[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

21 files changed, 1102 insertions, 0 deletions

diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
new file mode 100644
index 000000000000..4671558cdd51
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   08-02-2000	SJH	Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <mach/hardware.h>
+
+#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR		0x00000000
+#define AUX_DIAG_LED_ON		0x00000002
+#define AUX_RTS_UART1		0x00000004
+#define AUX_DTR_UART1		0x00000008
+#define AUX_KBD_COLUMN_12_HIGH	0x00000010
+#define AUX_KBD_COLUMN_12_OFF	0x00000020
+#define AUX_KBD_COLUMN_13_HIGH	0x00000040
+#define AUX_KBD_COLUMN_13_OFF	0x00000080
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 000000000000..34eed2a63e69
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #io_phys		@ physical base address
+		movne	\rx, #io_virt		@ virtual address
+		add	\rx, \rx, #0x00044000	@ UART1
+@		add	\rx, \rx, #0x00045000	@ UART2
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
new file mode 100644
index 000000000000..c7e48bd4590c
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-l7200/include/mach/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  08-29-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS         0xd0000000
+
+#define DMA_S0                  0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
new file mode 100644
index 000000000000..1726d91fc1d3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.equ	irq_base_addr,	IO_BASE_2
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
+		add	\irqstat, \irqstat, #0x00001000		@ Status reg
+		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
+		mov     \irqnr, #0
+1001:		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tsteq   \irqnr, #32
+		beq     1001b
+		teq     \irqnr, #32
+		.endm
+
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
new file mode 100644
index 000000000000..2b7086a26b81
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   07-28-2000	SJH	Created file
+ *   08-02-2000	SJH	Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+	unsigned int TIMERLOAD;
+	unsigned int TIMERVALUE;
+	unsigned int TIMERCONTROL;
+	unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE		(IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define	GPT_PRESCALE_1		0x00000000
+#define	GPT_PRESCALE_16		0x00000004
+#define	GPT_PRESCALE_256	0x00000008
+#define GPT_MODE_FREERUN	0x00000000
+#define GPT_MODE_PERIODIC	0x00000040
+#define GPT_ENABLE		0x00000080
+#define GPT_BZTOG		0x00000100
+#define GPT_BZMOD		0x00000200
+#define GPT_LOAD_MASK 		0x0000ffff
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
new file mode 100644
index 000000000000..c7b0a5d7b8bb
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ *      arch/arm/mach-l7200/include/mach/gpio.h
+ *
+ *      Registers and  helper functions for the L7200 Link-Up Systems
+ *      GPIO.
+ *
+ *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF     0x000
+#define PADDR_OFF    0x004
+#define PASBSR_OFF   0x008
+#define PAEENR_OFF   0x00c
+#define PAESNR_OFF   0x010
+#define PAESTR_OFF   0x014
+#define PAIMR_OFF    0x018
+#define PAINT_OFF    0x01c
+
+#define PBDR_OFF     0x020
+#define PBDDR_OFF    0x024
+#define PBSBSR_OFF   0x028
+#define PBIMR_OFF    0x038
+#define PBINT_OFF    0x03c
+
+#define PCDR_OFF     0x040
+#define PCDDR_OFF    0x044
+#define PCSBSR_OFF   0x048
+#define PCIMR_OFF    0x058
+#define PCINT_OFF    0x05c
+
+#define PDDR_OFF     0x060
+#define PDDDR_OFF    0x064
+#define PDSBSR_OFF   0x068
+#define PDEENR_OFF   0x06c
+#define PDESNR_OFF   0x070
+#define PDESTR_OFF   0x074
+#define PDIMR_OFF    0x078
+#define PDINT_OFF    0x07c
+
+#define PEDR_OFF     0x080
+#define PEDDR_OFF    0x084
+#define PESBSR_OFF   0x088
+#define PEEENR_OFF   0x08c
+#define PEESNR_OFF   0x090
+#define PEESTR_OFF   0x094
+#define PEIMR_OFF    0x098
+#define PEINT_OFF    0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN         0x02
+#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
new file mode 100644
index 000000000000..c31909cfc254
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-l7200/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the 
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   02-01-2000	 RS	Created L7200 version, derived from rpc code
+ *   03-21-2000	SJH	Cleaned up file
+ *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
+ *   04-25-2000	SJH	Removed unused symbols and such
+ *   05-05-2000	SJH	Complete rewrite
