Merge branch 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux into late/kirkwood

* 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux:
  ARM: Dove: allow PCI to be disabled
  ARM: dove: SolidRun CuBox DT
  ARM: dove: add device tree descriptors
  ARM: dove: add device tree based machine descriptor
  ARM: dove: add crypto engine
  ARM: dove: add clock gating control
  ARM: dove: unify clock setup
  ARM: initial DTS support for km_kirkwood
  arm: add documentation describing Marvell families of SoC
  ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar
  ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar
  ARM: Kirkwood: Iomega ix2-200 DT support

Context conflicts in arch/arm/Kconfig and arch/arm/mach-dove/common.c.

The new device trees added to arch/arm/mach-kirkwood/Makefile.boot are
kept and dealt with in a separate changeset, since moving them out to
the new Makefile in this merge commit doesn't work well.

Signed-off-by: Olof Johansson <olof@lixom.net>

7 files changed, 452 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
new file mode 100644
index 000000000000..61a8062e56de
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 000000000000..0adbd5a38095
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
new file mode 100644
index 000000000000..e5a920beab45
--- /dev/null
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
new file mode 100644
index 000000000000..96fb824b5e6e
--- /dev/null
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -0,0 +1,143 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
+
+	mbus@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		wdt: wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
new file mode 100644
index 000000000000..08a582414b88
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 000000000000..865aeec40a26
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 000000000000..75bdb93fed26
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};