Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

1 files changed, 38 insertions, 21 deletions

diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 71a46a348761..2e473fefd71e 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -68,7 +68,7 @@
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
+static struct plat_serial8250_port da8xx_serial0_pdata[] = {
 	{
 		.mapbase	= DA8XX_UART0_BASE,
 		.irq		= IRQ_DA8XX_UARTINT0,
@@ -78,6 +78,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port da8xx_serial1_pdata[] = {
+	{
 		.mapbase	= DA8XX_UART1_BASE,
 		.irq		= IRQ_DA8XX_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -86,6 +91,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port da8xx_serial2_pdata[] = {
+	{
 		.mapbase	= DA8XX_UART2_BASE,
 		.irq		= IRQ_DA8XX_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -95,15 +105,33 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 	},
 	{
 		.flags	= 0,
-	},
+	}
 };
 
-struct platform_device da8xx_serial_device = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data	= da8xx_serial_pdata,
+struct platform_device da8xx_serial_device[] = {
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM,
+		.dev	= {
+			.platform_data	= da8xx_serial0_pdata,
+		}
+	},
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM1,
+		.dev	= {
+			.platform_data	= da8xx_serial1_pdata,
+		}
+	},
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM2,
+		.dev	= {
+			.platform_data	= da8xx_serial2_pdata,
+		}
 	},
+	{
+	}
 };
 
 static s8 da8xx_queue_tc_mapping[][2] = {
@@ -453,12 +481,8 @@ int __init da8xx_register_emac(void)
 	ret = platform_device_register(&da8xx_mdio_device);
 	if (ret < 0)
 		return ret;
-	ret = platform_device_register(&da8xx_emac_device);
-	if (ret < 0)
-		return ret;
-	ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
-			    NULL, &da8xx_emac_device.dev);
-	return ret;
+
+	return platform_device_register(&da8xx_emac_device);
 }
 
 static struct resource da830_mcasp1_resources[] = {
@@ -828,14 +852,7 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
-	int ret;
-
-	ret = platform_device_register(&da8xx_rtc_device);
-	if (!ret)
-		/* Atleast on DA850, RTC is a wakeup source */
-		device_init_wakeup(&da8xx_rtc_device.dev, true);
-
-	return ret;
+	return platform_device_register(&da8xx_rtc_device);
 }
 
 static void __iomem *da8xx_ddr2_ctlr_base;