Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...

1 files changed, 44 insertions, 26 deletions

diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index 925048e7adfe..0f65177f9e5f 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
+#include <asm/gpio.h>
 
 #include <asm/arch-ns9xxx/board.h>
 #include <asm/arch-ns9xxx/regs-sys.h>
@@ -44,7 +45,13 @@ static void a9m9750dev_fpga_ack_irq(unsigned int irq)
 
 static void a9m9750dev_fpga_mask_irq(unsigned int irq)
 {
-	FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0)));
+	u8 ier;
+
+	ier = __raw_readb(FPGA_IER);
+
+	ier &= ~(1 << (irq - FPGA_IRQ(0)));
+
+	__raw_writeb(ier, FPGA_IER);
 }
 
 static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
@@ -55,7 +62,13 @@ static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
 
 static void a9m9750dev_fpga_unmask_irq(unsigned int irq)
 {
-	FPGA_IER |= 1 << (irq - FPGA_IRQ(0));
+	u8 ier;
+
+	ier = __raw_readb(FPGA_IER);
+
+	ier |= 1 << (irq - FPGA_IRQ(0));
+
+	__raw_writeb(ier, FPGA_IER);
 }
 
 static struct irq_chip a9m9750dev_fpga_chip = {
@@ -68,30 +81,34 @@ static struct irq_chip a9m9750dev_fpga_chip = {
 static void a9m9750dev_fpga_demux_handler(unsigned int irq,
 		struct irq_desc *desc)
 {
-	int stat = FPGA_ISR;
+	u8 stat = __raw_readb(FPGA_ISR);
+
+	desc->chip->mask_ack(irq);
 
 	while (stat != 0) {
 		int irqno = fls(stat) - 1;
+		struct irq_desc *fpgadesc;
 
 		stat &= ~(1 << irqno);
 
-		desc = irq_desc + FPGA_IRQ(irqno);
+		fpgadesc = irq_desc + FPGA_IRQ(irqno);
 
-		desc_handle_irq(FPGA_IRQ(irqno), desc);
+		desc_handle_irq(FPGA_IRQ(irqno), fpgadesc);
 	}
+
+	desc->chip->unmask(irq);
 }
 
 void __init board_a9m9750dev_init_irq(void)
 {
-	u32 reg;
+	u32 eic;
 	int i;
 
-	/*
-	 * configure gpio for IRQ_EXT2
-	 * use GPIO 11, because GPIO 32 is used for the LCD
-	 */
-	/* XXX: proper GPIO handling */
-	BBU_GCONFb1(1) &= ~0x2000;
+	if (gpio_request(11, "board a9m9750dev extirq2") == 0)
+		ns9xxx_gpio_configure(11, 0, 1);
+	else
+		printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_EXT2\n",
+				__func__);
 
 	for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
 		set_irq_chip(i, &a9m9750dev_fpga_chip);
@@ -100,10 +117,10 @@ void __init board_a9m9750dev_init_irq(void)
 	}
 
 	/* IRQ_EXT2: level sensitive + active low */
-	reg = SYS_EIC(2);
-	REGSET(reg, SYS_EIC, PLTY, AL);
-	REGSET(reg, SYS_EIC, LVEDG, LEVEL);
-	SYS_EIC(2) = reg;
+	eic = __raw_readl(SYS_EIC(2));
+	REGSET(eic, SYS_EIC, PLTY, AL);
+	REGSET(eic, SYS_EIC, LVEDG, LEVEL);
+	__raw_writel(eic, SYS_EIC(2));
 
 	set_irq_chained_handler(IRQ_EXT2,
 			a9m9750dev_fpga_demux_handler);
@@ -167,17 +184,18 @@ void __init board_a9m9750dev_init_machine(void)
 	u32 reg;
 
 	/* setup static CS0: memory base ... */
-	REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB,
-			NS9XXX_CSxSTAT_PHYS(0) >> 12);
+	reg = __raw_readl(SYS_SMCSSMB(0));
+	REGSETIM(reg, SYS_SMCSSMB, CSxB, NS9XXX_CSxSTAT_PHYS(0) >> 12);
+	__raw_writel(reg, SYS_SMCSSMB(0));
 
 	/* ... and mask */
-	reg = SYS_SMCSSMM(0);
+	reg = __raw_readl(SYS_SMCSSMM(0));
 	REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
 	REGSET(reg, SYS_SMCSSMM, CSEx, EN);
-	SYS_SMCSSMM(0) = reg;
+	__raw_writel(reg, SYS_SMCSSMM(0));
 
 	/* setup static CS0: memory configuration */
-	reg = MEM_SMC(0);
+	reg = __raw_readl(MEM_SMC(0));
 	REGSET(reg, MEM_SMC, PSMC, OFF);
 	REGSET(reg, MEM_SMC, BSMC, OFF);
 	REGSET(reg, MEM_SMC, EW, OFF);
@@ -185,13 +203,13 @@ void __init board_a9m9750dev_init_machine(void)
 	REGSET(reg, MEM_SMC, PC, AL);
 	REGSET(reg, MEM_SMC, PM, DIS);
 	REGSET(reg, MEM_SMC, MW, 8);
-	MEM_SMC(0) = reg;
+	__raw_writel(reg, MEM_SMC(0));
 
 	/* setup static CS0: timing */
-	MEM_SMWED(0) = 0x2;
-	MEM_SMOED(0) = 0x2;
-	MEM_SMRD(0) = 0x6;
-	MEM_SMWD(0) = 0x6;
+	__raw_writel(0x2, MEM_SMWED(0));
+	__raw_writel(0x2, MEM_SMOED(0));
+	__raw_writel(0x6, MEM_SMRD(0));
+	__raw_writel(0x6, MEM_SMWD(0));
 
 	platform_add_devices(board_a9m9750dev_devices,
 			ARRAY_SIZE(board_a9m9750dev_devices));