summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/gpio.c
diff options
context:
space:
mode:
authorAndrew Victor <andrew@sanpeople.com>2007-02-05 11:42:07 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-02-08 14:50:56 +0000
commit9d0412680e6c7b685ee466842047bcfb924d6dc5 (patch)
treec79300964ef1aca5d24571696f95e76b37c14679 /arch/arm/mach-at91/gpio.c
parenta93d48cc6019f84394b31d10c0d830a3b71696be (diff)
downloadblackbird-op-linux-9d0412680e6c7b685ee466842047bcfb924d6dc5.tar.gz
blackbird-op-linux-9d0412680e6c7b685ee466842047bcfb924d6dc5.zip
[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-at91/gpio.c')
-rw-r--r--arch/arm/mach-at91/gpio.c414
1 files changed, 414 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
new file mode 100644
index 000000000000..9b7495cd555d
--- /dev/null
+++ b/arch/arm/mach-at91/gpio.c
@@ -0,0 +1,414 @@
+/*
+ * linux/arch/arm/mach-at91/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static struct at91_gpio_bank *gpio;
+static int gpio_banks;
+
+
+static inline void __iomem *pin_to_controller(unsigned pin)
+{
+ void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
+
+ pin -= PIN_BASE;
+ pin /= 32;
+ if (likely(pin < gpio_banks))
+ return sys_base + gpio[pin].offset;
+
+ return NULL;
+}
+
+static inline unsigned pin_to_mask(unsigned pin)
+{
+ pin -= PIN_BASE;
+ return 1 << (pin % 32);
+}
+
+
+/*--------------------------------------------------------------------------*/
+
+/* Not all hardware capabilities are exposed through these calls; they
+ * only encapsulate the most common features and modes. (So if you
+ * want to change signals in groups, do it directly.)
+ *
+ * Bootloaders will usually handle some of the pin multiplexing setup.
+ * The intent is certainly that by the time Linux is fully booted, all
+ * pins should have been fully initialized. These setup calls should
+ * only be used by board setup routines, or possibly in driver probe().
+ *
+ * For bootloaders doing all that setup, these calls could be inlined
+ * as NOPs so Linux won't duplicate any setup code
+ */
+
+
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(mask, pio + PIO_ASR);
+ __raw_writel(mask, pio + PIO_PDR);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_A_periph);
+
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(mask, pio + PIO_BSR);
+ __raw_writel(mask, pio + PIO_PDR);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_B_periph);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(mask, pio + PIO_ODR);
+ __raw_writel(mask, pio + PIO_PER);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_input);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
+ * and configure it for an output.
+ */
+int __init_or_module at91_set_gpio_output(unsigned pin, int value)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + PIO_PUDR);
+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+ __raw_writel(mask, pio + PIO_OER);
+ __raw_writel(mask, pio + PIO_PER);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_output);
+
+
+/*
+ * enable/disable the glitch filter; mostly used with IRQ handling.
+ */
+int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+ __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_deglitch);
+
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_multi_drive);
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * assuming the pin is muxed as a gpio output, set its value.
+ */
+int at91_set_gpio_value(unsigned pin, int value)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_value);
+
+
+/*
+ * read the pin's value (works even if it's not muxed as a gpio).
+ */
+int at91_get_gpio_value(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+ u32 pdsr;
+
+ if (!pio)
+ return -EINVAL;
+ pdsr = __raw_readl(pio + PIO_PDSR);
+ return (pdsr & mask) != 0;
+}
+EXPORT_SYMBOL(at91_get_gpio_value);
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
+static int gpio_irq_set_wake(unsigned pin, unsigned state)
+{
+ unsigned mask = pin_to_mask(pin);
+ unsigned bank = (pin - PIN_BASE) / 32;
+
+ if (unlikely(bank >= MAX_GPIO_BANKS))
+ return -EINVAL;
+
+ if (state)
+ wakeups[bank] |= mask;
+ else
+ wakeups[bank] &= ~mask;
+
+ set_irq_wake(gpio[bank].id, state);
+
+ return 0;
+}
+
+void at91_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ u32 pio = gpio[i].offset;
+
+ backups[i] = at91_sys_read(pio + PIO_IMR);
+ at91_sys_write(pio + PIO_IDR, backups[i]);
+ at91_sys_write(pio + PIO_IER, wakeups[i]);
+
+ if (!wakeups[i])
+ clk_disable(gpio[i].clock);
+ else {
+#ifdef CONFIG_PM_DEBUG
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
+#endif
+ }
+ }
+}
+
+void at91_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ u32 pio = gpio[i].offset;
+
+ if (!wakeups[i])
+ clk_enable(gpio[i].clock);
+
+ at91_sys_write(pio + PIO_IDR, wakeups[i]);
+ at91_sys_write(pio + PIO_IER, backups[i]);
+ }
+}
+
+#else
+#define gpio_irq_set_wake NULL
+#endif
+
+
+/* Several AIC controller irqs are dispatched through this GPIO handler.
+ * To use any AT91_PIN_* as an externally triggered IRQ, first call
+ * at91_set_gpio_input() then maybe enable its glitch filter.
+ * Then just request_irq() with the pin ID; it works like any ARM IRQ
+ * handler, though it always triggers on rising and falling edges.
+ *
+ * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
+ * configuring them with at91_set_a_periph() or at91_set_b_periph().
+ * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
+ */
+
+static void gpio_irq_mask(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (pio)
+ __raw_writel(mask, pio + PIO_IDR);
+}
+
+static void gpio_irq_unmask(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (pio)
+ __raw_writel(mask, pio + PIO_IER);
+}
+
+static int gpio_irq_type(unsigned pin, unsigned type)
+{
+ return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .mask = gpio_irq_mask,
+ .unmask = gpio_irq_unmask,
+ .set_type = gpio_irq_type,
+ .set_wake = gpio_irq_set_wake,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ unsigned pin;
+ struct irq_desc *gpio;
+ void __iomem *pio;
+ u32 isr;
+
+ pio = get_irq_chip_data(irq);
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->ack(irq);
+ for (;;) {
+ /* reading ISR acks the pending (edge triggered) GPIO interrupt */
+ isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
+ if (!isr)
+ break;
+
+ pin = (unsigned) get_irq_data(irq);
+ gpio = &irq_desc[pin];
+
+ while (isr) {
+ if (isr & 1) {
+ if (unlikely(gpio->depth)) {
+ /*
+ * The core ARM interrupt handler lazily disables IRQs so
+ * another IRQ must be generated before it actually gets
+ * here to be disabled on the GPIO controller.
+ */
+ gpio_irq_mask(pin);
+ }
+ else
+ desc_handle_irq(pin, gpio);
+ }
+ pin++;
+ gpio++;
+ isr >>= 1;
+ }
+ }
+ desc->chip->unmask(irq);
+ /* now it may re-trigger */
+}
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Called from the processor-specific init to enable GPIO interrupt support.
+ */
+void __init at91_gpio_irq_setup(void)
+{
+ unsigned pioc, pin;
+
+ for (pioc = 0, pin = PIN_BASE;
+ pioc < gpio_banks;
+ pioc++) {
+ void __iomem *controller;
+ unsigned id = gpio[pioc].id;
+ unsigned i;
+
+ clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
+
+ controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
+ __raw_writel(~0, controller + PIO_IDR);
+
+ set_irq_data(id, (void *) pin);
+ set_irq_chip_data(id, controller);
+
+ for (i = 0; i < 32; i++, pin++) {
+ /*
+ * Can use the "simple" and not "edge" handler since it's
+ * shorter, and the AIC handles interupts sanely.
+ */
+ set_irq_chip(pin, &gpio_irqchip);
+ set_irq_handler(pin, handle_simple_irq);
+ set_irq_flags(pin, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(id, gpio_irq_handler);
+ }
+ pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+}
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
+{
+ BUG_ON(nr_banks > MAX_GPIO_BANKS);
+
+ gpio = data;
+ gpio_banks = nr_banks;
+}
OpenPOWER on IntegriCloud