+ *   07-31-2000	SJH	Added undocumented debug auxillary port to
+ *			get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START		0xf0000000
+#define RAM_SIZE		0x02000000
+#define RAM_BASE		0xc0000000
+
+#define IO_START		0x80000000      /* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			0xd0000000
+
+#define IO_START_2		0x90000000      /* I/O */
+#define IO_SIZE_2		0x01000000
+#define IO_BASE_2		0xd1000000
+
+#define AUX_START		0x1a000000      /* AUX PORT */
+#define AUX_SIZE 		0x01000000
+#define AUX_BASE		0xd2000000
+
+#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
+#define FLASH1_SIZE 		0x01000000
+#define FLASH1_BASE		0xd3000000
+
+#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
+#define FLASH2_SIZE 		0x01000000
+#define FLASH2_BASE		0xd4000000
+
+#define ISA_START		0x20000000	/* ISA */
+#define ISA_SIZE		0x20000000
+#define ISA_BASE		0xe0000000
+
+#define PCIO_BASE		IO_BASE
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
new file mode 100644
index 000000000000..d432ba9e5dff
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-l7200/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
+ *  08-31-2000	SJH	Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
new file mode 100644
index 000000000000..7edffd713c5b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-l7200/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000 RS	Create l7200 version
+ *   03-28-2000 SJH	Removed unused interrupt
+ *   07-28-2000 SJH	Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ *       interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS          32
+
+#define IRQ_STWDOG        0   /* Watchdog timer */
+#define IRQ_PROG          1   /* Programmable interrupt */
+#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
+#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
+#define IRQ_GCTC1         4   /* Timer 1 */
+#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
+#define IRQ_DMA           6   /* DMA controller */
+#define IRQ_CLCD          7   /* Color LCD controller */
+#define IRQ_SM_RX         8   /* Smart card */
+#define IRQ_SM_TX         9   /* Smart cart */
+#define IRQ_SM_RST       10   /* Smart card */
+#define IRQ_SIB          11   /* Serial Interface Bus */
+#define IRQ_MMC          12   /* MultiMediaCard */
+#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
+#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
+#define IRQ_SPI          15   /* SPI slave */
+#define IRQ_UART_1       16   /* UART 1 */
+#define IRQ_UART_2       17   /* UART 2 */
+#define IRQ_IRDA         18   /* IRDA */
+#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
+#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
+#define IRQ_GPIO         21   /* General Purpose IO */
+#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
+#define IRQ_M2M          23   /* Memory to memory DMA  */
+#define IRQ_RESERVED     24   /* RESERVED, don't use */
+#define IRQ_INTF         25   /* External active low interrupt */
+#define IRQ_INT0         26   /* External active low interrupt */
+#define IRQ_INT1         27   /* External active low interrupt */
+#define IRQ_INT2         28   /* External active low interrupt */
+#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO       30   /* Low batery or external power */
+#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
new file mode 100644
index 000000000000..f338cf3ffd93
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ *  03-13-2000	SJH	Created
+ *  04-13-2000  RS      Changed bus macros for new addr
+ *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET     UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
new file mode 100644
index 000000000000..3959871e8361
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmpcon.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   DC/DC converter register.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
+#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST     0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
+	
+/* PMPCON = 0x811;   // too light and fuzzy
+ * PMPCON = 0x844;   
+ * PMPCON = 0x866;   // better color poor depth
+ * PMPCON = 0x888;   // Darker but better depth 
+ * PMPCON = 0x899;   // Darker even better depth
+ * PMPCON = 0x8aa;   // too dark even better depth
+ * PMPCON = 0X8cc;   // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
new file mode 100644
index 000000000000..a2da7aedf208
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmu.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   Power Management Unit (PMU).
