Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD

There are some more conflicts than detected by git, namely support for
the newly added cpuimx machines needed to be converted to dynamic device
registration.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Conflicts:
	arch/arm/mach-imx/Makefile
	arch/arm/mach-imx/devices.c
	arch/arm/mach-imx/devices.h
	arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
	arch/arm/mach-mx2/Kconfig
	arch/arm/mach-mx25/Makefile
	arch/arm/mach-mx25/devices.c
	arch/arm/plat-mxc/include/mach/mx25.h
	arch/arm/plat-mxc/include/mach/mxc_nand.h

26 files changed, 372 insertions, 460 deletions

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index b09e9a94adf1..a11112afde5e 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -15,6 +15,8 @@ comment "MX3 platforms:"
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
 	help
 	  Include support for MX31ADS platform. This includes specific
@@ -34,6 +36,9 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -42,6 +47,7 @@ config MACH_PCM037
 config MACH_PCM037_EET
 	bool "Support pcm037 EET board extensions"
 	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Add support for PCM037 EET baseboard extensions. If you are using the
 	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
@@ -51,6 +57,9 @@ config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
 	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -58,6 +67,9 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -74,6 +86,9 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -82,6 +97,8 @@ config MACH_MX31MOBOARD
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
@@ -90,6 +107,7 @@ config MACH_MX31LILLY
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -97,6 +115,9 @@ config MACH_QONG
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -105,6 +126,9 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
@@ -113,6 +137,7 @@ config MACH_ARMADILLO5X0
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific
@@ -121,6 +146,7 @@ config MACH_MX35_3DS
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
@@ -128,6 +154,9 @@ config MACH_KZM_ARM11_01
 config MACH_EUKREA_CPUIMX35
 	bool "Support Eukrea CPUIMX35 Platform"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index ef68ff55a7b6..54bc935acdc6 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
 obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
new file mode 100644
index 000000000000..3b1a44a20585
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+
+#define imx31_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
+#define imx31_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
+#define imx31_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+
+#define imx31_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
+#define imx31_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
+#define imx31_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
+#define imx31_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
+#define imx31_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+
+#define imx31_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+
+#define imx31_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
+#define imx31_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
+#define imx31_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
new file mode 100644
index 000000000000..536d9b9a250b
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+
+#define imx35_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
+#define imx35_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
+#define imx35_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+
+#define imx35_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
+#define imx35_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
+#define imx35_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+
+#define imx35_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+
+#define imx35_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
+#define imx35_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index db7acd6e9101..a4fd1a26fc91 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,108 +25,10 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx3_camera.h>
 
 #include "devices.h"
 
-static struct resource uart0[] = {
-	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource uart3[] = {
-	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-#endif /* CONFIG_ARCH_MX31 */
-
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
@@ -147,7 +49,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx3x_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -167,82 +69,6 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= 0, /* runtime dependent */
-		.end	= 0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
-	{
-		.start = I2C_BASE_ADDR,
-		.end = I2C_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C,
-		.end = MXC_INT_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
-	.resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
-	{
-		.start = I2C2_BASE_ADDR,
-		.end = I2C2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C2,
-		.end = MXC_INT_I2C2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
-	.resource = mxc_i2c1_resources,
-};
-
-static struct resource mxc_i2c2_resources[] = {
-	{
-		.start = I2C3_BASE_ADDR,
-		.end = I2C3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C3,
-		.end = MXC_INT_I2C3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
-	.resource = mxc_i2c2_resources,
-};
-
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
 	{
@@ -455,68 +281,7 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-/*
- * SPI master controller
- * 3 channels
- */
-static struct resource mxc_spi_0_resources[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_1_resources[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_2_resources[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-	.resource = mxc_spi_0_resources,
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-	.resource = mxc_spi_1_resources,
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-	.resource = mxc_spi_2_resources,
-};
-
-#ifdef CONFIG_ARCH_MX35
+#if defined(CONFIG_ARCH_MX35)
 static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
@@ -628,16 +393,15 @@ struct platform_device imx_kpp_device = {
 
 static int __init mx3_devices_init(void)
 {
+#if defined(CONFIG_ARCH_MX31)
 	if (cpu_is_mx31()) {
-		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
 		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
+#endif
+#if defined(CONFIG_ARCH_MX35)
 	if (cpu_is_mx35()) {
-		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -653,6 +417,7 @@ static int __init mx3_devices_init(void)
 		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 2c3c8646a29e..e5535234839f 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
@@ -20,9 +10,6 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 678597852443..368a603accfe 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -46,6 +46,7 @@
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
@@ -196,7 +197,7 @@ static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -238,7 +239,7 @@ void __init eukrea_mbimxsd_baseboard_init(void)
 	);
 #endif
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx35_add_imx_uart1(&uart_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec91af2d..96aadcadb4ff 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,16 +48,14 @@
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "crm_regs.h"
 
@@ -301,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = {
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 };
@@ -493,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = {
 };
 
 /* UART device data */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&mxc_i2c_device1,
 	&armadillo5x0_button_device,
 };
 
