summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/at91sam9261_devices.c
diff options
context:
space:
mode:
authorAndrew Victor <andrew@sanpeople.com>2007-11-19 13:47:20 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-11-26 19:40:47 +0000
commitf230d3f53d72d05bcb5666ab7e2eccd49c8b3a15 (patch)
tree0d06454868ca879f06a268de71beb0b1ba6a08d7 /arch/arm/mach-at91/at91sam9261_devices.c
parenta95c729b7484d2bbb9ab6beef4865641e73deb99 (diff)
downloadblackbird-op-linux-f230d3f53d72d05bcb5666ab7e2eccd49c8b3a15.tar.gz
blackbird-op-linux-f230d3f53d72d05bcb5666ab7e2eccd49c8b3a15.zip
[ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio
The AT91 I2C driver is currently marked as "broken" due to hardware issues. This patch enables AT91-based platforms to also use the bitbanged GPIO for I2C. This updates platform setup logic (setting up an i2c-gpio device using the same pins as the i2c-at91 device, unless only the BROKEN driver is enabled). Also make use of the new-style initialization of I2C devices using i2c_register_board_info(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-at91/at91sam9261_devices.c')
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c42
1 files changed, 39 insertions, 3 deletions
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3576595b4941..64979a9023c2 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,7 +14,9 @@
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
@@ -275,7 +277,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA7,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA8,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9261_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9261_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
@@ -297,7 +332,7 @@ static struct platform_device at91sam9261_twi_device = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
@@ -306,10 +341,11 @@ void __init at91_add_device_i2c(void)
at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA8, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9261_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
OpenPOWER on IntegriCloud