diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-12-13 10:39:26 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-12-13 10:39:26 -0800 |
| commit | db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070 (patch) | |
| tree | 4e874d81ca9037dda1007178bbc9613649d43305 /arch/arm/boot | |
| parent | 6be35c700f742e911ecedd07fcc43d4439922334 (diff) | |
| parent | 64507dd7028e3e0145077e73b8374bd75aea117c (diff) | |
| download | blackbird-op-linux-db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070.tar.gz blackbird-op-linux-db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070.zip | |
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions and enablement from Olof Johansson:
"Continued device tree conversion and enablement across a number of
platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
smaller series as well.
ux500 has seen continued conversion for platforms. Several platforms
have seen pinctrl-via-devicetree conversions for simpler
multiplatform. Tegra is adding data for new devices/drivers, and
Exynos has a bunch of new bindings and devices added as well.
So, pretty much the same progression in the right direction as the
last few releases."
Fix up conflicts as per Olof.
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
ARM: ux500: Rename dbx500 cpufreq code to be more generic
ARM: dts: add missing ux500 device trees
ARM: ux500: Stop registering the PCM driver from platform code
ARM: ux500: Move board specific GPIO info out to subordinate DTS files
ARM: ux500: Disable the MMCI gpio-regulator by default
ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
ARM: Kirkwood: Add support LED of OpenBlocks A6
ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
ARM: kirkwood: Add support DT of second I2C bus
ARM: kirkwood: Convert mplcec4 board to pinctrl
ARM: Kirkwood: Convert km_kirkwood to pinctrl
ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
ARM: Kirkwood: Convert IX2-200 to pinctrl.
ARM: Kirkwood: Convert lsxl boards to pinctrl.
ARM: Kirkwood: Convert ib62x0 to pinctrl.
ARM: Kirkwood: Convert GoFlex Net to pinctrl.
ARM: Kirkwood: Convert dreamplug to pinctrl.
ARM: Kirkwood: Convert dockstar to pinctrl.
...
Diffstat (limited to 'arch/arm/boot')
83 files changed, 5824 insertions, 392 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f3f2f80cdf3b..2af359cfe985 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -34,6 +34,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb +dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ + da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-dove-db.dtb @@ -41,7 +43,10 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb \ - exynos5440-ssdk5440.dtb + exynos5440-ssdk5440.dtb \ + exynos4412-smdk4412.dtb \ + exynos5250-smdk5250.dtb \ + exynos5250-snow.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ @@ -79,16 +84,20 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ imx6q-arm2.dtb \ + imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ + imx28-apf28.dtb \ + imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ + imx28-sps1.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle.dtb \ @@ -105,7 +114,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-bone.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_U8500) += snowball.dtb +dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ + hrefprev60.dtb \ + hrefv60plus.dtb \ + ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ sh73a0-kzm9g.dtb \ @@ -137,6 +149,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb targets += dtbs endif diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index b1d3fab60e0a..c528b4b429b9 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -479,6 +479,12 @@ trigger-external; }; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 66106eecf1ed..00485e1dff93 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -404,6 +404,12 @@ #size-cells = <0>; status = "disabled"; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 0741caeeced1..485fc395efc6 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -473,6 +473,12 @@ #size-cells = <0>; status = "disabled"; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts new file mode 100644 index 000000000000..04305463f00d --- /dev/null +++ b/arch/arm/boot/dts/ccu9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson CCU9540 platform with Device Tree"; + compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi new file mode 100644 index 000000000000..fddd17417433 --- /dev/null +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -0,0 +1,184 @@ +/* + * Common device tree include for all Exynos 5250 boards based off of Daisy. + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + aliases { + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + + i2c@12C60000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + gpios = <&gpb3 0 2 3 0>, + <&gpb3 1 2 3 0>; + }; + + i2c@12C70000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + gpios = <&gpb3 2 2 3 0>, + <&gpb3 3 2 3 0>; + }; + + i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + gpios = <&gpa0 6 3 0 0>, + <&gpa0 7 3 0 0>; + + hdmiddc@50 { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; + }; + + i2c@12C90000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa1 2 3 3 0>, + <&gpa1 3 3 3 0>; + }; + + i2c@12CA0000 { + status = "disabled"; + }; + + i2c@12CB0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa2 2 3 3 0>, + <&gpa2 3 3 3 0>; + }; + + i2c@12CC0000 { + status = "disabled"; + }; + + i2c@12CD0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpb2 2 3 3 0>, + <&gpb2 3 3 3 0>; + }; + + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy@38 { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; + + dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + wp-gpios = <&gpc2 1 0 0 3>; + gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, + <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, + <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + }; + }; + + dwmmc3@12230000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + /* See board-specific dts files for GPIOs */ + }; + }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; + + hdmi { + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpx1 3 0 0x10000 0>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 731086b2fca2..0d69322f689f 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -217,123 +217,103 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { regulator-compatible = "db8500_vape"; - regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { regulator-compatible = "db8500_varm"; - regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { regulator-compatible = "db8500_vmodem"; - regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { regulator-compatible = "db8500_vpll"; - regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { regulator-compatible = "db8500_vsmps1"; - regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { regulator-compatible = "db8500_vsmps2"; - regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { regulator-compatible = "db8500_vsmps3"; - regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { regulator-compatible = "db8500_vrf1"; - regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { regulator-compatible = "db8500_sva_mmdsp"; - regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { regulator-compatible = "db8500_sva_mmdsp_ret"; - regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { regulator-compatible = "db8500_sva_pipe"; - regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { regulator-compatible = "db8500_sia_mmdsp"; - regulator-name = "db8500_sia_mmdsp"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSPRET db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { regulator-compatible = "db8500_sia_pipe"; - regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { regulator-compatible = "db8500_sga"; - regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { regulator-compatible = "db8500_b2r2_mcde"; - regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { regulator-compatible = "db8500_esram12"; - regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { regulator-compatible = "db8500_esram12_ret"; - regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { regulator-compatible = "db8500_esram34"; - regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { regulator-compatible = "db8500_esram34_ret"; - regulator-name = "db8500-esram34-ret"; }; }; @@ -412,7 +392,6 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-compatible = "ab8500_ldo_aux1"; - regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; regulator-boot-on; @@ -423,7 +402,6 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { regulator-compatible = "ab8500_ldo_aux2"; - regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -431,7 +409,6 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { regulator-compatible = "ab8500_ldo_aux3"; - regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -439,49 +416,41 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { regulator-compatible = "ab8500_ldo_initcore"; - regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { regulator-compatible = "ab8500_ldo_tvout"; - regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { regulator-compatible = "ab8500_ldo_usb"; - regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { regulator-compatible = "ab8500_ldo_audio"; - regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { regulator-compatible = "ab8500_ldo_anamic1"; - regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { regulator-compatible = "ab8500_ldo_amamic2"; - regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { regulator-compatible = "ab8500_ldo_dmic"; - regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { regulator-compatible = "ab8500_ldo_ana"; - regulator-name = "V-CSI/DSI"; }; }; }; @@ -585,42 +554,42 @@ status = "disabled"; }; - sdi@80126000 { + sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; interrupts = <0 60 0x4>; status = "disabled"; }; - sdi@80118000 { + sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; - sdi@80005000 { + sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; - sdi@80119000 { + sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; - sdi@80114000 { + sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; - sdi@80008000 { + sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; @@ -674,5 +643,18 @@ status = "disabled"; }; + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 0adbd5a38095..fed7d3f9f431 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -40,3 +40,13 @@ reg = <0>; }; }; + +&pinctrl { + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 5a00022383e7..61f391412a5a 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,6 +4,12 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + soc@f1000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -72,7 +78,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0400 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <12>, <13>, <14>, <60>; }; @@ -81,7 +88,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0420 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <61>; }; @@ -90,7 +98,12 @@ #gpio-cells = <2>; gpio-controller; reg = <0xe8400 0x0c>; - ngpio = <8>; + ngpios = <8>; + }; + + pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x10>; }; spi0: spi@10600 { diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index b7354e6506de..96e50f569433 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -22,10 +22,22 @@ status = "okay"; }; + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; usb0: ohci@00500000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 96d4462730fb..e1347fceb5bc 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -28,6 +28,44 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_tv: tv-power-domain@10023C20 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C20 0x20>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_gps: gps-power-domain@10023CE0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CE0 0x20>; }; gic:interrupt-controller@10490000 { @@ -121,7 +159,7 @@ status = "disabled"; }; - i2c@13860000 { + i2c_0: i2c@13860000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -130,7 +168,7 @@ status = "disabled"; }; - i2c@13870000 { + i2c_1: i2c@13870000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -139,7 +177,7 @@ status = "disabled"; }; - i2c@13880000 { + i2c_2: i2c@13880000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -148,7 +186,7 @@ status = "disabled"; }; - i2c@13890000 { + i2c_3: i2c@13890000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -157,7 +195,7 @@ status = "disabled"; }; - i2c@138A0000 { + i2c_4: i2c@138A0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -166,7 +204,7 @@ status = "disabled"; }; - i2c@138B0000 { + i2c_5: i2c@138B0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -175,7 +213,7 @@ status = "disabled"; }; - i2c@138C0000 { + i2c_6: i2c@138C0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -184,7 +222,7 @@ status = "disabled"; }; - i2c@138D0000 { + i2c_7: i2c@138D0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 3e68f52e8454..f2710018e84e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -22,38 +22,54 @@ compatible = "insignal,origen", "samsung,exynos4210"; memory { - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; + sdhci@12530000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk2 2 2 3 3>; - gpios = <&gpk2 0 2 0 3>, - <&gpk2 1 2 0 3>, - <&gpk2 3 2 3 3>, - <&gpk2 4 2 3 3>, - <&gpk2 5 2 3 3>, - <&gpk2 6 2 3 3>; + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; status = "okay"; }; sdhci@12510000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk0 2 2 3 3>; - gpios = <&gpk0 0 2 0 3>, - <&gpk0 1 2 0 3>, - <&gpk0 3 2 3 3>, - <&gpk0 4 2 3 3>, - <&gpk0 5 2 3 3>, - <&gpk0 6 2 3 3>; + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { status = "okay"; }; @@ -64,35 +80,35 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0x10000 2>; + gpios = <&gpx2 0 1>; linux,code = <103>; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 0 0x10000 2>; + gpios = <&gpx2 1 1>; linux,code = <108>; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 0 0x10000 2>; + gpios = <&gpx1 7 1>; linux,code = <158>; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 0 0x10000 2>; + gpios = <&gpx1 6 1>; linux,code = <102>; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0x10000 2>; + gpios = <&gpx1 5 1>; linux,code = <139>; gpio-key,wakeup; }; @@ -101,7 +117,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 0 0x10000 2>; + gpios = <&gpx1 3 1>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 6a4a1a04221c..55a2efb763d1 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -482,196 +482,196 @@ samsung,pins = "gpk0-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_cmd: sd0-cmd { samsung,pins = "gpk0-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_cd: sd0-cd { samsung,pins = "gpk0-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus1: sd0-bus-width1 { samsung,pins = "gpk0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus4: sd0-bus-width4 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus8: sd0-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_clk: sd4-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_cmd: sd4-cmd { samsung,pins = "gpk0-1"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_cd: sd4-cd { samsung,pins = "gpk0-2"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus1: sd4-bus-width1 { samsung,pins = "gpk0-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus4: sd4-bus-width4 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <3>; samsung,pin-pud = <4>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_clk: sd1-clk { samsung,pins = "gpk1-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_cmd: sd1-cmd { samsung,pins = "gpk1-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_cd: sd1-cd { samsung,pins = "gpk1-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_bus1: sd1-bus-width1 { samsung,pins = "gpk1-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_bus4: sd1-bus-width4 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_clk: sd2-clk { samsung,pins = "gpk2-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_cmd: sd2-cmd { samsung,pins = "gpk2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_cd: sd2-cd { samsung,pins = "gpk2-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus1: sd2-bus-width1 { samsung,pins = "gpk2-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus4: sd2-bus-width4 { samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus8: sd2-bus-width8 { samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_clk: sd3-clk { samsung,pins = "gpk3-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_cmd: sd3-cmd { samsung,pins = "gpk3-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_cd: sd3-cd { samsung,pins = "gpk3-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_bus1: sd3-bus-width1 { samsung,pins = "gpk3-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_bus4: sd3-bus-width4 { samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; eint0: ext-int0 { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 63610c3ba3af..9b23a8255e39 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -43,6 +43,22 @@ status = "okay"; }; + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + keypad@100A0000 { samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a21511c14071..c346b64dff55 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -35,24 +35,15 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 1 0 0>; + gpio = <&gpk0 2 0>; enable-active-high; }; sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; - broken-voltage; - gpios = <&gpk0 0 2 0 3>, - <&gpk0 1 2 0 3>, - <&gpk0 3 2 2 3>, - <&gpk0 4 2 2 3>, - <&gpk0 5 2 2 3>, - <&gpk0 6 2 2 3>, - <&gpk1 3 3 3 3>, - <&gpk1 4 3 3 3>, - <&gpk1 5 3 3 3>, - <&gpk1 6 3 3 3>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; vmmc-supply = <&vemmc_reg>; status = "okay"; }; @@ -73,12 +64,74 @@ status = "okay"; }; + gpio-keys { + compatible = "gpio-keys"; + + vol-down-key { + gpios = <&gpx2 1 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + vol-up-key { + gpios = <&gpx2 0 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + power-key { + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + + ok-key { + gpios = <&gpx3 5 1>; + linux,code = <352>; + label = "ok"; + debounce-interval = <10>; + }; + }; + + tsp_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpl0 3 0>; + enable-active-high; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpx0>; + interrupts = <4 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&tsp_reg>; + vdd-supply = <&tsp_reg>; + }; + }; + i2c@138B0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; - gpios = <&gpb 6 3 3 0>, - <&gpb 7 3 3 0>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; status = "okay"; max8997_pmic@66 { @@ -93,9 +146,9 @@ max8997,pmic-ignore-gpiodvs-side-effect; max8997,pmic-buck125-default-dvs-idx = <0>; - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>, - <&gpx0 6 1 0 0>, - <&gpl0 0 1 0 0>; + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>, + <&gpl0 0 0>; max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index d877dbe7ac0e..e31bfc4a6f09 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,11 @@ pinctrl2 = &pinctrl_2; }; + pd_lcd1: lcd1-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + gic:interrupt-controller@10490000 { cpu-offset = <0x8000>; }; @@ -64,4 +69,11 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x03860000 0x1000>; }; + + tmu@100C0000 { + compatible = "samsung,exynos4210-tmu"; + interrupt-parent = <&combiner>; + reg = <0x100C0000 0x100>; + interrupts = <2 4>; + }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi new file mode 100644 index 000000000000..c6ae2005961f --- /dev/null +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -0,0 +1,28 @@ +/* + * Samsung's Exynos4212 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4212"; + + gic:interrupt-controller@10490000 { + cpu-offset = <0x8000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 index 000000000000..f05bf575cc45 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -0,0 +1,45 @@ +/* + * Samsung's Exynos4412 based SMDK board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's SMDK4412 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Samsung SMDK evaluation board based on Exynos4412"; + compatible = "samsung,smdk4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi new file mode 100644 index 000000000000..d7dfe312772a --- /dev/null +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -0,0 +1,28 @@ +/* + * Samsung's Exynos4412 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4412"; + + gic:interrupt-controller@10490000 { + cpu-offset = <0x4000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi new file mode 100644 index 000000000000..8e6115adcd97 --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -0,0 +1,965 @@ +/* + * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi1_clk: mipi1-clk { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ldi: lcd-ldi { + samsung,pins = "gpf3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a: cam-port-a { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3", + "gpj1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <4>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + keypad_col0: keypad-col0 { + samsung,pins = "gpl2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col1 { + samsung,pins = "gpl2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col2 { + samsung,pins = "gpl2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col3 { + samsung,pins = "gpl2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col4 { + samsung,pins = "gpl2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col5 { + samsung,pins = "gpl2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col6 { + samsung,pins = "gpl2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col7 { + samsung,pins = "gpl2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b: cam-port-b { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1", + "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <0x3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@106E0000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_bus: c2c-bus { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7", + "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7", + "gpv4-0", "gpv4-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi new file mode 100644 index 000000000000..179a62e46c9d --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -0,0 +1,69 @@ +/* + * Samsung's Exynos4x12 SoCs device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4.dtsi" +/include/ "exynos4x12-pinctrl.dtsi" + +/ { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + combiner:interrupt-controller@10440000 { + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; + }; + + pinctrl_3: pinctrl@106E0000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a352df403b7a..942d5761ca97 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,10 +17,6 @@ compatible = "samsung,smdk5250", "samsung,exynos5250"; aliases { - mshc0 = &dwmmc_0; - mshc1 = &dwmmc_1; - mshc2 = &dwmmc_2; - mshc3 = &dwmmc_3; }; memory { @@ -55,8 +51,31 @@ }; }; + i2c@121D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata-phy { + compatible = "samsung,sata-phy"; + reg = <0x38>; + }; + }; + + sata@122F0000 { + samsung,sata-freq = <66>; + }; + i2c@12C80000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa0 6 3 3 0>, + <&gpa0 7 3 3 0>; + + hdmiddc@50 { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; }; i2c@12C90000 { @@ -79,7 +98,17 @@ status = "disabled"; }; - dwmmc_0: dwmmc0@12200000 { + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiphy@38 { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; + }; + + dwmmc0@12200000 { num-slots = <1>; supports-highspeed; broken-cd; @@ -100,11 +129,11 @@ }; }; - dwmmc_1: dwmmc1@12210000 { + dwmmc1@12210000 { status = "disabled"; }; - dwmmc_2: dwmmc2@12220000 { + dwmmc2@12220000 { num-slots = <1>; supports-highspeed; fifo-depth = <0x80>; @@ -125,7 +154,7 @@ }; }; - dwmmc_3: dwmmc3@12230000 { + dwmmc3@12230000 { status = "disabled"; }; @@ -166,4 +195,13 @@ spi_2: spi@12d40000 { status = "disabled"; }; + + hdmi { + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; + + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts new file mode 100644 index 000000000000..17dd951c1cd2 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -0,0 +1,43 @@ +/* + * Google Snow board device tree source + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" +/include/ "cros5250-common.dtsi" + +/ { + model = "Google Snow"; + compatible = "google,snow", "samsung,exynos5250"; + + gpio-keys { + compatible = "gpio-keys"; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 0 0x10000 0>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + /* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ + dwmmc3@12230000 { + slot@0 { + gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>, + <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>, + <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index dddfd6e444dc..36d8246ea50e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -31,6 +31,10 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; + mshc0 = &dwmmc_0; + mshc1 = &dwmmc_1; + mshc2 = &dwmmc_2; + mshc3 = &dwmmc_3; }; gic:interrupt-controller@10481000 { @@ -62,12 +66,24 @@ interrupts = <0 42 0>; }; + codec@11000000 { + compatible = "samsung,mfc-v6"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + }; + rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; }; + tmu@10060000 { + compatible = "samsung,exynos5250-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + }; + serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; @@ -92,6 +108,17 @@ interrupts = <0 54 0>; }; + sata@122F0000 { + compatible = "samsung,exynos5-sata-ahci"; + reg = <0x122F0000 0x1ff>; + interrupts = <0 115 0>; + }; + + sata-phy@12170000 { + compatible = "samsung,exynos5-sata-phy"; + reg = <0x12170000 0x1ff>; + }; + i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; @@ -156,6 +183,21 @@ #size-cells = <0>; }; + i2c@12CE0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <0 64 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@121D0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + }; + spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; @@ -186,7 +228,7 @@ #size-cells = <0>; }; - dwmmc0@12200000 { + dwmmc_0: dwmmc0@12200000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; interrupts = <0 75 0>; @@ -194,7 +236,7 @@ #size-cells = <0>; }; - dwmmc1@12210000 { + dwmmc_1: dwmmc1@12210000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; interrupts = <0 76 0>; @@ -202,7 +244,7 @@ #size-cells = <0>; }; - dwmmc2@12220000 { + dwmmc_2: dwmmc2@12220000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; interrupts = <0 77 0>; @@ -210,7 +252,7 @@ #size-cells = <0>; }; - dwmmc3@12230000 { + dwmmc_3: dwmmc3@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; interrupts = <0 78 0>; @@ -520,4 +562,16 @@ reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; }; + + hdmi { + compatible = "samsung,exynos5-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + }; + + mixer { + compatible = "samsung,exynos5-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; }; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi new file mode 100644 index 000000000000..592fb9dc35bd --- /dev/null +++ b/arch/arm/boot/dts/href.dtsi @@ -0,0 +1,273 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "dbx5x0.dtsi" + +/ { + memory { + reg = <0x00000000 0x20000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + linux,code = <11>; + label = "SFH7741 Proximity Sensor"; + }; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts new file mode 100644 index 000000000000..eec29c4a86dc --- /dev/null +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + gpio_keys { + button@1 { + gpios = <&tc3589x_gpio 7 0x4>; + }; + }; + + soc-u9500 { + i2c@80004000 { + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + }; + + vmmci: regulator-gpio { + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 2131d77dc9c9..55f4191a626e 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -11,85 +11,200 @@ /dts-v1/; /include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" / { - model = "ST-Ericsson HREF platform with Device Tree"; - compatible = "st-ericsson,hrefv60+"; + model = "ST-Ericsson HREF (v60+) platform with Device Tree"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - memory { - reg = <0x00000000 0x20000000>; + gpio_keys { + button@1 { + gpios = <&gpio6 25 0x4>; + }; }; soc-u9500 { - uart@80120000 { + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&gpio4 15 0x4>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + status = "okay"; }; - uart@80121000 { + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + status = "okay"; }; - uart@80007000 { + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - compatible = "tc3589x"; - reg = <0x42>; - interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; - interrupt-controller; - #interrupt-cells = <2>; + status = "okay"; + }; - tc3589x_gpio: tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; }; - }; - tps61052@33 { - compatible = "tps61052"; - reg = <0x33>; - }; - }; + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; - i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; - reg = <0x33>; - }; + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; - lp5521@0x34 { - compatible = "lp5521"; - reg = <0x34>; - }; + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; - bh1780@0x29 { - compatible = "rohm,bh1780gli"; - reg = <0x33>; + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; }; - }; - sound { - compatible = "stericsson,snd-soc-mop500"; + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - }; + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; - msp1: msp@80124000 { - status = "okay"; - }; + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; - msp3: msp@80125000 { - status = "okay"; + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 384d8b66f337..7c43b8e70b9f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -40,6 +40,15 @@ reg = <0>; fsl,pinmux-ids = < 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + led_pin_gpio0_17: led_gpio0_17@0 { + reg = <0>; + fsl,pinmux-ids = < 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; @@ -47,6 +56,15 @@ fsl,pull-up = <0>; }; }; + + ssp1: ssp@80034000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; }; apbx@80040000 { @@ -91,11 +109,12 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio0_17>; user { label = "green"; - gpios = <&gpio2 1 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio2 1 1>; }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 6d31aa383460..65415c598a5e 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -279,6 +279,19 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */ + 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */ + 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */ + 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; digctl@8001c000 { diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts new file mode 100644 index 000000000000..d81f8a0b9794 --- /dev/null +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx25.dtsi" + +/ { + model = "Ka-Ro TX25"; + compatible = "karo,imx25-tx25", "fsl,imx25"; + + memory { + reg = <0x80000000 0x02000000 0x90000000 0x02000000>; + }; + + soc { + aips@43f00000 { + uart1: serial@43f90000 { + status = "okay"; + }; + }; + + spba@50000000 { + fec: ethernet@50038000 { + status = "okay"; + phy-mode = "rmii"; + }; + }; + + emi@80000000 { + nand@bb000000 { + nand-on-flash-bbt; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi new file mode 100644 index 000000000000..e1b13ebc96d6 --- /dev/null +++ b/arch/arm/boot/dts/imx25.dtsi @@ -0,0 +1,515 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + usb0 = &usbotg; + usb1 = &usbhost1; + }; + + asic: asic-interrupt-controller@68000000 { + compatible = "fsl,imx25-asic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x68000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&asic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + i2c1: i2c@43f80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <3>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <10>; + status = "disabled"; + }; + + can1: can@43f88000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f88000 0x4000>; + interrupts = <43>; + clocks = <&clks 75>, <&clks 75>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: can@43f8c000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f8c000 0x4000>; + interrupts = <44>; + clocks = <&clks 76>, <&clks 76>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 120>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + clocks = <&clks 121>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c2: i2c@43f98000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <4>; + status = "disabled"; + }; + + owire@43f9c000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43f9c000 0x4000>; + clocks = <&clks 51>; + clock-names = ""; + interrupts = <2>; + status = "disabled"; + }; + + spi1: cspi@43fa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x43fa4000 0x4000>; + clocks = <&clks 62>; + clock-names = "ipg"; + interrupts = <14>; + status = "disabled"; + }; + + kpp@43fa8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43fa8000 0x4000>; + clocks = <&clks 102>; + clock-names = ""; + interrupts = <24>; + status = "disabled"; + }; + + iomuxc@43fac000{ + compatible = "fsl,imx25-iomuxc"; + reg = <0x43fac000 0x4000>; + }; + + audmux@43fb0000 { + compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; + reg = <0x43fb0000 0x4000>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x40000>; + ranges; + + spi3: cspi@50004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50004000 0x4000>; + interrupts = <0>; + clocks = <&clks 80>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart4: serial@50008000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x50008000 0x4000>; + interrupts = <5>; + clocks = <&clks 123>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@5000c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + clocks = <&clks 122>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + spi2: cspi@50010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50010000 0x4000>; + clocks = <&clks 79>; + clock-names = "ipg"; + interrupts = <13>; + status = "disabled"; + }; + + ssi2: ssi@50014000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <11>; + status = "disabled"; + }; + + esai@50018000 { + reg = <0x50018000 0x4000>; + interrupts = <7>; + }; + + uart5: serial@5002c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5002c000 0x4000>; + interrupts = <40>; + clocks = <&clks 124>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + tsc: tsc@50030000 { + compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; + reg = <0x50030000 0x4000>; + interrupts = <46>; + clocks = <&clks 119>; + clock-names = "ipg"; + status = "disabled"; + }; + + ssi1: ssi@50034000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50034000 0x4000>; + interrupts = <12>; + status = "disabled"; + }; + + fec: ethernet@50038000 { + compatible = "fsl,imx25-fec"; + reg = <0x50038000 0x4000>; + interrupts = <57>; + clocks = <&clks 88>, <&clks 65>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + }; + + aips@53f00000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + clks: ccm@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + gpt4: timer@53f84000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f84000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <1>; + }; + + gpt3: timer@53f88000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f88000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <29>; + }; + + gpt2: timer@53f8c000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f8c000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <53>; + }; + + gpt1: timer@53f90000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <54>; + }; + + epit1: timer@53f94000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f94000 0x4000>; + interrupts = <28>; + }; + + epit2: timer@53f98000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f98000 0x4000>; + interrupts = <27>; + }; + + gpio4: gpio@53f9c000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53f9c000 0x4000>; + interrupts = <23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm2: pwm@53fa0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa0000 0x4000>; + clocks = <&clks 106>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <36>; + }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm3: pwm@53fa8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa8000 0x4000>; + clocks = <&clks 107>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <41>; + }; + + esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <9>; + clocks = <&clks 86>, <&clks 63>, <&clks 45>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + esdhc2: esdhc@53fb8000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb8000 0x4000>; + interrupts = <8>; + clocks = <&clks 87>, <&clks 64>, <&clks 46>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + lcdc@53fbc000 { + reg = <0x53fbc000 0x4000>; + interrupts = <39>; + clocks = <&clks 103>, <&clks 66>, <&clks 49>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + slcdc@53fc0000 { + reg = <0x53fc0000 0x4000>; + interrupts = <38>; + status = "disabled"; + }; + + pwm4: pwm@53fc8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + reg = <0x53fc8000 0x4000>; + clocks = <&clks 108>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <42>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma@53fd4000 { + compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + reg = <0x53fd4000 0x4000>; + clocks = <&clks 112>, <&clks 68>; + clock-names = "ipg", "ahb"; + interrupts = <34>; + }; + + wdog@53fdc000 { + compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 126>; + clock-names = ""; + interrupts = <55>; + }; + + pwm1: pwm@53fe0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fe0000 0x4000>; + clocks = <&clks 105>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <26>; + }; + + usbphy1: usbphy@1 { + compatible = "nop-usbphy"; + status = "disabled"; + }; + + usbphy2: usbphy@2 { + compatible = "nop-usbphy"; + status = "disabled"; + }; + + usbotg: usb@53ff4000 { + compatible = "fsl,imx25-usb", "fsl,imx27-usb"; + reg = <0x53ff4000 0x0200>; + interrupts = <37>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbhost1: usb@53ff4400 { + compatible = "fsl,imx25-usb", "fsl,imx27-usb"; + reg = <0x53ff4400 0x0200>; + interrupts = <35>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbmisc: usbmisc@53ff4600 { + #index-cells = <1>; + compatible = "fsl,imx25-usbmisc"; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + reg = <0x53ff4600 0x00f>; + status = "disabled"; + }; + + dryice@53ffc000 { + compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + clock-names = "ipg"; + interrupts = <25>; + }; + }; + + emi@80000000 { + compatible = "fsl,emi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3b002000>; + ranges; + + nand@bb000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx25-nand"; + reg = <0xbb000000 0x2000>; + clocks = <&clks 50>; + clock-names = ""; + interrupts = <33>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts new file mode 100644 index 000000000000..c0327c054de2 --- /dev/null +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr> + * Copyright 2012 Armadeus Systems <support@armadeus.com> + * + * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "Armadeus Systems APF27 module"; + compatible = "armadeus,imx27-apf27", "fsl,imx27"; + + memory { + reg = <0xa0000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc26m { + compatible = "fsl,imx-osc26m", "fixed-clock"; + clock-frequency = <0>; + }; + }; + + soc { + aipi@10000000 { + serial@1000a000 { + status = "okay"; + }; + + ethernet@1002b000 { + status = "okay"; + }; + }; + + nand@d8000000 { + status = "okay"; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "env2"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x200000 0x80000>; + }; + + partition@280000 { + label = "dtb"; + reg = <0x280000 0x80000>; + }; + + partition@300000 { + label = "kernel"; + reg = <0x300000 0x500000>; + }; + + partition@800000 { + label = "rootfs"; + reg = <0x800000 0xf800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 67d672792b0d..b8d3905915ac 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -58,7 +58,7 @@ reg = <0x10000000 0x10000000>; ranges; - wdog@10002000 { + wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x4000>; interrupts = <27>; @@ -218,7 +218,8 @@ status = "disabled"; }; }; - nand@d8000000 { + + nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts new file mode 100644 index 000000000000..7eb075876c4c --- /dev/null +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Armadeus Systems APF28 module"; + compatible = "armadeus,imx28-apf28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; + + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; + + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; + + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; + + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; + }; + + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; + }; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 0>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts new file mode 100644 index 000000000000..6d8865bfb4b7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF28Dev is a docking board for the APF28 SOM */ +/include/ "imx28-apf28.dts" + +/ { + model = "Armadeus Systems APF28Dev docking/development board"; + compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */ + 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */ + 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */ + 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */ + 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */ + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + status = "okay"; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio0 23 0>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 23 1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio0 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + + pwms = <&pwm 3 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index c03a577beca3..1594694532b9 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -22,6 +22,31 @@ apb@80000000 { apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_cfa10036>; + + hog_pins_cfa10036: hog-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -33,16 +58,37 @@ }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_b>; status = "okay"; }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + status = "okay"; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7 0>; + }; + }; }; }; leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cfa10036>; power { gpios = <&gpio3 4 1>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 05c892e931e3..b222614ac9e0 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -22,6 +22,22 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10049>; + + hog_pins_cfa10049: hog-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < @@ -29,6 +45,7 @@ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ + 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -60,6 +77,11 @@ spi-max-frequency = <100000>; }; + dac0: dh2228@2 { + compatible = "rohm,dh2228fv"; + reg = <2>; + spi-max-frequency = <100000>; + }; }; }; @@ -96,4 +118,15 @@ gpio = <&gpio0 7 1>; }; }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index a0ad71ca3a44..2da316e04409 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -76,7 +76,6 @@ 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ >; @@ -85,6 +84,16 @@ fsl,pull-up = <0>; }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + gpmi_pins_evk: gpmi-nand-evk@0 { reg = <0>; fsl,pinmux-ids = < @@ -288,6 +297,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; user { label = "Heartbeat"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts new file mode 100644 index 000000000000..e6cde8aa7fff --- /dev/null +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "SchulerControl GmbH, SC SPS 1"; + compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */ + 0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */ + 0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_b>; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gpio-leds"; + status = "okay"; + + led@1 { + label = "sps1-1:yellow:user"; + gpios = <&gpio0 6 0>; + linux,default-trigger = "heartbeat"; + reg = <0>; + }; + + led@2 { + label = "sps1-2:red:user"; + gpios = <&gpio0 3 0>; + linux,default-trigger = "heartbeat"; + reg = <1>; + }; + + led@3 { + label = "sps1-3:red:user"; + gpios = <&gpio0 0 0>; + default-trigger = "heartbeat"; + reg = <2>; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index b4587b27ae42..13b7053d799e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -492,6 +492,16 @@ fsl,pull-up = <0>; }; + pwm3_pins_a: pwm3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c0 /* MX28_PAD_PWM3__PWM_3 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < @@ -535,6 +545,31 @@ fsl,pull-up = <0>; }; + lcdif_16bit_pins_a: lcdif-16bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 2781e47cff0d..1f5d45eff45e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -83,7 +83,7 @@ reg = <0x70000000 0x40000>; ranges; - esdhc@70004000 { /* ESDHC1 */ + esdhc1: esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; @@ -92,12 +92,13 @@ status = "disabled"; }; - esdhc@70008000 { /* ESDHC2 */ + esdhc2: esdhc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; clocks = <&clks 45>, <&clks 0>, <&clks 72>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; @@ -110,7 +111,7 @@ status = "disabled"; }; - ecspi@70010000 { /* ECSPI1 */ + ecspi1: ecspi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -131,47 +132,49 @@ status = "disabled"; }; - esdhc@70020000 { /* ESDHC3 */ + esdhc3: esdhc@70020000 { compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; clocks = <&clks 46>, <&clks 0>, <&clks 73>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - esdhc@70024000 { /* ESDHC4 */ + esdhc4: esdhc@70024000 { compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; clocks = <&clks 47>, <&clks 0>, <&clks 74>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; }; - usb@73f80000 { + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; interrupts = <18>; status = "disabled"; }; - usb@73f80200 { + usbh1: usb@73f80200 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80200 0x0200>; interrupts = <14>; status = "disabled"; }; - usb@73f80400 { + usbh2: usb@73f80400 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80400 0x0200>; interrupts = <16>; status = "disabled"; }; - usb@73f80600 { + usbh3: usb@73f80600 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80600 0x0200>; interrupts = <17>; @@ -218,14 +221,14 @@ #interrupt-cells = <2>; }; - wdog@73f98000 { /* WDOG1 */ + wdog1: wdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; clocks = <&clks 0>; }; - wdog@73f9c000 { /* WDOG2 */ + wdog2: wdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; @@ -233,7 +236,7 @@ status = "disabled"; }; - iomuxc@73fa8000 { + iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; @@ -460,7 +463,7 @@ reg = <0x80000000 0x10000000>; ranges; - ecspi@83fac000 { /* ECSPI2 */ + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -471,7 +474,7 @@ status = "disabled"; }; - sdma@83fb0000 { + sdma: sdma@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; @@ -480,7 +483,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi@83fc0000 { + cspi: cspi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; @@ -491,7 +494,7 @@ status = "disabled"; }; - i2c@83fc4000 { /* I2C2 */ + i2c2: i2c@83fc4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; @@ -501,7 +504,7 @@ status = "disabled"; }; - i2c@83fc8000 { /* I2C1 */ + i2c1: i2c@83fc8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; @@ -521,13 +524,13 @@ status = "disabled"; }; - audmux@83fd0000 { + audmux: audmux@83fd0000 { compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; reg = <0x83fd0000 0x4000>; status = "disabled"; }; - nand@83fdb000 { + nfc: nand@83fdb000 { compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; @@ -545,7 +548,7 @@ status = "disabled"; }; - ethernet@83fec000 { + fec: ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 08948af86d1a..b0075537195b 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -60,10 +60,17 @@ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + >; + }; + + led_pin_gpio7_7: led_gpio7_7@0 { + fsl,pins = < 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ >; }; }; + }; uart1: serial@53fbc000 { @@ -100,76 +107,93 @@ pmic: dialog@48 { compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ regulators { - buck0 { + buck1_reg: buck1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; + regulator-always-on; }; - buck1 { + buck2_reg: buck2 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; + regulator-always-on; }; - buck2 { + buck3_reg: buck3 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; + regulator-always-on; }; - buck3 { + buck4_reg: buck4 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; + regulator-always-on; }; - ldo4 { + ldo1_reg: ldo1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - ldo5 { + ldo2_reg: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; - ldo6 { + ldo4_reg: ldo4 { regulator-min-microvolt = <1725000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; - ldo7 { + ldo5_reg: ldo5 { regulator-min-microvolt = <1725000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; - ldo8 { + ldo6_reg: ldo6 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo9 { + ldo7_reg: ldo7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo10 { + ldo8_reg: ldo8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo11 { + ldo9_reg: ldo9 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo12 { + ldo10_reg: ldo10 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3650000>; - }; - - ldo13 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; + regulator-always-on; }; }; }; @@ -216,6 +240,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio7_7>; user { label = "Heartbeat"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index da9a047ce4cf..552aed4ff982 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -88,21 +88,23 @@ reg = <0x50000000 0x40000>; ranges; - esdhc@50004000 { /* ESDHC1 */ + esdhc1: esdhc@50004000 { compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks 44>, <&clks 0>, <&clks 71>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - esdhc@50008000 { /* ESDHC2 */ + esdhc2: esdhc@50008000 { compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks 45>, <&clks 0>, <&clks 72>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; @@ -115,7 +117,7 @@ status = "disabled"; }; - ecspi@50010000 { /* ECSPI1 */ + ecspi1: ecspi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -136,47 +138,49 @@ status = "disabled"; }; - esdhc@50020000 { /* ESDHC3 */ + esdhc3: esdhc@50020000 { compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks 46>, <&clks 0>, <&clks 73>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - esdhc@50024000 { /* ESDHC4 */ + esdhc4: esdhc@50024000 { compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks 47>, <&clks 0>, <&clks 74>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; }; - usb@53f80000 { + usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; status = "disabled"; }; - usb@53f80200 { + usbh1: usb@53f80200 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80200 0x0200>; interrupts = <14>; status = "disabled"; }; - usb@53f80400 { + usbh2: usb@53f80400 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80400 0x0200>; interrupts = <16>; status = "disabled"; }; - usb@53f80600 { + usbh3: usb@53f80600 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80600 0x0200>; interrupts = <17>; @@ -223,14 +227,14 @@ #interrupt-cells = <2>; }; - wdog@53f98000 { /* WDOG1 */ + wdog1: wdog@53f98000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; clocks = <&clks 0>; }; - wdog@53f9c000 { /* WDOG2 */ + wdog2: wdog@53f9c000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; @@ -238,7 +242,7 @@ status = "disabled"; }; - iomuxc@53fa8000 { + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -338,6 +342,24 @@ }; }; + can1 { + pinctrl_can1_1: can1grp-1 { + fsl,pins = < + 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */ + 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ + >; + }; + }; + + can2 { + pinctrl_can2_1: can2grp-1 { + fsl,pins = < + 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */ + 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */ + >; + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < @@ -356,6 +378,15 @@ }; }; + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = < + 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */ + 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -391,6 +422,25 @@ >; }; }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */ + 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */ + >; + }; + }; + + uart5 { + pinctrl_uart5_1: uart5grp-1 { + fsl,pins = < + 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */ + 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */ + >; + }; + }; + }; pwm1: pwm@53fb4000 { @@ -484,7 +534,7 @@ #interrupt-cells = <2>; }; - i2c@53fec000 { /* I2C3 */ + i2c3: i2c@53fec000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; @@ -520,7 +570,7 @@ status = "disabled"; }; - ecspi@63fac000 { /* ECSPI2 */ + ecspi2: ecspi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -531,7 +581,7 @@ status = "disabled"; }; - sdma@63fb0000 { + sdma: sdma@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; @@ -540,7 +590,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - cspi@63fc0000 { + cspi: cspi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; @@ -551,7 +601,7 @@ status = "disabled"; }; - i2c@63fc4000 { /* I2C2 */ + i2c2: i2c@63fc4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; @@ -561,7 +611,7 @@ status = "disabled"; }; - i2c@63fc8000 { /* I2C1 */ + i2c1: i2c@63fc8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; @@ -581,13 +631,13 @@ status = "disabled"; }; - audmux@63fd0000 { + audmux: audmux@63fd0000 { compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; reg = <0x63fd0000 0x4000>; status = "disabled"; }; - nand@63fdb000 { + nfc: nand@63fdb000 { compatible = "fsl,imx53-nand"; reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; interrupts = <8>; @@ -605,7 +655,7 @@ status = "disabled"; }; - ethernet@63fec000 { + fec: ethernet@63fec000 { compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts new file mode 100644 index 000000000000..826e4ad1477e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Automotive Board"; + compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + soc { + aips-bus@02000000 { /* AIPS1 */ + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ + 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + >; + }; + }; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + uart4: serial@021f0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; + }; + + ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index e596c28c214d..a42402562b7b 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -38,6 +38,8 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < + 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ + 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ @@ -73,4 +75,20 @@ }; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 0>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 0>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index cce1d874c7a5..d6265ca97119 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -36,6 +36,14 @@ compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + cpu0-supply = <®_cpu>; }; cpu@1 { @@ -100,7 +108,7 @@ clocks = <&clks 106>; }; - gpmi-nand@00112000 { + nfc: gpmi-nand@00112000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -144,12 +152,12 @@ reg = <0x02000000 0x40000>; ranges; - spdif@02004000 { + spdif: spdif@02004000 { reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; }; - ecspi@02008000 { /* eCSPI1 */ + ecspi1: ecspi@02008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -160,7 +168,7 @@ status = "disabled"; }; - ecspi@0200c000 { /* eCSPI2 */ + ecspi2: ecspi@0200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -171,7 +179,7 @@ status = "disabled"; }; - ecspi@02010000 { /* eCSPI3 */ + ecspi3: ecspi@02010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -182,7 +190,7 @@ status = "disabled"; }; - ecspi@02014000 { /* eCSPI4 */ + ecspi4: ecspi@02014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -193,7 +201,7 @@ status = "disabled"; }; - ecspi@02018000 { /* eCSPI5 */ + ecspi5: ecspi@02018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +221,7 @@ status = "disabled"; }; - esai@02024000 { + esai: esai@02024000 { reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; }; @@ -248,7 +256,7 @@ status = "disabled"; }; - asrc@02034000 { + asrc: asrc@02034000 { reg = <0x02034000 0x4000>; interrupts = <0 50 0x04>; }; @@ -258,7 +266,7 @@ }; }; - vpu@02040000 { + vpu: vpu@02040000 { reg = <0x02040000 0x3c000>; interrupts = <0 3 0x04 0 12 0x04>; }; @@ -267,7 +275,7 @@ reg = <0x0207c000 0x4000>; }; - pwm@02080000 { /* PWM1 */ + pwm1: pwm@02080000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; @@ -276,7 +284,7 @@ clock-names = "ipg", "per"; }; - pwm@02084000 { /* PWM2 */ + pwm2: pwm@02084000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; @@ -285,7 +293,7 @@ clock-names = "ipg", "per"; }; - pwm@02088000 { /* PWM3 */ + pwm3: pwm@02088000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; @@ -294,7 +302,7 @@ clock-names = "ipg", "per"; }; - pwm@0208c000 { /* PWM4 */ + pwm4: pwm@0208c000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; @@ -303,17 +311,17 @@ clock-names = "ipg", "per"; }; - flexcan@02090000 { /* CAN1 */ + can1: flexcan@02090000 { reg = <0x02090000 0x4000>; interrupts = <0 110 0x04>; }; - flexcan@02094000 { /* CAN2 */ + can2: flexcan@02094000 { reg = <0x02094000 0x4000>; interrupts = <0 111 0x04>; }; - gpt@02098000 { + gpt: gpt@02098000 { compatible = "fsl,imx6q-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; @@ -389,19 +397,19 @@ #interrupt-cells = <2>; }; - kpp@020b8000 { + kpp: kpp@020b8000 { reg = <0x020b8000 0x4000>; interrupts = <0 82 0x04>; }; - wdog@020bc000 { /* WDOG1 */ + wdog1: wdog@020bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; clocks = <&clks 0>; }; - wdog@020c0000 { /* WDOG2 */ + wdog2: wdog@020c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; @@ -463,7 +471,7 @@ anatop-max-voltage = <2750000>; }; - regulator-vddcore@140 { + reg_cpu: regulator-vddcore@140 { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -521,27 +529,35 @@ }; snvs@020cc000 { - reg = <0x020cc000 0x4000>; - interrupts = <0 19 0x04 0 20 0x04>; + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; }; - epit@020d0000 { /* EPIT1 */ + epit1: epit@020d0000 { /* EPIT1 */ reg = <0x020d0000 0x4000>; interrupts = <0 56 0x04>; }; - epit@020d4000 { /* EPIT2 */ + epit2: epit@020d4000 { /* EPIT2 */ reg = <0x020d4000 0x4000>; interrupts = <0 57 0x04>; }; - src@020d8000 { + src: src@020d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; }; - gpc@020dc000 { + gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 0x04 0 90 0x04>; @@ -552,7 +568,7 @@ reg = <0x020e0000 0x38>; }; - iomuxc@020e0000 { + iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; @@ -765,17 +781,17 @@ }; }; - dcic@020e4000 { /* DCIC1 */ + dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 0x04>; }; - dcic@020e8000 { /* DCIC2 */ + dcic2: dcic@020e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 125 0x04>; }; - sdma@020ec000 { + sdma: sdma@020ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; @@ -801,7 +817,7 @@ reg = <0x0217c000 0x4000>; }; - usb@02184000 { /* USB OTG */ + usbotg: usb@02184000 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; @@ -811,7 +827,7 @@ status = "disabled"; }; - usb@02184200 { /* USB1 */ + usbh1: usb@02184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; @@ -821,7 +837,7 @@ status = "disabled"; }; - usb@02184400 { /* USB2 */ + usbh2: usb@02184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; @@ -830,7 +846,7 @@ status = "disabled"; }; - usb@02184600 { /* USB3 */ + usbh3: usb@02184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; @@ -839,14 +855,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks 162>; }; - ethernet@02188000 { + fec: ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; @@ -860,43 +876,47 @@ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; }; - usdhc@02190000 { /* uSDHC1 */ + usdhc1: usdhc@02190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; clocks = <&clks 163>, <&clks 163>, <&clks 163>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@02194000 { /* uSDHC2 */ + usdhc2: usdhc@02194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; clocks = <&clks 164>, <&clks 164>, <&clks 164>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@02198000 { /* uSDHC3 */ + usdhc3: usdhc@02198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; clocks = <&clks 165>, <&clks 165>, <&clks 165>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@0219c000 { /* uSDHC4 */ + usdhc4: usdhc@0219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; clocks = <&clks 166>, <&clks 166>, <&clks 166>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - i2c@021a0000 { /* I2C1 */ + i2c1: i2c@021a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -906,7 +926,7 @@ status = "disabled"; }; - i2c@021a4000 { /* I2C2 */ + i2c2: i2c@021a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -916,7 +936,7 @@ status = "disabled"; }; - i2c@021a8000 { /* I2C3 */ + i2c3: i2c@021a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -930,12 +950,12 @@ reg = <0x021ac000 0x4000>; }; - mmdc@021b0000 { /* MMDC0 */ + mmdc0: mmdc@021b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - mmdc@021b4000 { /* MMDC1 */ + mmdc1: mmdc@021b4000 { /* MMDC1 */ reg = <0x021b4000 0x4000>; }; @@ -963,7 +983,7 @@ interrupts = <0 109 0x04>; }; - audmux@021d8000 { + audmux: audmux@021d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi new file mode 100644 index 000000000000..d6c9d65cbaeb --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -0,0 +1,44 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6281-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi new file mode 100644 index 000000000000..9ae2004d5675 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -0,0 +1,45 @@ +/ { + ocp@f1000000 { + + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6282-pinctrl"; + reg = <0x10000 0x20>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + + i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi new file mode 100644 index 000000000000..3271e4c8ea07 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -0,0 +1,31 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,98dx4122-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 9b32d0272825..6875ac00c174 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; @@ -35,7 +36,116 @@ 6000 2>; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 4 0>; + }; + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart1 + &pmx_sata0 &pmx_sata1 + &pmx_led_power + &pmx_led_red_right_hdd + &pmx_led_red_left_hdd + &pmx_led_red_usb_325 + &pmx_button_power + &pmx_led_red_usb_320 + &pmx_power_off &pmx_power_back_on + &pmx_power_sata0 &pmx_power_sata1 + &pmx_present_sata0 &pmx_present_sata1 + &pmx_led_white_usb &pmx_fan_tacho + &pmx_fan_high_speed &pmx_fan_low_speed + &pmx_button_unmount &pmx_button_reset + &pmx_temp_alarm >; + pinctrl-names = "default"; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + pmx_led_red_right_hdd: pmx-led-red-right-hdd { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_led_red_left_hdd: pmx-led-red-left-hdd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_325: pmx-led-red-usb-325 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_320: pmx-led-red-usb-320 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_power_back_on: pmx-power-back-on { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_power_sata0: pmx-power-sata0 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_power_sata1: pmx-power-sata1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_present_sata0: pmx-present-sata0 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_present_sata1: pmx-present-sata1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_white_usb: pmx-led-white-usb { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_fan_tacho: pmx-fan-tacho { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_fan_high_speed: pmx-fan-high-speed { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_fan_low_speed: pmx-fan-low-speed { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_button_unmount: pmx-button-unmount { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_temp_alarm: pmx-temp-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -43,6 +153,7 @@ nand@3000000 { status = "okay"; + chip-delay = <35>; partition@0 { label = "u-boot"; @@ -76,4 +187,33 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 7 0>; + }; + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 8 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 08a582414b88..2e3dd34e21a5 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; @@ -16,6 +17,25 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable + &pmx_led_green &pmx_led_orange >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led-green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -54,4 +74,21 @@ gpios = <&gpio1 15 1>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 26e281fbf6bc..f2d386c95b07 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; @@ -16,6 +17,26 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_spi + &pmx_led_bluetooth &pmx_led_wifi + &pmx_led_wifi_ap >; + pinctrl-names = "default"; + + pmx_led_bluetooth: pmx-led-bluetooth { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wifi: pmx-led-wifi { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wifi_ap: pmx-led-wifi-ap { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 7c8238fbb6f9..1b133e0c566e 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; @@ -16,6 +17,61 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_0: pmx-led_right_cap_0 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_1: pmx-led_right_cap_1 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_2: pmx-led_right_cap_2 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_3: pmx-led_right_cap_3 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_0: pmx-led_left_cap_0 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_1: pmx-led_left_cap_1 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_2: pmx-led_left_cap_2 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_3: pmx-led_left_cap_3 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led_orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -96,4 +152,21 @@ gpios = <&gpio1 9 0>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 66794ed75ff1..71902da33d63 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; @@ -16,6 +17,39 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand + &pmx_led_os_red &pmx_power_off + &pmx_led_os_green &pmx_led_usb_transfer + &pmx_button_reset &pmx_button_usb_copy >; + pinctrl-names = "default"; + + pmx_led_os_red: pmx-led-os-red { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_os_green: pmx-led-os-green { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + pmx_led_usb_transfer: pmx-led-usb-transfer { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_button_usb_copy: pmx-button-usb-copy { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "okay"; @@ -79,4 +113,10 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 0>; + }; + + }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index d97cd9d4753e..504f16be8b54 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +19,56 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35 + &pmx_gpio_41 &pmx_gpio_42 + &pmx_gpio_43 &pmx_gpio_44 + &pmx_gpio_45 &pmx_gpio_46 + &pmx_gpio_47 &pmx_gpio_48 >; + pinctrl-names = "default"; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_35: pmx-gpio-35 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_gpio_41: pmx-gpio-41 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_gpio_42: pmx-gpio-42 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_gpio_43: pmx-gpio-43 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_gpio_44: pmx-gpio-44 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_gpio_45: pmx-gpio-45 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_gpio_46: pmx-gpio-46 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_gpio_47: pmx-gpio-47 { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_gpio_48: pmx-gpio-48 { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 865aeec40a26..6cae4599c4b3 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; @@ -16,6 +17,94 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_button_reset &pmx_button_power + &pmx_led_backup &pmx_led_power + &pmx_button_otb &pmx_led_rebuild + &pmx_led_health + &pmx_led_sata_brt_ctrl_1 + &pmx_led_sata_brt_ctrl_2 + &pmx_led_backup_brt_ctrl_1 + &pmx_led_backup_brt_ctrl_2 + &pmx_led_power_brt_ctrl_1 + &pmx_led_power_brt_ctrl_2 + &pmx_led_health_brt_ctrl_1 + &pmx_led_health_brt_ctrl_2 + &pmx_led_rebuild_brt_ctrl_1 + &pmx_led_rebuild_brt_ctrl_2 >; + pinctrl-names = "default"; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_led_backup: pmx-led-backup { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_button_otb: pmx-button-otb { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_rebuild: pmx-led-rebuild { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_health: pmx-led_health { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 75bdb93fed26..8db3123ac80f 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -16,6 +17,22 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda + &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 798e60eeedf3..37d45c4f88fb 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,71 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus + &pmx_fan_low &pmx_fan_high + &pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_fan_lock &pmx_button_function + &pmx_power_switch &pmx_power_auto_switch + &pmx_led_function_blue >; + pinctrl-names = "default"; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp10"; + marvell,function = "gpo"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp18"; + marvell,function = "gpo"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp19"; + marvell,function = "gpo"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function_red { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; sata@80000 { status = "okay"; nr-ports = <1>; @@ -105,4 +171,33 @@ 5000 0>; alarm-gpios = <&gpio1 8 0>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 11 0>; + }; + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 10 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index ac3c080bed21..262c65403760 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "MPL CEC4"; @@ -16,6 +17,64 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_led_health &pmx_sdio + &pmx_sata0 &pmx_sata1 + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + &pmx_sdio_cd + >; + pinctrl-names = "default"; + + pmx_led_health: pmx-led-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp34"; + marvell,function = "sata1"; + }; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp35"; + marvell,function = "sata0"; + }; + + pmx_led_user1o: pmx-led-user1o { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_user1g: pmx-led-user1g { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_user0o: pmx-led-user0o { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_led_user0g: pmx-led-user0g { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_led_misc: pmx-led-misc { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 9a2606c8b78f..49d3d74d4d38 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" / { model = "Plat'Home OpenBlocksA6"; @@ -29,11 +30,69 @@ nand@3000000 { chip-delay = <25>; status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x90000>; + }; + + partition@90000 { + label = "env"; + reg = <0x90000 0x44000>; + }; + + partition@d4000 { + label = "test"; + reg = <0xd4000 0x24000>; + }; + + partition@f4000 { + label = "conf"; + reg = <0xf4000 0x400000>; + }; + + partition@4f4000 { + label = "linux"; + reg = <0x4f4000 0x1d20000>; + }; + + partition@2214000 { + label = "user"; + reg = <0x2214000 0x1dec000>; + }; }; sata@80000 { nr-ports = <1>; status = "okay"; }; + + i2c@11100 { + status = "okay"; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; }; + + gpio-leds { + compatible = "gpio-leds"; + + led-red { + label = "obsa6:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa6:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa6:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index ccbf32757800..8295c833887f 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6281.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index fbe9932161a1..df3f95dfba33 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6282.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 4e5b8154a5be..a990c30f0a26 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -4,6 +4,10 @@ compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -24,7 +28,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <35>, <36>, <37>, <38>; }; @@ -33,7 +38,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10140 0x40>; - ngpio = <18>; + ngpios = <18>; + interrupt-controller; interrupts = <39>, <40>, <41>; }; @@ -77,6 +83,13 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + status = "okay"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index e5ffe960dbf3..1582f484a867 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -182,6 +182,13 @@ pnx,timeout = <0x64>; }; + mpwm: mpwm@400E8000 { + compatible = "nxp,lpc3220-motor-pwm"; + reg = <0x400E8000 0x78>; + status = "disabled"; + #pwm-cells = <2>; + }; + i2cusb: i2c@31020300 { compatible = "nxp,pnx-i2c"; reg = <0x31020300 0x100>; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index c6f85f0bc531..27f31a5fa494 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -14,7 +14,7 @@ / { model = "Calao Systems Snowball platform with device tree"; - compatible = "calaosystems,snowball-a9500"; + compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; memory { reg = <0x00000000 0x20000000>; @@ -147,10 +147,10 @@ }; // External Micro SD slot - sdi@80126000 { + sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; - bus-width = <8>; + bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; @@ -161,7 +161,7 @@ }; // On-board eMMC - sdi@80114000 { + sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <8>; @@ -214,5 +214,137 @@ cpufreq-cooling { status = "okay"; }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi new file mode 100644 index 000000000000..39446a247e79 --- /dev/null +++ b/arch/arm/boot/dts/stuib.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc-u9500 { + i2c@80004000 { + stmpe1601: stmpe1601@40 { + compatible = "st,stmpe1601"; + reg = <0x40>; + interrupts = <26 0x1>; + interrupt-parent = <&gpio6>; + interrupt-controller; + + wakeup-source; + st,autosleep-timeout = <1024>; + + stmpe_keypad { + compatible = "st,stmpe-keypad"; + + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + + linux,keymap = <0x205006b + 0x4010074 + 0x3050072 + 0x1030004 + 0x502006a + 0x500000a + 0x5008b + 0x706001c + 0x405000b + 0x6070003 + 0x3040067 + 0x303006c + 0x60400e7 + 0x602009e + 0x4020073 + 0x5050002 + 0x4030069 + 0x3020008>; + }; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + compatible = "rhom,bu21013_tp"; + reg = <0x5c>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + + bu21013_tp@0x5d { + compatible = "rhom,bu21013_tp"; + reg = <0x5d>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 74b8a47adf91..43eb72af8948 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -262,9 +274,9 @@ }; }; - i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2c@7000c500 { @@ -369,13 +381,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -396,6 +408,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; }; pmc { diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 331a3ef24d59..289480026fbf 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -6,6 +6,12 @@ model = "Avionic Design Plutux board"; compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + host1x { + hdmi { + status = "okay"; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e58a0e60f711..420459825b46 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -561,6 +561,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 5b3d8b157b33..a239ccdfaa52 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -8,6 +8,16 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -62,10 +72,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; dta { nvidia,pins = "dta", "dtd"; nvidia,function = "sdio2"; @@ -91,7 +97,7 @@ nvidia,function = "pcie"; }; hdint { - nvidia,pins = "hdint", "pta"; + nvidia,pins = "hdint"; nvidia,function = "hdmi"; }; i2cp { @@ -230,6 +236,39 @@ nvidia,pull = <1>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -246,6 +285,36 @@ status = "okay"; }; + i2c@7000c400 { + clock-frequency = <100000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c@7000d000 { clock-frequency = <400000>; status = "okay"; @@ -348,13 +417,13 @@ regulator-max-microvolt = <2850000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -381,6 +450,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; }; pmc { diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 9aff31b0fe4a..402b21004bef 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -6,10 +6,13 @@ model = "Avionic Design Tamonten Evaluation Carrier"; compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; - i2c@7000c000 { - clock-frequency = <400000>; - status = "okay"; + host1x { + hdmi { + status = "okay"; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 27fb8a67ea42..b70b4cb754c8 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -249,14 +261,24 @@ clock-frequency = <216000000>; }; - i2c@7000c000 { + dvi_ddc: i2c@7000c000 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; - i2c@7000c400 { + spi@7000c380 { status = "okay"; - clock-frequency = <400000>; + spi-max-frequency = <48000000>; + spi-flash@0 { + compatible = "winbond,w25q80bl"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + }; + + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; }; i2c@7000c500 { @@ -300,6 +322,30 @@ bus-width = <4>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_vdd_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_pll_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 86854f1abd58..adc47547eaae 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -64,11 +64,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -98,7 +93,7 @@ nvidia,function = "pcie"; }; hdint { - nvidia,pins = "hdint", "pta"; + nvidia,pins = "hdint"; nvidia,function = "hdmi"; }; i2cp { @@ -129,6 +124,10 @@ "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; @@ -237,6 +236,49 @@ "ld23_22"; nvidia,pull = <1>; }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <3>; + nvidia,slew-rate-falling = <3>; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; }; }; @@ -281,6 +323,31 @@ clock-frequency = <400000>; }; + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; @@ -406,6 +473,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; }; pmc { @@ -425,6 +497,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 94a71c91beb5..20d576ecd555 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -246,6 +258,11 @@ clock-frequency = <216000000>; }; + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <100000>; @@ -356,7 +373,7 @@ regulator-always-on; }; - ldo6 { + hdmi_pll_reg: ldo6 { regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -388,7 +405,7 @@ regulator-always-on; }; - ldo11 { + hdmi_vdd_reg: ldo11 { regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f40cfbaa7c7e..fba998e3954a 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,93 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + }; + + vi { + compatible = "nvidia,tegra20-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + }; + + epp { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + }; + + isp { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + }; + + gr2d { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + }; + + gr3d { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; @@ -147,6 +234,16 @@ status = "disabled"; }; + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <0 39 0x04>; + nvidia,dma-request-selector = <&apbdma 11>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c@7000c400 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; @@ -174,6 +271,46 @@ status = "disabled"; }; + spi@7000d400 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d480 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index dd4222f00eca..adc88aa50eb6 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -83,5 +83,11 @@ gpio = <&gpio 83 0>; /* GPIO PK3 */ }; }; + + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio 28 0>; /* gpio PD4 */ + bus-width = <4>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 0828f097ca86..08163e145d57 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -95,4 +95,10 @@ gpio = <&gpio 232 0>; /* GPIO PDD0 */ }; }; + + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio 27 0>; /* gpio PD3 */ + bus-width = <4>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index b1271a894327..bdb2a660f376 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -52,6 +52,22 @@ nvidia,pull = <2>; nvidia,tristate = <0>; }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; @@ -81,6 +97,15 @@ nvidia,pull = <0>; nvidia,tristate = <0>; }; + sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <0>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <1>; + nvidia,slew-rate-falling = <1>; + }; }; }; @@ -250,6 +275,16 @@ }; }; + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + ahub { i2s@70080400 { status = "okay"; @@ -384,6 +419,8 @@ regulator-name = "vdd_com"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; enable-active-high; gpio = <&gpio 24 0>; /* gpio PD0 */ vin-supply = <&sys_3v3_reg>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fed8dca1692d..efa603d47a6a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,93 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + host1x { + compatible = "nvidia,tegra30-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra30-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + }; + + vi { + compatible = "nvidia,tegra30-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + }; + + epp { + compatible = "nvidia,tegra30-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + }; + + isp { + compatible = "nvidia,tegra30-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + }; + + gr2d { + compatible = "nvidia,tegra30-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + }; + + gr3d { + compatible = "nvidia,tegra30-gr3d"; + reg = <0x54180000 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra30-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra30-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra30-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; @@ -177,6 +264,66 @@ status = "disabled"; }; + spi@7000d400 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d480 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts new file mode 100644 index 000000000000..95892ec6c342 --- /dev/null +++ b/arch/arm/boot/dts/u9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson U9540 platform with Device Tree"; + compatible = "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi new file mode 100644 index 000000000000..401c1262d4ed --- /dev/null +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/include/ "skeleton.dtsi" + +/ { + compatible = "xlnx,zynq-7000"; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + arm,data-latency = <2 3 2>; + arm,tag-latency = <2 3 2>; + cache-unified; + cache-level = <2>; + }; + + uart0: uart@e0000000 { + compatible = "xlnx,xuartps"; + reg = <0xE0000000 0x1000>; + interrupts = <0 27 4>; + clock = <50000000>; + }; + + uart1: uart@e0001000 { + compatible = "xlnx,xuartps"; + reg = <0xE0001000 0x1000>; + interrupts = <0 50 4>; + clock = <50000000>; + }; + + slcr: slcr@f8000000 { + compatible = "xlnx,zynq-slcr"; + reg = <0xF8000000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ps_clk: ps_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* clock-frequency set in board-specific file */ + clock-output-names = "ps_clk"; + }; + armpll: armpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x100 0x110>; + clock-output-names = "armpll"; + }; + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x104 0x114>; + clock-output-names = "ddrpll"; + }; + iopll: iopll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x108 0x118>; + clock-output-names = "iopll"; + }; + uart_clk: uart_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-periph-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x154>; + clock-output-names = "uart0_ref_clk", + "uart1_ref_clk"; + }; + cpu_clk: cpu_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-cpu-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x120 0x1C4>; + clock-output-names = "cpu_6x4x", + "cpu_3x2x", + "cpu_2x", + "cpu_1x"; + }; + }; + }; + + ttc0: ttc0@f8001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,ttc"; + reg = <0xF8001000 0x1000>; + clocks = <&cpu_clk 3>; + clock-names = "cpu_1x"; + clock-ranges; + + ttc0_0: ttc0.0 { + status = "disabled"; + reg = <0>; + interrupts = <0 10 4>; + }; + ttc0_1: ttc0.1 { + status = "disabled"; + reg = <1>; + interrupts = <0 11 4>; + }; + ttc0_2: ttc0.2 { + status = "disabled"; + reg = <2>; + interrupts = <0 12 4>; + }; + }; + + ttc1: ttc1@f8002000 { + #interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,ttc"; + reg = <0xF8002000 0x1000>; + clocks = <&cpu_clk 3>; + clock-names = "cpu_1x"; + clock-ranges; + + ttc1_0: ttc1.0 { + status = "disabled"; + reg = <0>; + interrupts = <0 37 4>; + }; + ttc1_1: ttc1.1 { + status = "disabled"; + reg = <1>; + interrupts = <0 38 4>; + }; + ttc1_2: ttc1.2 { + status = "disabled"; + reg = <2>; + interrupts = <0 39 4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts deleted file mode 100644 index 574bc044f572..000000000000 --- a/arch/arm/boot/dts/zynq-ep107.dts +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/dts-v1/; -/ { - model = "Xilinx Zynq EP107"; - compatible = "xlnx,zynq-ep107"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - memory { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - chosen { - bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk"; - linux,stdout-path = &uart0; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - intc: interrupt-controller@f8f01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0xF8F01000 0x1000>, - <0xF8F00100 0x100>; - }; - - L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xF8F02000 0x1000>; - arm,data-latency = <2 3 2>; - arm,tag-latency = <2 3 2>; - cache-unified; - cache-level = <2>; - }; - - uart0: uart@e0000000 { - compatible = "xlnx,xuartps"; - reg = <0xE0000000 0x1000>; - interrupts = <0 27 4>; - clock = <50000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts new file mode 100644 index 000000000000..c772942a399a --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq ZC702 Development Board"; + compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS1,115200 earlyprintk"; + }; + +}; + +&ps_clk { + clock-frequency = <33333330>; +}; + +&ttc0_0 { + status = "ok"; + compatible = "xlnx,ttc-counter-clocksource"; +}; + +&ttc0_1 { + status = "ok"; + compatible = "xlnx,ttc-counter-clockevent"; +}; |
