Merge nommu tree

1 files changed, 1 insertions, 206 deletions

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 53b6901f70a6..04b66a9328ef 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -102,49 +102,6 @@ ENTRY(stext)
 	adr	lr, __enable_mmu		@ return (PIC) address
 	add	pc, r10, #PROCINFO_INITFUNC
 
-	.type	__switch_data, %object
-__switch_data:
-	.long	__mmap_switched
-	.long	__data_loc			@ r4
-	.long	__data_start			@ r5
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	processor_id			@ r4
-	.long	__machine_arch_type		@ r5
-	.long	cr_alignment			@ r6
-	.long	init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on, and uses
- * absolute addresses; this is not position independent.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r9  = processor ID
- */
-	.type	__mmap_switched, %function
-__mmap_switched:
-	adr	r3, __switch_data + 4
-
-	ldmia	r3!, {r4, r5, r6, r7}
-	cmp	r4, r5				@ Copy data segment if needed
-1:	cmpne	r5, r6
-	ldrne	fp, [r4], #4
-	strne	fp, [r5], #4
-	bne	1b
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-1:	cmp	r6, r7
-	strcc	fp, [r6],#4
-	bcc	1b
-
-	ldmia	r3, {r4, r5, r6, sp}
-	str	r9, [r4]			@ Save processor ID
-	str	r1, [r5]			@ Save machine type
-	bic	r4, r0, #CR_A			@ Clear 'A' bit
-	stmia	r6, {r0, r4}			@ Save control register values
-	b	start_kernel
-
 #if defined(CONFIG_SMP)
 	.type   secondary_startup, #function
 ENTRY(secondary_startup)
@@ -367,166 +324,4 @@ __create_page_tables:
 	mov	pc, lr
 	.ltorg
 
-
-
-/*
- * Exception handling.  Something went wrong and we can't proceed.  We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
-	.type	__error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	bl	printascii
-	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant.\n"
-	.align
-#endif
-
-	.type	__error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
-	mov	r4, r1				@ preserve machine ID
-	adr	r0, str_a1
-	bl	printascii
-	mov	r0, r4
-	bl	printhex8
-	adr	r0, str_a2
-	bl	printascii
-	adr	r3, 3f
-	ldmia	r3, {r4, r5, r6}		@ get machine desc list
-	sub	r4, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r4			@ convert virt addresses to
-	add	r6, r6, r4			@ physical address space
-1:	ldr	r0, [r5, #MACHINFO_TYPE]	@ get machine type
-	bl	printhex8
-	mov	r0, #'\t'
-	bl	printch
-	ldr     r0, [r5, #MACHINFO_NAME]	@ get machine name
-	add	r0, r0, r4
-	bl	printascii
-	mov	r0, #'\n'
-	bl	printch
-	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
-	cmp	r5, r6
-	blo	1b
-	adr	r0, str_a3
-	bl	printascii
-	b	__error
-str_a1:	.asciz	"\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2:	.asciz	").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
-	.align
-#endif
-
-	.type	__error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
-	mov	r0, #0x02000000
-	mov	r3, #0x11
-	orr	r3, r3, r3, lsl #8
-	orr	r3, r3, r3, lsl #16
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-#endif
-1:	mov	r0, r0
-	b	1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list.  Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space).  We have to
- * calculate the offset.
- *
- *	r9 = cpuid
- * Returns:
- *	r3, r4, r6 corrupted
- *	r5 = proc_info pointer in physical address space
- *	r9 = cpuid (preserved)
- */
-	.type	__lookup_processor_type, %function
-__lookup_processor_type:
-	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
-	sub	r3, r3, r7			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldmia	r5, {r3, r4}			@ value, mask
-	and	r4, r4, r9			@ mask wanted bits
-	teq	r3, r4
-	beq	2f
-	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown processor
-2:	mov	pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
-	stmfd	sp!, {r4 - r7, r9, lr}
-	mov	r9, r0
-	bl	__lookup_processor_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r7, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
-	.long	__proc_info_begin
-	.long	__proc_info_end
-3:	.long	.
-	.long	__arch_info_begin
-	.long	__arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space).  We have to calculate the offset.
- *
- *  r1 = machine architecture number
- * Returns:
- *  r3, r4, r6 corrupted
- *  r5 = mach_info pointer in physical address space
- */
-	.type	__lookup_machine_type, %function
-__lookup_machine_type:
-	adr	r3, 3b
-	ldmia	r3, {r4, r5, r6}
-	sub	r3, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldr	r3, [r5, #MACHINFO_TYPE]	@ get machine type
-	teq	r3, r1				@ matches loader number?
-	beq	2f				@ found
-	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown machine
-2:	mov	pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
-	stmfd	sp!, {r4 - r6, lr}
-	mov	r1, r0
-	bl	__lookup_machine_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, pc}
+#include "head-common.S"