@@ -512,10 +510,11 @@ static void __init armadillo5x0_init(void)
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	/* SMSC9118 IRQ pin */
 	gpio_direction_input(MX31_PIN_GPIO1_0);
@@ -532,7 +531,7 @@ static void __init armadillo5x0_init(void)
 			    &armadillo5x0_nor_flash_pdata);
 
 	/* Register NAND Flash */
-	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 55caa5cb8bc7..4f6146d31328 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -40,20 +40,20 @@
 #include <mach/board-eukrea_cpuimx35.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx35.h>
 #include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxi2c_platform_data eukrea_cpuimx35_i2c_1_data = {
+static const struct imxi2c_platform_data
+eukrea_cpuimx35_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
 
@@ -134,7 +134,8 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
 	MX35_PAD_ATA_DA2__GPIO3_2,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+eukrea_cpuimx35_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 	.flash_bbt	= 1,
@@ -181,12 +182,12 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
 
 	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
 			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
-	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx35_i2c_1_data);
+	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
 
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d1a6de..5b23e416d6c7 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -16,10 +16,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -37,13 +33,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-kzmarm11.h>
 #include <mach/clock.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/memory.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (					\
@@ -51,6 +46,23 @@
 	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
 	MX31_IO_ADDRESS(x))
 
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
@@ -173,15 +185,14 @@ static inline int kzm_init_smsc9118(void)
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init kzm_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 }
 #else
 static inline void kzm_init_imx_uart(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 7e8d09ab9e6c..d4d9e7a1f735 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -37,19 +33,46 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31_3ds.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 static int mx31_3ds_pins[] = {
@@ -145,7 +168,7 @@ static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi1_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
@@ -165,7 +188,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
@@ -225,7 +249,7 @@ static struct fsl_usb2_platform_data usbotg_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -407,10 +431,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi1_pdata);
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a1895c20..94b3e7c42404 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -33,8 +29,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -43,14 +37,45 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
 
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -98,7 +123,7 @@ static inline int mxc_init_extuart(void)
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -112,7 +137,7 @@ static unsigned int uart_pins[] = {
 static inline void mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -475,7 +500,7 @@ static void mxc_init_i2c(void)
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
 
-	mxc_register_device(&mxc_i2c_device1, NULL);
+	imx31_add_imx_i2c1(NULL);
 }
 #else
 static void mxc_init_i2c(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 46bf57c44372..84942cf41b63 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -46,10 +42,10 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -257,12 +253,12 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -315,8 +311,8 @@ static void __init mx31lilly_board_init(void)
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
 
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 2b6d11400877..da236c497d2a 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -42,14 +38,12 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -69,7 +63,8 @@ static unsigned int mx31lite_pins[] = {
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst  = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -112,7 +107,7 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -253,9 +248,9 @@ static void __init mxc_board_init(void)
 
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
-	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
 #if defined(CONFIG_USB_ULPI)
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 33a8d35498a7..67776bc61c33 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -42,16 +38,15 @@
 #include <mach/board-mx31moboard.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
@@ -130,24 +125,36 @@ static struct platform_device mx31moboard_flash = {
 
 static int moboard_uart0_init(struct platform_device *pdev)
 {
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	return 0;
+	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	if (ret)
+		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+
+	return ret;
+}
+
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
 }
 
-static struct imxuart_platform_data uart0_pdata = {
+static const struct imxuart_platform_data uart0_pdata __initconst = {
 	.init = moboard_uart0_init,
+	.exit = moboard_uart0_exit,
 };
 
-static struct imxuart_platform_data uart4_pdata = {
+static const struct imxuart_platform_data uart4_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
 	.bitrate = 400000,
 };
 
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -156,7 +163,7 @@ static int moboard_spi1_cs[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master moboard_spi1_master = {
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
 	.chipselect	= moboard_spi1_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
 };
@@ -220,11 +227,54 @@ static struct mc13783_regulator_init_data moboard_regulators[] = {
 	},
 };
 
+static struct mc13783_led_platform_data moboard_led[] = {
+	{
+		.id = MC13783_LED_R1,
+		.name = "coreboard-led-4:red",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_G1,
+		.name = "coreboard-led-4:green",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_B1,
+		.name = "coreboard-led-4:blue",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_R2,
+		.name = "coreboard-led-5:red",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_G2,
+		.name = "coreboard-led-5:green",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_B2,
+		.name = "coreboard-led-5:blue",
+		.max_current = 3,
+	},
+};
+
+static struct mc13783_leds_platform_data moboard_leds = {
+	.num_leds = ARRAY_SIZE(moboard_led),
+	.led = moboard_led,
+	.flags = MC13783_LED_SLEWLIMTC,
+	.abmode = MC13783_LED_AB_DISABLED,
+	.tc1_period = MC13783_LED_PERIOD_10MS,
+	.tc2_period = MC13783_LED_PERIOD_10MS,
+};
+
 static struct mc13783_platform_data moboard_pmic = {
 	.regulators = moboard_regulators,
 	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.leds = &moboard_leds,
 	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
-		MC13783_USE_ADC,
+		MC13783_USE_ADC | MC13783_USE_LED,
 };
 