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
+#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+     unsigned int CURRENT;  /* Current configuration register */
+     unsigned int NEXT;     /* Next configuration register */
+     unsigned int reserved;
+     unsigned int RUN;      /* Run configuration register */
+     unsigned int COMM;     /* Configuration command register */
+     unsigned int SDRAM;    /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
+#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
+#define GET_FASTBUS(reg)  (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
+#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
+#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL   1<<25
+#define CHANGE_NOSTALL   2<<25
+#define CHANGE_STALL     3<<25
+
+#define INTRET           1<<17
+#define OSCEN            1<<16
+#define OSCMUX           1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0         0<<9         /*  3.6864 MHz */
+#define PLLMUL_1         1<<9         /*  ?????? MHz */
+#define PLLMUL_5         5<<9         /*  18.432 MHz */
+#define PLLMUL_10       10<<9         /*  36.864 MHz */
+#define PLLMUL_18       18<<9         /*  ?????? MHz */
+#define PLLMUL_20       20<<9         /*  73.728 MHz */
+#define PLLMUL_32       32<<9         /*  ?????? MHz */
+#define PLLMUL_35       35<<9         /* 129.024 MHz */
+#define PLLMUL_36       36<<9         /*  ?????? MHz */
+#define PLLMUL_39       39<<9         /*  ?????? MHz */
+#define PLLMUL_40       40<<9         /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1        1<<18
+#define CRCLOCK_2        2<<18
+#define CRCLOCK_4        4<<18
+#define CRCLOCK_8        8<<18
+#define CRCLOCK_16      16<<18
+#define CRCLOCK_32      32<<18
+#define CRCLOCK_63      63<<18
+#define CRCLOCK_127    127<<18
+
+#define PLLEN            1<<8
+#define PLLMUX           1<<7
+#define SDR_STOP         1<<6
+#define SYSCLKEN         1<<5
+
+#define BCLK_DIV_4       2<<3
+#define BCLK_DIV_2       1<<3
+#define BCLK_DIV_1       0<<3
+
+#define SDRB_SEL         1<<2
+#define SDRF_SEL         1<<1
+#define FASTBUS          1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK        1<<1  /* Read-only */
+#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK       1<<3  /* Read-only */
+#define PICEN            1<<4  /* Enable Co-procesor */
+#define PICTEST          1<<5
+
+#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
new file mode 100644
index 000000000000..adc05e5f8378
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-20-2000  SJH     Created
+ *  03-26-2000  SJH     Added flags for serial ports
+ *  03-27-2000  SJH     Corrected BASE_BAUD value
+ *  04-14-2000  RS      Made register addr dependent on IO_BASE
+ *  05-03-2000  SJH     Complete rewrite
+ *  05-09-2000	SJH	Stripped out architecture specific serial stuff
+ *                      and placed it in a separate file
+ *  07-28-2000	SJH	Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD	3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS		\
+	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
+	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
+	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
new file mode 100644
index 000000000000..645f1c5e568d
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-09-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <mach/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE	(IO_BASE + 0x00044000)
+#define UART2_BASE	(IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR			0x00	/* Tx/Rx data */
+#define RXSTAT			0x04	/* Rx status */
+#define H_UBRLCR		0x08	/* mode register high */
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
+#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
+#define UARTCON			0x14	/* control register */
+#define UARTFLG			0x18	/* flag register */
+#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
+#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110			0x827
+#define BR_1200			0x06e
+#define BR_2400			0x05f
+#define BR_4800			0x02f
+#define BR_9600			0x017
+#define BR_14400		0x00f
+#define BR_19200		0x00b
+#define BR_38400		0x005
+#define BR_57600		0x003
+#define BR_76800 		0x002
+#define BR_115200		0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR		0x00	/* No error */
+#define RXSTAT_FRM_ERR		0x01	/* Framing error */
+#define RXSTAT_PAR_ERR		0x02	/* Parity error */
+#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK		0x01	/* generate break on tx */
+#define UBRLCR_PEN		0x02	/* enable parity */
+#define UBRLCR_PDIS		0x00	/* disable parity */
+#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
+#define UBRLCR_FIFO		0x10	/* enable FIFO */
+#define UBRLCR_LEN5		0x60	/* word length5 */
+#define UBRLCR_LEN6		0x40	/* word length6 */
+#define UBRLCR_LEN7		0x20	/* word length7 */
+#define UBRLCR_LEN8		0x00	/* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN		0x01	/* Enable UART */
+#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
+#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
+#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
+#define UARTFLG_DCD		0x04	/* Data carrier detect */
+#define UARTFLG_DSR		0x02	/* Data set ready */
+#define UARTFLG_CTS		0x01	/* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT		0x01	/* TX interrupt */
+#define UART_RXINT		0x02	/* RX interrupt */
+#define UART_RXERRINT		0x04	/* RX error interrupt */
+#define UART_MSINT		0x08	/* Modem Status interrupt */
+#define UART_UDINT		0x10	/* UART Disabled interrupt */
+#define UART_ALLIRQS		0x1f	/* All interrupts */
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
new file mode 100644
index 000000000000..965728712cf3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sib.h
+ *
+ *  Registers and helper functions for the Serial Interface Bus.
