the 3430,
- * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but
- * its powerdomain is now called the "IVA2 power domain."
+ * on-board DSP is a 'C64 DSP, now called (along with its hardware
+ * accelerators) the IVA2 or IVA2.1.  Its powerdomain is still called
+ * the "DSP power domain." On the 3430, the DSP is a 'C64 DSP like the
+ * 2430, also known as the IVA2; but its powerdomain is now called the
+ * "IVA2 power domain."
  *
  * The 2420 also has something called the IVA, which is a separate ARM
  * core, and has nothing to do with the DSP/IVA2.
  *
  * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
  * address offset is different between the C55 and C64 DSPs.
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- */
-
-/*
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
  */
 
 #include <plat/powerdomain.h>
@@ -74,60 +54,11 @@
 #include "prcm-common.h"
 #include "prm.h"
 #include "cm.h"
-
-/* OMAP2/3-common powerdomains and wakeup dependencies */
-
-#ifndef CONFIG_ARCH_OMAP4
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- */
-static struct pwrdm_dep gfx_sgx_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "iva2_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
-					    CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
-					    CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-/*
- * 3430: CM_SLEEPDEP_CAM: MPU
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- */
-static struct pwrdm_dep cam_gfx_sleepdeps[] = {
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-#endif
-
-
 #include "powerdomains24xx.h"
 #include "powerdomains34xx.h"
 #include "powerdomains44xx.h"
 
-
-/*
- * OMAP2/3 common powerdomains
- */
+/* OMAP2/3-common powerdomains */
 
 #if defined(CONFIG_ARCH_OMAP24XX) | defined(CONFIG_ARCH_OMAP34XX)
 
@@ -140,8 +71,6 @@ static struct powerdomain gfx_omap2_pwrdm = {
 	.prcm_offs	  = GFX_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
 					   CHIP_IS_OMAP3430ES1),
-	.wkdep_srcs	  = gfx_sgx_wkdeps,
-	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
@@ -157,7 +86,6 @@ static struct powerdomain wkup_omap2_pwrdm = {
 	.name		= "wkup_pwrdm",
 	.prcm_offs	= WKUP_MOD,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
-	.dep_bit	= OMAP_EN_WKUP_SHIFT,
 };
 
 #endif