Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

1 files changed, 23 insertions, 133 deletions

diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 92ed254c175b..7c2bbc7f0be1 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -132,34 +132,10 @@
 #define SKPCR_DCLKEN	(1<<7)
 #define SKPCR_PWMCLKEN	(1<<8)
 
-/*
- * USB Host controller
- */
+/* USB Host controller */
 #define SA1111_USB		0x0400
 
 /*
- * Offsets from SA1111_USB_BASE
- */
-#define SA1111_USB_STATUS	0x0118
-#define SA1111_USB_RESET	0x011c
-#define SA1111_USB_IRQTEST	0x0120
-
-#define USB_RESET_FORCEIFRESET	(1 << 0)
-#define USB_RESET_FORCEHCRESET	(1 << 1)
-#define USB_RESET_CLKGENRESET	(1 << 2)
-#define USB_RESET_SIMSCALEDOWN	(1 << 3)
-#define USB_RESET_USBINTTEST	(1 << 4)
-#define USB_RESET_SLEEPSTBYEN	(1 << 5)
-#define USB_RESET_PWRSENSELOW	(1 << 6)
-#define USB_RESET_PWRCTRLLOW	(1 << 7)
-
-#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
-#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
-#define USB_STATUS_NIRQHCIM       (1 <<  9)
-#define USB_STATUS_NHCIMFCLR      (1 << 10)
-#define USB_STATUS_USBPWRSENSE    (1 << 11)
-
-/*
  * Serial Audio Controller
  *
  * Registers
@@ -327,22 +303,6 @@
  *    PC_SSR		GPIO Block C Sleep State
  */
 
-#define _PA_DDR		_SA1111( 0x1000 )
-#define _PA_DRR		_SA1111( 0x1004 )
-#define _PA_DWR		_SA1111( 0x1004 )
-#define _PA_SDR		_SA1111( 0x1008 )
-#define _PA_SSR		_SA1111( 0x100c )
-#define _PB_DDR		_SA1111( 0x1010 )
-#define _PB_DRR		_SA1111( 0x1014 )
-#define _PB_DWR		_SA1111( 0x1014 )
-#define _PB_SDR		_SA1111( 0x1018 )
-#define _PB_SSR		_SA1111( 0x101c )
-#define _PC_DDR		_SA1111( 0x1020 )
-#define _PC_DRR		_SA1111( 0x1024 )
-#define _PC_DWR		_SA1111( 0x1024 )
-#define _PC_SDR		_SA1111( 0x1028 )
-#define _PC_SSR		_SA1111( 0x102c )
-
 #define SA1111_GPIO	0x1000
 
 #define SA1111_GPIO_PADDR	(0x000)
@@ -425,106 +385,30 @@
 #define SA1111_WAKEPOL0		0x0034
 #define SA1111_WAKEPOL1		0x0038
 
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers
- *    PS2CR		Control Register
- *    PS2STAT		Status Register
- *    PS2DATA		Transmit/Receive Data register
- *    PS2CLKDIV		Clock Division Register
- *    PS2PRECNT		Clock Precount Register
- *    PS2TEST1		Test register 1
- *    PS2TEST2		Test register 2
- *    PS2TEST3		Test register 3
- *    PS2TEST4		Test register 4
- */
-
+/* PS/2 Trackpad and Mouse Interfaces */
 #define SA1111_KBD		0x0a00
 #define SA1111_MSE		0x0c00
 
-/*
- * These are offsets from the above bases.
- */
-#define SA1111_PS2CR		0x0000
-#define SA1111_PS2STAT		0x0004
-#define SA1111_PS2DATA		0x0008
-#define SA1111_PS2CLKDIV	0x000c
-#define SA1111_PS2PRECNT	0x0010
-
-#define PS2CR_ENA		0x08
-#define PS2CR_FKD		0x02
-#define PS2CR_FKC		0x01
-
-#define PS2STAT_STP		0x0100
-#define PS2STAT_TXE		0x0080
-#define PS2STAT_TXB		0x0040
-#define PS2STAT_RXF		0x0020
-#define PS2STAT_RXB		0x0010
-#define PS2STAT_ENA		0x0008
-#define PS2STAT_RXP		0x0004
-#define PS2STAT_KBD		0x0002
-#define PS2STAT_KBC		0x0001
+/* PCMCIA Interface */
+#define SA1111_PCMCIA		0x1600
 
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- */
-
-#define SA1111_PCMCIA	0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_PCCR	0x0000
-#define SA1111_PCSSR	0x0004
-#define SA1111_PCSR	0x0008
-
-#define PCSR_S0_READY	(1<<0)
-#define PCSR_S1_READY	(1<<1)
-#define PCSR_S0_DETECT	(1<<2)
-#define PCSR_S1_DETECT	(1<<3)
-#define PCSR_S0_VS1	(1<<4)
-#define PCSR_S0_VS2	(1<<5)
-#define PCSR_S1_VS1	(1<<6)
-#define PCSR_S1_VS2	(1<<7)
-#define PCSR_S0_WP	(1<<8)
-#define PCSR_S1_WP	(1<<9)
-#define PCSR_S0_BVD1	(1<<10)
-#define PCSR_S0_BVD2	(1<<11)
-#define PCSR_S1_BVD1	(1<<12)
-#define PCSR_S1_BVD2	(1<<13)
-
-#define PCCR_S0_RST	(1<<0)
-#define PCCR_S1_RST	(1<<1)
-#define PCCR_S0_FLT	(1<<2)
-#define PCCR_S1_FLT	(1<<3)
-#define PCCR_S0_PWAITEN	(1<<4)
-#define PCCR_S1_PWAITEN	(1<<5)
-#define PCCR_S0_PSE	(1<<6)
-#define PCCR_S1_PSE	(1<<7)
-
-#define PCSSR_S0_SLEEP	(1<<0)
-#define PCSSR_S1_SLEEP	(1<<1)
 
 
 
 
 extern struct bus_type sa1111_bus_type;
 
-#define SA1111_DEVID_SBI	0
-#define SA1111_DEVID_SK		1
-#define SA1111_DEVID_USB	2
-#define SA1111_DEVID_SAC	3
-#define SA1111_DEVID_SSP	4
-#define SA1111_DEVID_PS2	5
-#define SA1111_DEVID_GPIO	6
-#define SA1111_DEVID_INT	7
-#define SA1111_DEVID_PCMCIA	8
+#define SA1111_DEVID_SBI	(1 << 0)
+#define SA1111_DEVID_SK		(1 << 1)
+#define SA1111_DEVID_USB	(1 << 2)
+#define SA1111_DEVID_SAC	(1 << 3)
+#define SA1111_DEVID_SSP	(1 << 4)
+#define SA1111_DEVID_PS2	(3 << 5)
+#define SA1111_DEVID_PS2_KBD	(1 << 5)
+#define SA1111_DEVID_PS2_MSE	(1 << 6)
+#define SA1111_DEVID_GPIO	(1 << 7)
+#define SA1111_DEVID_INT	(1 << 8)
+#define SA1111_DEVID_PCMCIA	(1 << 9)
 
 struct sa1111_dev {
 	struct device	dev;
@@ -548,6 +432,7 @@ struct sa1111_driver {
 	int (*remove)(struct sa1111_dev *);
 	int (*suspend)(struct sa1111_dev *, pm_message_t);
 	int (*resume)(struct sa1111_dev *);
+	void (*shutdown)(struct sa1111_dev *);
 };
 
 #define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
@@ -555,9 +440,10 @@ struct sa1111_driver {
 #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
 
 /*
- * These frob the SKPCR register.
+ * These frob the SKPCR register, and call platform specific
+ * enable/disable functions.
  */
-void sa1111_enable_device(struct sa1111_dev *);
+int sa1111_enable_device(struct sa1111_dev *);
 void sa1111_disable_device(struct sa1111_dev *);
 
 unsigned int sa1111_pll_clock(struct sa1111_dev *);
@@ -580,6 +466,10 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 
 struct sa1111_platform_data {
 	int	irq_base;	/* base for cascaded on-chip IRQs */
+	unsigned disable_devs;
+	void	*data;
+	int	(*enable)(void *, unsigned);
+	void	(*disable)(void *, unsigned);
 };
 
 #endif  /* _ASM_ARCH_SA1111 */