Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

18 files changed, 130 insertions, 53 deletions

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 84aa2caf07ed..ec2f8065f955 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -95,24 +95,24 @@ initrd:
 	@test "$(INITRD)" != "" || \
 	(echo You must specify INITRD; exit -1)
 
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/zImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
-uinstall: $(obj)/uImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+uinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
 zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
 i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e95af3f5433b..802720e3e8fd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 05e4485a8225..8ac2ac1f69cc 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -27,6 +27,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -57,6 +76,11 @@
 					marvell,pins = "mpp56";
 					marvell,function = "gpio";
 				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
 			};
 
 			mdio {
@@ -89,22 +113,6 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Connected to Marvell SATA controller */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected to FL1009 USB 3.0 controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 
@@ -160,7 +168,7 @@
 		button@1 {
 			label = "Power Button";
 			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 1>;
+			gpios = <&gpio1 30 0>;
 		};
 
 		button@2 {
@@ -176,4 +184,11 @@
 		};
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index def125c0eeaa..3058522f5aad 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -70,6 +70,8 @@
 
 			timer@20300 {
 				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -169,4 +171,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index cf78ac0b04b1..e74dc15efa9d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -556,6 +556,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -567,6 +568,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 8678e0c11119..6db4f81d4795 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -181,6 +181,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +201,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +210,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +221,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +247,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 7d7cc777ff7b..bbac42a78ce5 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -96,6 +96,11 @@
 			     <1 14 0xf08>,
 			     <1 11 0xf08>,
 			     <1 10 0xf08>;
+		/* Unfortunately we need this since some versions of U-Boot
+		 * on Exynos don't set the CNTFRQ register, so we need the
+		 * value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
 
 	mct@101C0000 {
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index ff1aea0ee043..72693a69f830 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -9,11 +9,6 @@
 	model = "ARM Integrator/CP";
 	compatible = "arm,integrator-cp";
 
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
 	chosen {
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
@@ -24,14 +19,18 @@
 	};
 
 	timer0: timer@13000000 {
+		/* TIMER0 runs @ 25MHz */
 		compatible = "arm,integrator-cp-timer";
+		status = "disabled";
 	};
 
 	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
 	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index cf7aeaf89e9c..1335b2e1bed4 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -13,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -167,7 +168,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 0c514dc8460c..2816bf612672 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda1fae4..b41bd57f4328 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -108,7 +108,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		omap3_pmx_wkup: pinmux@0x48002a00 {
@@ -117,7 +117,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		gpio1: gpio@48310000 {
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index bbeb623fc2c6..27ed9f5144bc 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -171,7 +171,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +197,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +230,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +241,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +252,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +278,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 6c26caa880f2..658fcc537576 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -193,7 +193,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -202,7 +202,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -211,7 +211,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 45ac404ab6d8..3577aba82583 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -96,6 +96,5 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7778";
 		reg = <0xfffc000 0x118>;
-		#gpio-range-cells = <3>;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 23a62447359c..ebbe507fcbfa 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -188,7 +188,6 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
-		#gpio-range-cells = <3>;
 	};
 
 	thermal@ffc48000 {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 3b879e7c697c..413b4c29e782 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -148,11 +148,10 @@
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7790";
 		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -161,7 +160,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -170,7 +169,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;
@@ -179,7 +178,7 @@
 	};
 
 	sdhi3: sdhi@ee160000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 4>;
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index ba59a5875a10..3955c7606a6f 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -196,7 +196,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee100000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 83 4
@@ -208,7 +208,7 @@
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee120000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 88 4
@@ -219,7 +219,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee140000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 104 4
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 06ea7d42ce8e..2a45092a40e3 100644
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi