Merge branch 'master' into for-next

Sync with Linus tree to have 157550ff ("mtd: add GPMI-NAND driver
in the config and Makefile") as I have patch depending on that one.

41 files changed, 359 insertions, 877 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c0deacae778d..32d837d8eab9 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -192,6 +192,16 @@ config DA850_UI_RMII
 
 endchoice
 
+config DA850_WL12XX
+	bool "AM18x wl1271 daughter board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The wl1271 daughter card for AM18x EVMs is a combo wireless
+	  connectivity add-on card, based on the LS Research TiWi module with
+	  Texas Instruments' wl1271 solution.
+	  Say Y if you want to use a wl1271 expansion card connected to the
+	  AM18x EVM.
+
 config GPIO_PCA953X
 	default MACH_DAVINCI_DA850_EVM
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1ca2bb3..495e31306fc0 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o dma.o usb.o common.o sram.o aemif.o
+			   dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
@@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += gpio-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd78684868..11c3db985285 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -377,7 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
 	.ecc_mode	= NAND_ECC_HW,
 	.ecc_bits	= 4,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.bbt_td		= &da830_evm_nand_bbt_main_descr,
 	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
 	.timing         = &da830_evm_nandflash_timing,
@@ -676,7 +676,7 @@ static void __init da830_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d51407cd7..1d7d24995226 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -31,6 +31,8 @@
 #include <linux/input/tps6507x-ts.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/delay.h>
+#include <linux/wl12xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,6 +51,9 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#define DA850_WLAN_EN			GPIO_TO_PIN(6, 9)
+#define DA850_WLAN_IRQ			GPIO_TO_PIN(6, 10)
+
 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
 
 static struct mtd_partition da850evm_spiflash_part[] = {
@@ -251,7 +256,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
 	.ecc_bits	= 4,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &da850_evm_nandflash_timing,
 };
 
@@ -1143,6 +1148,110 @@ static __init int da850_evm_init_cpufreq(void)
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#ifdef CONFIG_DA850_WL12XX
+
+static void wl12xx_set_power(int index, bool power_on)
+{
+	static bool power_state;
+
+	pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
+
+	if (power_on == power_state)
+		return;
+	power_state = power_on;
+
+	if (power_on) {
+		/* Power up sequence required for wl127x devices */
+		gpio_set_value(DA850_WLAN_EN, 1);
+		usleep_range(15000, 15000);
+		gpio_set_value(DA850_WLAN_EN, 0);
+		usleep_range(1000, 1000);
+		gpio_set_value(DA850_WLAN_EN, 1);
+		msleep(70);
+	} else {
+		gpio_set_value(DA850_WLAN_EN, 0);
+	}
+}
+
+static struct davinci_mmc_config da850_wl12xx_mmc_config = {
+	.set_power	= wl12xx_set_power,
+	.wires		= 4,
+	.max_freq	= 25000000,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
+			  MMC_CAP_POWER_OFF_CARD,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static const short da850_wl12xx_pins[] __initconst = {
+	DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
+	DA850_GPIO6_9, DA850_GPIO6_10,
+	-1
+};
+
+static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
+	.irq			= -1,
+	.board_ref_clock	= WL12XX_REFCLOCK_38,
+	.platform_quirks	= WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
+};
+
+static __init int da850_wl12xx_init(void)
+{
+	int ret;
+
+	ret = davinci_cfg_reg_list(da850_wl12xx_pins);
+	if (ret) {
+		pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
+		goto exit;
+	}
+
+	ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
+	if (ret) {
+		pr_err("wl12xx/mmc registration failed: %d\n", ret);
+		goto exit;
+	}
+
+	ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
+	if (ret) {
+		pr_err("Could not request wl12xx enable gpio: %d\n", ret);
+		goto exit;
+	}
+
+	ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
+	if (ret) {
+		pr_err("Could not request wl12xx irq gpio: %d\n", ret);
+		goto free_wlan_en;
+	}
+
+	da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
+
+	ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
+	if (ret) {
+		pr_err("Could not set wl12xx data: %d\n", ret);
+		goto free_wlan_irq;
+	}
+
+	return 0;
+
+free_wlan_irq:
+	gpio_free(DA850_WLAN_IRQ);
+
+free_wlan_en:
+	gpio_free(DA850_WLAN_EN);
+
+exit:
+	return ret;
+}
+
+#else /* CONFIG_DA850_WL12XX */
+
+static __init int da850_wl12xx_init(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_DA850_WL12XX */
+
 #define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
 
 static __init void da850_evm_init(void)
@@ -1197,6 +1306,11 @@ static __init void da850_evm_init(void)
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 registration failed:"
 					" %d\n", ret);
+
+		ret = da850_wl12xx_init();
+		if (ret)
+			pr_warning("da850_evm_init: wl12xx initialization"
+				   " failed: %d\n", ret);
 	}
 
 	davinci_serial_init(&da850_evm_uart_config);
@@ -1291,7 +1405,7 @@ static void __init da850_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd67408..4e0e707c313d 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -77,7 +77,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
-	.options		= NAND_USE_FLASH_BBT,
+	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };
 
@@ -351,7 +351,7 @@ static __init void dm355_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284ca7fd6..ff2d2413279a 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -74,7 +74,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW_SYNDROME,
-	.options		= NAND_USE_FLASH_BBT,
+	.bbt_options		= NAND_BBT_USE_FLASH,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -270,7 +270,7 @@ static __init void dm355_leopard_init(void)
 }
 
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f214d4f0..1918ae711428 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -139,7 +139,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
-	.options		= NAND_USE_FLASH_BBT,
+	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };
 
@@ -612,7 +612,7 @@ static __init void dm365_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.boot_params	= (0x80000100),
+	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a191e03..0cf8abf78d33 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -23,6 +23,7 @@
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
+#include <linux/export.h>
 
 #include <media/tvp514x.h>
 
@@ -150,7 +151,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,
 };
 
@@ -712,7 +713,7 @@ static __init void davinci_evm_init(void)
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a3146fd35..e574d7f837a8 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -31,6 +31,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
+#include <linux/export.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -792,7 +793,7 @@ static __init void evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
@@ -801,7 +802,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226627ad..3cfff555e8f2 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -396,7 +396,8 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
 	.parts		= mityomapl138_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+	.bbt_options	= NAND_BBT_USE_FLASH,
+	.options	= NAND_BUSWIDTH_16,
 	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
 };
 
@@ -566,7 +567,7 @@ static void __init mityomapl138_map_io(void)
 }
 
 MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a80028ba3..e5f231aefee4 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -87,7 +87,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 };
 
 static struct resource davinci_ntosd2_nandflash_resource[] = {
@@ -272,7 +272,7 @@ static __init void davinci_ntosd2_init(void)
 
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a11421..c6701e4a795c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@ static void __init omapl138_hawk_map_io(void)
 }
 
 MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c0a089..5dd4da9d2308 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@ static __init void davinci_sffsdr_init(void)
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
-	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 782892065682..f69e40a29e02 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -144,7 +144,7 @@ static struct davinci_nand_pdata nand_config = {
 	.parts		= nand_partitions,
 	.nr_parts	= ARRAY_SIZE(nand_partitions),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.ecc_bits	= 1,
 };
 
@@ -277,7 +277,7 @@ console_initcall(tnetv107x_evm_console_init);
 #endif
 
 MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.boot_params	= (TNETV107X_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= tnetv107x_init,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c
index ba8b12b2913b..f2232ca6d070 100644
--- a/arch/arm/mach-davinci/cdce949.c
+++ b/arch/arm/mach-davinci/cdce949.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
 
 #include <mach/clock.h>
 #include <mach/cdce949.h>
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d2557394235..865ffe5899ac 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/etherdevice.h>
 #include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
@@ -86,6 +87,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 		iotable_init(davinci_soc_info.io_desc,
 				davinci_soc_info.io_desc_num);
 
+	init_consistent_dma_size(14 << 20);
+
 	/*
 	 * Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 41669ecc1f91..5bba7070f271 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <mach/cpufreq.h>
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index bd59f31b8a95..a30c7c5a6d83 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -16,10 +16,11 @@
 #include <linux/platform_device.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
 #include <asm/proc-fns.h>
 
 #include <mach/cpuidle.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
@@ -78,9 +79,11 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
 
 /* Actual code that puts the SoC in different idle states */
 static int davinci_enter_idle(struct cpuidle_device *dev,
-						struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+						int index)
 {
-	struct davinci_ops *ops = cpuidle_get_statedata(state);
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+	struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
 	struct timeval before, after;
 	int idle_time;
 
@@ -98,13 +101,17 @@ static int davinci_enter_idle(struct cpuidle_device *dev,
 	local_irq_enable();
 	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
 			(after.tv_usec - before.tv_usec);
-	return idle_time;
+
+	dev->last_residency = idle_time;
+
+	return index;
 }
 
 static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct cpuidle_device *device;
+	struct cpuidle_driver *driver = &davinci_idle_driver;
 	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
 
 	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
@@ -116,32 +123,33 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 
 	ddr2_reg_base = pdata->ddr2_ctlr_base;
 
-	ret = cpuidle_register_driver(&davinci_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register driver\n");
-		return ret;
-	}
-
 	/* Wait for interrupt state */
-	device->states[0].enter = davinci_enter_idle;
-	device->states[0].exit_latency = 1;
-	device->states[0].target_residency = 10000;
-	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[0].name, "WFI");
-	strcpy(device->states[0].desc, "Wait for interrupt");
+	driver->states[0].enter = davinci_enter_idle;
+	driver->states[0].exit_latency = 1;
+	driver->states[0].target_residency = 10000;
+	driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[0].name, "WFI");
+	strcpy(driver->states[0].desc, "Wait for interrupt");
 
 	/* Wait for interrupt and DDR self refresh state */
-	device->states[1].enter = davinci_enter_idle;
-	device->states[1].exit_latency = 10;
-	device->states[1].target_residency = 10000;
-	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[1].name, "DDR SR");
-	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+	driver->states[1].enter = davinci_enter_idle;
+	driver->states[1].exit_latency = 10;
+	driver->states[1].target_residency = 10000;
+	driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[1].name, "DDR SR");
+	strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");
 	if (pdata->ddr2_pdown)
 		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
-	cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
+	cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
 
 	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+	driver->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+
+	ret = cpuidle_register_driver(&davinci_idle_driver);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register driver\n");
+		return ret;
+	}
 
 	ret = cpuidle_register_device(device);
 	if (ret) {
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 2ed2f822fc40..a6bf5dcaef13 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,6 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
@@ -19,7 +20,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 935dbed5c541..b047f8702278 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,6 +11,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
@@ -27,7 +28,7 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -535,6 +536,13 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* MMC/SD1 function */
+	MUX_CFG(DA850, MMCSD1_DAT_0,	18,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_1,	19,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_2,	19,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_3,	19,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_CLK,	18,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_CMD,	18,	16,	15,	2,	false)
 	/* EMIF2.5/EMIFA function */
 	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
 	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
@@ -593,6 +601,8 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, GPIO3_13,	7,	8,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
+	MUX_CFG(DA850, GPIO6_9,		13,	24,	15,	8,	false)
+	MUX_CFG(DA850, GPIO6_10,	13,	20,	15,	8,	false)
 	MUX_CFG(DA850, GPIO6_13,	13,	8,	15,	8,	false)
 	MUX_CFG(DA850, RTC_ALARM,	0,	28,	15,	2,	false)
 #endif
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2f7e719636f1..68def7188868 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -136,6 +136,7 @@ static struct edma_soc_info da830_edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= da8xx_queue_tc_mapping,
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
@@ -151,6 +152,7 @@ static struct edma_soc_info da850_edma_cc_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+		.default_queue		= EVENTQ_1,
 	},
 	{
 		.n_channel		= 32,
@@ -160,6 +162,7 @@ static struct edma_soc_info da850_edma_cc_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= da850_queue_tc_mapping,
 		.queue_priority_mapping	= da850_queue_priority_mapping,
+		.default_queue		= EVENTQ_0,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 6162cae7f868..29b17f7d3a5f 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -80,6 +80,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= edma_tc_mapping,
 	.queue_priority_mapping	= edma_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9c9378..fe520d4167a2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,7 +13,6 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 
@@ -30,6 +29,7 @@
 #include <mach/common.h>
 #include <mach/asp.h>
 #include <mach/spi.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -591,6 +591,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 4604e72d7d99..679e168dce34 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,7 +17,6 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach/map.h>
@@ -34,7 +33,7 @@
 #include <mach/asp.h>
 #include <mach/keyscan.h>
 #include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c2716293..3470983aa343 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,7 +12,6 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 
@@ -26,6 +25,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -514,6 +514,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e711a2b8..0b68ed534f8e 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 
@@ -27,6 +26,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -555,6 +555,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= dm646x_queue_tc_mapping,
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 6b9669869c46..da90103a313d 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -1435,12 +1435,11 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail1;
 		}
 
-		edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
 		if (!edma_cc[j]) {
 			status = -ENOMEM;
 			goto fail1;
 		}
-		memset(edma_cc[j], 0, sizeof(struct edma));
 
 		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
 							EDMA_MAX_DMACH);
@@ -1450,8 +1449,6 @@ static int __init edma_probe(struct platform_device *pdev)
 							EDMA_MAX_CC);
 
 		edma_cc[j]->default_queue = info[j]->default_queue;
-		if (!edma_cc[j]->default_queue)
-			edma_cc[j]->default_queue = EVENTQ_1;
 
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c
deleted file mode 100644
index 3fa3e2867e19..000000000000
--- a/arch/arm/mach-davinci/gpio-tnetv107x.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Texas Instruments TNETV107X GPIO Controller
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/tnetv107x.h>
-
-struct tnetv107x_gpio_regs {
-	u32	idver;
-	u32	data_in[3];
-	u32	data_out[3];
-	u32	direction[3];
-	u32	enable[3];
-};
-
-#define gpio_reg_index(gpio)	((gpio) >> 5)
-#define gpio_reg_bit(gpio)	BIT((gpio) & 0x1f)
-
-#define gpio_reg_rmw(reg, mask, val)	\
-	__raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
-
-#define gpio_reg_set_bit(reg, gpio)	\
-	gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
-
-#define gpio_reg_clear_bit(reg, gpio)	\
-	gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
-
-#define gpio_reg_get_bit(reg, gpio)	\
-	(__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
-
-#define chip2controller(chip)		\
-	container_of(chip, struct davinci_gpio_controller, chip)
-
-#define TNETV107X_GPIO_CTLRS	DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
-
-static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
-
-static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	gpio_reg_set_bit(regs->enable, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-
-	return 0;
-}
-
-static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	gpio_reg_clear_bit(regs->enable, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-}
-
-static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	gpio_reg_set_bit(regs->direction, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-
-	return 0;
-}
-
-static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
-		unsigned offset, int value)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	if (value)
-		gpio_reg_set_bit(regs->data_out, gpio);
-	else
-		gpio_reg_clear_bit(regs->data_out, gpio);
-
-	gpio_reg_clear_bit(regs->direction, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-
-	return 0;
-}
-
-static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	int ret;
-
-	ret = gpio_reg_get_bit(regs->data_in, gpio);
-
-	return ret ? 1 : 0;
-}
-
-static void tnetv107x_gpio_set(struct gpio_chip *chip,
-		unsigned offset, int value)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	if (value)
-		gpio_reg_set_bit(regs->data_out, gpio);
-	else
-		gpio_reg_clear_bit(regs->data_out, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-}
-
-static int __init tnetv107x_gpio_setup(void)
-{
-	int i, base;
-	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct tnetv107x_gpio_regs *regs;
-	struct davinci_gpio_controller *ctlr;
-
-	if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
-		return 0;
-
-	ngpio = soc_info->gpio_num;
-	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
-		return -EINVAL;
-	}
-
-	if (WARN_ON(TNETV107X_N_GPIO < ngpio))
-		ngpio = TNETV107X_N_GPIO;
-
-	regs = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!regs))
-		return -EINVAL;
-
-	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		ctlr = &chips[i];
-
-		ctlr->chip.label	= "tnetv107x";
-		ctlr->chip.can_sleep	= 0;
-		ctlr->chip.base		= base;
-		ctlr->chip.ngpio	= ngpio - base;
-		if (ctlr->chip.ngpio > 32)
-			ctlr->chip.ngpio = 32;
-
-		ctlr->chip.request		= tnetv107x_gpio_request;
-		ctlr->chip.free			= tnetv107x_gpio_free;
-		ctlr->chip.direction_input	= tnetv107x_gpio_dir_in;
-		ctlr->chip.get			= tnetv107x_gpio_get;
-		ctlr->chip.direction_output	= tnetv107x_gpio_dir_out;
-		ctlr->chip.set			= tnetv107x_gpio_set;
-
-		spin_lock_init(&ctlr->lock);
-
-		ctlr->regs	= regs;
-		ctlr->set_data	= &regs->data_out[i];
-		ctlr->clr_data	= &regs->data_out[i];
-		ctlr->in_data	= &regs->data_in[i];
-
-		gpiochip_add(&ctlr->chip);
-	}
-
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-	return 0;
-}
-pure_initcall(tnetv107x_gpio_setup);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
deleted file mode 100644
index cafbe13a82a5..000000000000
--- a/arch/arm/mach-davinci/gpio.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006-2007 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-
-#include <asm/mach/irq.h>
-
-struct davinci_gpio_regs {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
-};
-
-#define chip2controller(chip)	\
-	container_of(chip, struct davinci_gpio_controller, chip)
-
-static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static void __iomem *gpio_base;
-
-static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
-{
-	void __iomem *ptr;
-
-	if (gpio < 32 * 1)
-		ptr = gpio_base + 0x10;
-	else if (gpio < 32 * 2)
-		ptr = gpio_base + 0x38;
-	else if (gpio < 32 * 3)
-		ptr = gpio_base + 0x60;
-	else if (gpio < 32 * 4)
-		ptr = gpio_base + 0x88;
-	else if (gpio < 32 * 5)
-		ptr = gpio_base + 0xb0;
-	else
-		ptr = NULL;
-	return ptr;
-}
-
-static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
-{
-	struct davinci_gpio_regs __iomem *g;
-
-	g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
-
-	return g;
-}
-
-static int __init davinci_gpio_irq_setup(void);
-
-/*--------------------------------------------------------------------------*/
-
-/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
-static inline int __davinci_direction(struct gpio_chip *chip,
-			unsigned offset, bool out, int value)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-	unsigned long flags;
-	u32 temp;
-	u32 mask = 1 << offset;
-
-	spin_lock_irqsave(&d->lock, flags);
-	temp = __raw_readl(&g->dir);
-	if (out) {
-		temp &= ~mask;
-		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
-	} else {
-		temp |= mask;
-	}
-	__raw_writel(temp, &g->dir);
-	spin_unlock_irqrestore(&d->lock, flags);
-
-	return 0;
-}
-
-static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	return __davinci_direction(chip, offset, false, 0);
-}
-
-static int
-davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
-	return __davinci_direction(chip, offset, true, value);
-}
-
-/*
- * Read the pin's value (works even if it's set up as output);
- * returns zero/nonzero.
- *
- * Note that changes are synched to the GPIO clock, so reading values back
- * right after you've set them may give old values.
- */
-static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-
-	return (1 << offset) & __raw_readl(&g->in_data);
-}
-
-/*
- * Assuming the pin is muxed as a gpio output, set its output value.
- */
-static void
-davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-
-	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
-}
-
-static int __init davinci_gpio_setup(void)
-{
-	int i, base;
-	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs *regs;
-
-	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
-		return 0;
-
-	/*
-	 * The gpio banks conceptually expose a segmented bitmap,
-	 * and "ngpio" is one more than the largest zero-based
-	 * bit index that's valid.
-	 */
-	ngpio = soc_info->gpio_num;
-	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
-		return -EINVAL;
-	}
-
-	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
-		ngpio = DAVINCI_N_GPIO;
-
-	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!gpio_base))
-		return -ENOMEM;
-
-	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		chips[i].chip.label = "DaVinci";
-
-		chips[i].chip.direction_input = davinci_direction_in;
-		chips[i].chip.get = davinci_gpio_get;
-		chips[i].chip.direction_output = davinci_direction_out;
-		chips[i].chip.set = davinci_gpio_set;
-
-		chips[i].chip.base = base;
-		chips[i].chip.ngpio = ngpio - base;
-		if (chips[i].chip.ngpio > 32)
-			chips[i].chip.ngpio = 32;
-
-		spin_lock_init(&chips[i].lock);
-
-		regs = gpio2regs(base);
-		chips[i].regs = regs;
-		chips[i].set_data = &regs->set_data;
-		chips[i].clr_data = &regs->clr_data;
-		chips[i].in_data = &regs->in_data;
-
-		gpiochip_add(&chips[i].chip);
-	}
-
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-
-	davinci_gpio_irq_setup();
-	return 0;
-}
-pure_initcall(davinci_gpio_setup);
-
-/*--------------------------------------------------------------------------*/
-/*
- * We expect irqs will normally be set up as input pins, but they can also be
- * used as output pins ... which is convenient for testing.
- *
- * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead.
- *
- * All those INTC hookups (direct, plus several IRQ banks) can also
- * serve as EDMA event triggers.
- */
-
-static void gpio_irq_disable(struct irq_data *d)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	__raw_writel(mask, &g->clr_falling);
-	__raw_writel(mask, &g->clr_rising);
-}
-
-static void gpio_irq_enable(struct irq_data *d)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-	unsigned status = irqd_get_trigger_type(d);
-
-	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-	if (!status)
-		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-
-	if (status & IRQ_TYPE_EDGE_FALLING)
-		__raw_writel(mask, &g->set_falling);
-	if (status & IRQ_TYPE_EDGE_RISING)
-		__raw_writel(mask, &g->set_rising);
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned trigger)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		return -EINVAL;
-
-	return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_enable	= gpio_irq_enable,
-	.irq_disable	= gpio_irq_disable,
-	.irq_set_type	= gpio_irq_type,
-	.flags		= IRQCHIP_SET_TYPE_MASKED,
-};
-
-static void
-gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
-	struct davinci_gpio_regs __iomem *g;
-	u32 mask = 0xffff;
-	struct davinci_gpio_controller *d;
-
-	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
-	g = (struct davinci_gpio_regs __iomem *)d->regs;
-
-	/* we only care about one bank */
-	if (irq & 1)
-		mask <<= 16;
-
-	/* temporarily mask (level sensitive) parent IRQ */
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-	while (1) {
-		u32		status;
-		int		n;
-		int		res;
-
-		/* ack any irqs */
-		status = __raw_readl(&g->intstat) & mask;
-		if (!status)
-			break;
-		__raw_writel(status, &g->intstat);
-
-		/* now demux them to the right lowlevel handler */
-		n = d->irq_base;
-		if (irq & 1) {
-			n += 16;
-			status >>= 16;
-		}
-
-		while (status) {
-			res = ffs(status);
-			n += res;
-			generic_handle_irq(n - 1);
-			status >>= res;
-		}
-	}
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-	/* now it may re-trigger */
-}
-
-static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-
-	if (d->irq_base >= 0)
-		return d->irq_base + offset;
-	else
-		return -ENODEV;
-}
-
-static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	/* NOTE:  we assume for now that only irqs in the first gpio_chip
-	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
-	 */
-	if (offset < soc_info->gpio_unbanked)
-		return soc_info->gpio_irq + offset;
-	else
-		return -ENODEV;
-}
-
-static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		return -EINVAL;
-
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
-
-	return 0;
-}
-
-/*
- * NOTE:  for suspend/resume, probably best to make a platform_device with
- * suspend_late/resume_resume calls hooking into results of the set_wake()
- * calls ... so if no gpios are wakeup events the clock can be disabled,
- * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * (dm6446) can be set appropriately for GPIOV33 pins.
- */
-
-static int __init davinci_gpio_irq_setup(void)
-{
-	unsigned	gpio, irq, bank;
-	struct clk	*clk;
-	u32		binten = 0;
-	unsigned	ngpio, bank_irq;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs	__iomem *g;
-
-	ngpio = soc_info->gpio_num;
-
-	bank_irq = soc_info->gpio_irq;
-	if (bank_irq == 0) {
-		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
-		return -EINVAL;
-	}
-
-	clk = clk_get(NULL, "gpio");
-	if (IS_ERR(clk)) {
-		printk(KERN_ERR "Error %ld getting gpio clock?\n",
-		       PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
-	clk_enable(clk);
-
-	/* Arrange gpio_to_irq() support, handling either direct IRQs or
-	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
-	 * IRQs, while the others use banked IRQs, would need some setup
-	 * tweaks to recognize hardware which can do that.
-	 */
-	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
-		chips[bank].chip.to_irq = gpio_to_irq_banked;
-		chips[bank].irq_base = soc_info->gpio_unbanked
-			? -EINVAL
-			: (soc_info->intc_irq_num + gpio);
-	}
-
-	/*
-	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
-	 * controller only handling trigger modes.  We currently assume no
-	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
-	 */
-	if (soc_info->gpio_unbanked) {
-		static struct irq_chip gpio_irqchip_unbanked;
-
-		/* pass "bank 0" GPIO IRQs to AINTC */
-		chips[0].chip.to_irq = gpio_to_irq_unbanked;
-		binten = BIT(0);
-
-		/* AINTC handles mask/unmask; GPIO handles triggering */
-		irq = bank_irq;
-		gpio_irqchip_unbanked = *irq_get_chip(irq);
-		gpio_irqchip_unbanked.name = "GPIO-AINTC";
-		gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
-
-		/* default trigger: both edges */
-		g = gpio2regs(0);
-		__raw_writel(~0, &g->set_falling);
-		__raw_writel(~0, &g->set_rising);
-
-		/* set the direct IRQs up to use that irqchip */
-		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
-			irq_set_chip(irq, &gpio_irqchip_unbanked);
-			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
-			irq_set_chip_data(irq, (__force void *)g);
-			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
-		}
-
-		goto done;
-	}
-
-	/*
-	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
-	 * then chain through our own handler.
-	 */
-	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
-			gpio < ngpio;
-			bank++, bank_irq++) {
-		unsigned		i;
-
-		/* disabled by default, enabled only as needed */
-		g = gpio2regs(gpio);
-		__raw_writel(~0, &g->clr_falling);
-		__raw_writel(~0, &g->clr_rising);
-
-		/* set up all irqs in this bank */
-		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-
-		/*
-		 * Each chip handles 32 gpios, and each irq bank consists of 16
-		 * gpio irqs. Pass the irq bank's corresponding controller to
-		 * the chained irq handler.
-		 */
-		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
-
-		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
-			irq_set_chip(irq, &gpio_irqchip);
-			irq_set_chip_data(irq, (__force void *)g);
-			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
-			irq_set_handler(irq, handle_simple_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-
-		binten |= BIT(bank);
-	}
-
-done:
-	/* BINTEN -- per-bank interrupt enable. genirq would also let these
-	 * bits be set/cleared dynamically.
-	 */
-	__raw_writel(binten, gpio_base + 0x08);
-
-	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
-
-	return 0;
-}
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h
new file mode 100644
index 000000000000..c19e047d0e6a
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/ddr2.h
@@ -0,0 +1,4 @@
+#define DDR2_SDRCR_OFFSET	0xc
+#define DDR2_SRPD_BIT		(1 << 23)
+#define DDR2_MCLKSTOPEN_BIT	(1 << 30)
+#define DDR2_LPMODEN_BIT	(1 << 31)
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4f6235..cf94552d5274 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -18,56 +18,50 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <mach/serial.h>
 
 #define UART_SHIFT	2
 
-#define davinci_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
 		.pushsection .data
 davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
 		.popsection
 
-		.macro addruart, rp, rv
+		.macro addruart, rp, rv, tmp
 
 		/* Use davinci_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =davinci_uart_v2p(davinci_uart_phys)
-		ldrne	\rp, =davinci_uart_phys
-		add	\rv, \rp, #4		@ davinci_uart_virt
-		ldr	\rp, [\rp, #0]
-		ldr	\rv, [\rv, #0]
+10:		adr	\rp, 99f		@ get effective addr of 99f
+		ldr	\rv, [\rp]		@ get absolute addr of 99f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ davinci_uart_phys
+		ldr	\rv, [\tmp, #4]		@ davinci_uart_virt
 		cmp	\rp, #0			@ is port configured?
 		cmpne	\rv, #0
-		bne	99f			@ already configured
+		bne	100f			@ already configured
 
 		/* Check the debug UART address set in uncompress.h */
-		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
+		and	\rp, pc, #0xff000000
+		ldr	\rv, =DAVINCI_UART_INFO_OFS
+		add	\rp, \rp, \rv
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\rv, =davinci_uart_v2p(davinci_uart_phys)
-		ldrne	\rv, =davinci_uart_phys
-		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
-		ldr	\rp, [\rp, #0]
-		str	\rp, [\rv]
+		ldr	\rv, [\rp, #0]
+		str	\rv, [\tmp, #0]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\rv, =davinci_uart_v2p(davinci_uart_virt)
-		ldrne	\rv, =davinci_uart_virt
-		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
-		ldr	\rp, [\rp, #4]
-		str	\rp, [\rv]
+		ldr	\rv, [\rp, #4]
+		str	\rv, [\tmp, #4]
 
 		b	10b
-99:
+
+		.align
+99:		.word	.
+		.word	davinci_uart_phys
+		.ltorg
+
+100:
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
new file mode 100644
index 000000000000..1fdd1fd35448
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -0,0 +1,91 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_DAVINCI_GPIO_H
+#define	__DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+	GPIO_TYPE_DAVINCI = 0,
+	GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
+ * and maybe for later updates, code may write GPIO(N).  These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+	int index = gpio / 32;
+
+	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+		return NULL;
+
+	return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbece126c2bf..960e9de47e1e 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -13,80 +13,12 @@
 #ifndef	__DAVINCI_GPIO_H
 #define	__DAVINCI_GPIO_H
 
