Merge branch 'clps7500' into devel

Conflicts:

	arch/arm/Kconfig

2 files changed, 0 insertions, 90 deletions

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index c47f2a3f8f8f..fbe5eef1f6c9 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_L7200),y)
 OBJS		+= head-l7200.o
 endif
 
-ifeq ($(CONFIG_ARCH_CLPS7500),y)
-HEAD		= head-clps7500.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
deleted file mode 100644
index 4f3c78ac30a0..000000000000
--- a/arch/arm/boot/compressed/head-clps7500.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-clps7500.S
- *
- * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
- */
-
-
-		/* There are three different ways the kernel can be
-		   booted on a 7500 system: from Angel (loaded in RAM), from
-		   16-bit ROM or from 32-bit Flash.  Luckily, a single kernel
-		   image does for them all. */
-		/* This branch is taken if the CPU memory width matches the
-		   actual device in use.  The default at power on is 16 bits
-		   so we must be prepared for a mismatch. */
-		.section ".start", "ax"
-2:
-		b	1f
-		.word	0xffff
-		.word	0xb632		@ mov r11, #0x03200000
-		.word	0xe3a0
-		.word	0x0000		@ mov r0, #0
-		.word	0xe3a0
-		.word	0x0080		@ strb r0, [r11, #0x80]
-		.word	0xe5cb
-		.word	0xf000		@ mov pc, #0
-		.word	0xe3a0
-1:
-		adr	r1, 2b
-		teq	r1, #0
-		bne	.Langel
-		/* This is a direct-from-ROM boot.  Copy the kernel into 
-		   RAM and run it there. */
-		mov	r0, #0x30
-		mcr	p15, 0, r0, c1, c0, 0
-		mov	r0, #0x13
-		msr	cpsr_cxsf, r0
-		mov	r12, #0x03000000	@ point to LEDs
-		orr	r12, r12, #0x00020000
-		orr	r12, r12, #0xba00
-		mov	r0, #0x5500
-		str	r0, [r12]
-		mov	r0, #0x10000000
-		orr	r0, r0, #0x8000
-		mov	r4, r0
-		ldr	r2, =_end
-2:
-		ldr	r3, [r1], #4
-		str	r3, [r0], #4
-		teq	r0, r2
-		bne	2b
-		mov	r0, #0xff00
-		str	r0, [r12]
-1:	
-		mov	r12, #0x03000000	@ point to LEDs
-		orr	r12, r12, #0x00020000
-		orr	r12, r12, #0xba00
-		mov	r0, #0xfe00
-		str	r0, [r12]
-
-		adr	lr, 1f
-		mov	r0, #0
-		mov	r1, #14		/* MACH_TYPE_CLPS7500 */
-		mov	pc, lr
-.Langel:
-#ifdef CONFIG_ANGELBOOT
-		/* Call Angel to switch into SVC mode. */
-		mov	r0, #0x17
-		swi	0x123456
-#endif
-		/* Ensure all interrupts are off and MMU disabled */
-		mrs	r0, cpsr
-		orr	r0, r0, #0xc0
-		msr	cpsr_cxsf, r0
-
-		adr	lr, 1b
-		orr	lr, lr, #0x10000000
-		mov	r0, #0x30		@ MMU off
-		mcr	p15, 0, r0, c1, c0, 0
-		mov	r0, r0
-	 	mov	pc, lr
-
-		.ltorg
-
-1:
-/* And the rest */
-#include "head.S"