+ *
+ *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
+     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
+     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
+     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
+     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
+     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
+     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ   9216000  /* Hertz */
+#define AUDIO_FREQ         5000  /* Hertz */
+#define TELECOM_FREQ       5000  /* Hertz */
+
+#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57      AUDIO_DIVIDE
+#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
+#define MCCR_MCE        (1 << 16)             /* SIB enable */
+#define MCCR_ECS        (1 << 17)             /* External Clock Select */
+#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
+#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
+#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
+#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW               (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE   GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE      GET_CRC
+#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
new file mode 100644
index 000000000000..2d7722be60ea
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sys-clock.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   System clocks.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+     unsigned int ENABLE;
+     unsigned int ESYNC;
+     unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN          1<<0
+#define B18M_EN         1<<1
+#define CLK3M6_EN       1<<2
+#define BUART_EN        1<<3
+#define CLK18MU_EN      1<<4
+#define FIR_EN          1<<5
+#define MIRN_EN         1<<6
+#define UARTM_EN        1<<7
+#define SIBADC_EN       1<<8
+#define ALTD_EN         1<<9
+#define CLCLK_EN        1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV      1<<0
+#define MIR_SEL         1<<1
+#define SSP_SEL         1<<4
+#define MM_DIV          1<<5
+#define MM_SEL          1<<6
+#define ADC_SEL_2       0<<7
+#define ADC_SEL_4       1<<7
+#define ADC_SEL_8       3<<7
+#define ADC_SEL_16      7<<7
+#define ADC_SEL_32      0x0f<<7
+#define ADC_SEL_64      0x1f<<7
+#define ADC_SEL_128     0x3f<<7
+#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
new file mode 100644
index 000000000000..5272abee0d0e
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ *  03-21-2000  SJH	Created
+ *  04-26-2000  SJH	Fixed functions
+ *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
+ *  05-31-2000  SJH	Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
new file mode 100644
index 000000000000..061771c2c2bd
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-l7200/include/mach/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000	RS	Created l7200 version, derived from rpc code
+ *   05-03-2000	SJH	Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <mach/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE	(IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32	0x00      /* 32 Hz tick */
+#define RTC_RATE_64	0x10      /* 64 Hz tick */
+#define RTC_RATE_128	0x20      /* 128 Hz tick */
+#define RTC_RATE_256	0x30      /* 256 Hz tick */
+#define RTC_EN_ALARM	0x01      /* Enable alarm */
+#define RTC_EN_TIC	0x04      /* Enable counter */
+#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	timer_irq.handler = timer_interrupt;
+
+	setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
new file mode 100644
index 000000000000..ffc96a63b5a2
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-l7200/include/mach/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000  RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ *       must be changed when choosing a different tick
+ *       rate. The value of HZ in 'param.h' must also
+ *       be changed to match below.
+ */
+#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
new file mode 100644
index 000000000000..591c962bb315
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-l7200/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-01-2000	SJH	Created
+ *  05-13-2000	SJH	Filled in function bodies
+ *  07-26-2000	SJH	Removed hard coded baud rate
+ */
+
+#include <mach/hardware.h>
+
+#define IO_UART  IO_START + 0x00044000
+
+#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p)		(*(volatile unsigned char *)(p))
+
+static inline void putc(int c)
+{
+	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+	      __raw_readb(IO_UART + 0x18) & 0x08)
+		barrier();
+
+	__raw_writeb(c, IO_UART + 0x00);
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
+	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
+	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
new file mode 100644
index 000000000000..85f0abbf15f1
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)