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -243,7 +293,7 @@ static int moboard_spi2_cs[] = {
 	MXC_SPI_CS(1),
 };
 
-static struct spi_imx_master moboard_spi2_master = {
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
 	.chipselect	= moboard_spi2_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
 };
@@ -456,15 +506,14 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
-
-	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+	imx31_add_imx_uart0(&uart0_pdata);
+	imx31_add_imx_uart4(&uart4_pdata);
 
-	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
-	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+	imx31_add_imx_i2c0(&moboard_i2c0_data);
+	imx31_add_imx_i2c1(&moboard_i2c1_data);
 
-	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
-	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+	imx31_add_spi_imx1(&moboard_spi1_pdata);
+	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index bcac84d4dca4..1c30d7212f17 100644
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -12,10 +12,12 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
  */
 
 #include <linux/types.h>
@@ -32,12 +34,12 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -90,7 +92,7 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx35_add_imx_uart0(&uart_pdata);
 
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index bb6c056854e9..8a292dd1a714 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -43,20 +39,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
 #include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "pcm037.h"
 
@@ -225,7 +218,7 @@ static struct platform_device pcm037_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -279,16 +272,17 @@ static struct platform_device pcm037_sram_device = {
 	.resource = &pcm038_sram_resource,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
 	.bitrate = 20000,
 };
 
@@ -615,9 +609,10 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
@@ -635,10 +630,10 @@ static void __init mxc_board_init(void)
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+	imx31_add_imx_i2c1(&pcm037_i2c1_data);
+	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc40..c8b98218efee 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,9 +13,6 @@
 #include <linux/spi/spi.h>
 
 #include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
 #include <mach/iomux-mx3.h>
 
 #include <asm/mach-types.h>
@@ -64,7 +61,7 @@ static struct spi_board_info pcm037_spi_dev[] = {
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
-struct spi_imx_master pcm037_spi1_master = {
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
@@ -184,7 +181,7 @@ static int eet_init_devices(void)
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+	imx35_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 8071b7281c4b..b92f624c755e 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -40,19 +36,15 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
@@ -122,12 +114,12 @@ static struct platform_device pcm043_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
 
@@ -304,7 +296,8 @@ static struct imx_ssi_platform_data pcm043_ssi_pdata = {
 	.flags = IMX_SSI_USE_AC97,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -363,17 +356,17 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx35_add_imx_uart1(&uart_pdata);
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 #endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b8323a17..d44ac70222a5 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -34,9 +30,9 @@
 #include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
 /* FPGA defines */
@@ -62,7 +58,7 @@
  * This file contains the board-specific initialization routines.
  */
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -73,11 +69,11 @@ static int uart_pins[] = {
 	MX31_PIN_RXD1__RXD1
 };
 
-static inline void mxc_init_imx_uart(void)
+static inline void __init mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
 			"uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 
 static struct resource dnet_resources[] = {
@@ -116,7 +112,7 @@ static struct physmap_flash_data qong_flash_data = {
 
 static struct resource qong_flash_resource = {
 	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 6858a4f9806c..a378fba49a8b 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -97,8 +93,11 @@ void __init mx35_map_io(void)
 }
 #endif
 
+int imx3x_register_gpios(void);
+
 void __init mx31_init_irq(void)
 {
+	imx3x_register_gpios();
 	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 7aebd74a12e8..827fd3c80201 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -36,13 +32,13 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
 #include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -96,7 +92,7 @@ static unsigned int lilly_db_board_pins[] __initdata = {
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -217,9 +213,9 @@ void __init mx31lilly_db_init(void)
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 5f05bfbec380..7b0e74e275ba 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -37,12 +33,11 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
 #include <mach/mmc.h>
-#include <mach/spi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -76,7 +71,7 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -161,7 +156,7 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -201,9 +196,9 @@ void __init mx31lite_db_init(void)
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	mxc_register_device(&imx_wdt_device0, NULL);
 	mxc_register_device(&imx_rtc_device0, NULL);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 582299cb2c08..fc395a7a8599 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -27,13 +23,13 @@
 #include <linux/usb/otg.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int devboard_pins[] = {
@@ -56,7 +52,7 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -230,7 +226,7 @@ void __init mx31moboard_devboard_init(void)
 	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
 		"devboard");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 4930f8c27e66..0551eb39d97e 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 293eea6d9d97..40c3e7564cb6 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -30,7 +26,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
 #include <mach/mxc_ehci.h>
@@ -38,6 +33,7 @@
 
 #include <media/soc_camera.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int smartbot_pins[] = {
@@ -59,7 +55,7 @@ static unsigned int smartbot_pins[] = {
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -183,8 +179,7 @@ void __init mx31moboard_smartbot_init(int board)
 	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
 		"smartbot");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
+	imx31_add_imx_uart1(&uart_pdata);
 
 	switch (board) {
 	case MX31SMARTBOT: