Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

1 files changed, 11 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 1dd195afa396..4b133d75c935 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -33,7 +34,7 @@
 
 #define ZOOM3_EHCI_RESET_GPIO		64
 
-static void __init omap_zoom_init_irq(void)
+static void __init omap_zoom_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	if (machine_is_omap_zoom2())
@@ -42,14 +43,12 @@ static void __init omap_zoom_init_irq(void)
 	else if (machine_is_omap_zoom3())
 		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
 					  h8mbx00u0mer0em_sdrc_params);
-
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	/* WLAN POWER ENABLE - GPIO 101 */
 	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* WLAN SDIO: MMC3 CMD */
@@ -126,8 +125,8 @@ static void __init omap_zoom_init(void)
 		usbhs_init(&usbhs_bdata);
 	}
 
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
+						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 	zoom_display_init();
@@ -135,18 +134,20 @@ static void __init omap_zoom_init(void)
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_zoom_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_zoom_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
 MACHINE_END