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
 #include <asm-generic/gpio.h>
 
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
+#define __ARM_GPIOLIB_COMPLEX
 
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
 
 /*
  * The get/set/clear functions will inline when called with constant
@@ -147,11 +79,6 @@ static inline int gpio_cansleep(unsigned gpio)
 		return __gpio_cansleep(gpio);
 }
 
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* don't support the reverse mapping */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
deleted file mode 100644
index 78731944a70c..000000000000
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE	0x80000000
-#define DA8XX_DDR_BASE		0xc0000000
-
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
-#else
-#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
-#endif
-
-#define DDR2_SDRCR_OFFSET	0xc
-#define DDR2_SRPD_BIT		BIT(23)
-#define DDR2_MCLKSTOPEN_BIT	BIT(30)
-#define DDR2_LPMODEN_BIT	BIT(31)
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index d4f1e9675069..5ba6b22ce338 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -12,6 +12,9 @@ struct davinci_mmc_config {
 	/* get_cd()/get_wp() may sleep */
 	int	(*get_cd)(int module);
 	int	(*get_ro)(int module);
+
+	void	(*set_power)(int module, bool on);
+
 	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
 	u8	wires;
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 5d4e0fed828a..a7e92fca32e6 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -857,6 +857,14 @@ enum davinci_da850_index {
 	DA850_MMCSD0_CLK,
 	DA850_MMCSD0_CMD,
 
+	/* MMC/SD1 function */
+	DA850_MMCSD1_DAT_0,
+	DA850_MMCSD1_DAT_1,
+	DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3,
+	DA850_MMCSD1_CLK,
+	DA850_MMCSD1_CMD,
+
 	/* EMIF2.5/EMIFA function */
 	DA850_EMA_D_7,
 	DA850_EMA_D_6,
@@ -916,6 +924,8 @@ enum davinci_da850_index {
 	DA850_GPIO3_13,
 	DA850_GPIO4_0,
 	DA850_GPIO4_1,
+	DA850_GPIO6_9,
+	DA850_GPIO6_10,
 	DA850_GPIO6_13,
 	DA850_RTC_ALARM,
 };
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index 025151049f05..1cf555aef896 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -74,8 +74,10 @@ struct davinci_nand_pdata {		/* platform_data */
 	nand_ecc_modes_t	ecc_mode;
 	u8			ecc_bits;
 
-	/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
+	/* e.g. NAND_BUSWIDTH_16 */
 	unsigned		options;
+	/* e.g. NAND_BBT_USE_FLASH */
+	unsigned		bbt_options;
 
 	/* Main and mirror bbt descriptor overrides */
 	struct nand_bbt_descr	*bbt_td;
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index c9e6ce185a66..e347d88fef91 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -21,8 +21,9 @@
  * macros in debug-macro.S.
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
+ * We define it as a relative offset from start of usable RAM.
  */
-#define DAVINCI_UART_INFO	(PLAT_PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO_OFS	0x3ff8
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 78d80683cdc2..9dc7cf9664fe 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,7 +43,12 @@ static inline void flush(void)
 
 static inline void set_uart_info(u32 phys, void * __iomem virt)
 {
-	u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+	/*
+	 * Get address of some.bss variable and round it down
+	 * a la CONFIG_AUTO_ZRELADDR.
+	 */
+	u32 ram_start = (u32)&uart & 0xf8000000;
+	u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
 
 	uart = (u32 *)phys;
 	uart_info[0] = phys;
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045a3ad1..d4e9316ecacb 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/psc.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 1b28fdd892a6..409bb869c7c7 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -12,6 +12,7 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -27,9 +28,9 @@
 #include <mach/psc.h>
 #include <mach/cp_intc.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"