ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor

shirq layer has been adapted to DT, add corresponding nodes in all
SPEAr3xx variants.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

3 files changed, 52 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index fdac8713367a..090adc656015 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -52,6 +52,14 @@
 			status = "disabled";
 		};
 
+		shirq: interrupt-controller@0x50000000 {
+			compatible = "st,spear300-shirq";
+			reg = <0x50000000 0x1000>;
+			interrupts = <28>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -64,12 +72,16 @@
 				compatible = "arm,pl061", "arm,primecell";
 				gpio-controller;
 				reg = <0xa9000000 0x1000>;
+				interrupts = <8>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			kbd@a0000000 {
 				compatible = "st,spear300-kbd";
 				reg = <0xa0000000 0x1000>;
+				interrupts = <7>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 930303e48df9..e814e5e97083 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -40,6 +40,14 @@
 			status = "disabled";
 		};
 
+		shirq: interrupt-controller@0xb4000000 {
+			compatible = "st,spear310-shirq";
+			reg = <0xb4000000 0x1000>;
+			interrupts = <28 29 30 1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -50,30 +58,40 @@
 			serial@b2000000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb2000000 0x1000>;
+				interrupts = <8>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			serial@b2080000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb2080000 0x1000>;
+				interrupts = <9>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			serial@b2100000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb2100000 0x1000>;
+				interrupts = <10>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			serial@b2180000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb2180000 0x1000>;
+				interrupts = <11>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			serial@b2200000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb2200000 0x1000>;
+				interrupts = <12>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 6ff0d1e0e461..c056a84deabf 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -30,7 +30,8 @@
 		clcd@90000000 {
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0x90000000 0x1000>;
-			interrupts = <33>;
+			interrupts = <8>;
+			interrupt-parent = <&shirq>;
 			status = "disabled";
 		};
 
@@ -49,13 +50,24 @@
 		sdhci@70000000 {
 			compatible = "st,sdhci-spear";
 			reg = <0x70000000 0x100>;
-			interrupts = <29>;
+			interrupts = <10>;
+			interrupt-parent = <&shirq>;
 			status = "disabled";
 		};
 
+		shirq: interrupt-controller@0xb3000000 {
+			compatible = "st,spear320-shirq";
+			reg = <0xb3000000 0x1000>;
+			interrupts = <30 28 29 1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
 		spi1: spi@a5000000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xa5000000 0x1000>;
+			interrupts = <15>;
+			interrupt-parent = <&shirq>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -64,6 +76,8 @@
 		spi2: spi@a6000000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xa6000000 0x1000>;
+			interrupts = <16>;
+			interrupt-parent = <&shirq>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -88,18 +102,24 @@
 				#size-cells = <0>;
 				compatible = "snps,designware-i2c";
 				reg = <0xa7000000 0x1000>;
+				interrupts = <21>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			serial@a3000000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xa3000000 0x1000>;
+				interrupts = <13>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};
 
 			serial@a4000000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xa4000000 0x1000>;
+				interrupts = <14>;
+				interrupt-parent = <&shirq>;
 				status = "disabled";
 			};