Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

1 files changed, 188 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 56fc214e6d2c..4676f25e87a7 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -15,7 +15,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr.h>
 
 / {
 	#address-cells = <1>;
@@ -75,7 +76,14 @@
 			pdma: pdma@ffe01000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0xffe01000 0x1000>;
-				interrupts = <0 180 4>;
+				interrupts = <0 104 4>,
+					     <0 105 4>,
+					     <0 106 4>,
+					     <0 107 4>,
+					     <0 108 4>,
+					     <0 109 4>,
+					     <0 110 4>,
+					     <0 111 4>;
 				#dma-cells = <1>;
 				#dma-channels = <8>;
 				#dma-requests = <32>;
@@ -84,6 +92,22 @@
 			};
 		};
 
+		can0: can@ffc00000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc00000 0x1000>;
+			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+			clocks = <&can0_clk>;
+			status = "disabled";
+		};
+
+		can1: can@ffc01000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc01000 0x1000>;
+			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+			clocks = <&can1_clk>;
+			status = "disabled";
+		};
+
 		clkmgr@ffd04000 {
 				compatible = "altr,clk-mgr";
 				reg = <0xffd04000 0x1000>;
@@ -124,7 +148,7 @@
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
-							fixed-divider = <2>;
+							div-reg = <0xe0 0 9>;
 							reg = <0x48>;
 						};
 
@@ -132,7 +156,7 @@
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
-							fixed-divider = <4>;
+							div-reg = <0xe4 0 9>;
 							reg = <0x4C>;
 						};
 
@@ -140,7 +164,7 @@
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
-							fixed-divider = <4>;
+							div-reg = <0xe8 0 9>;
 							reg = <0x50>;
 						};
 
@@ -460,6 +484,8 @@
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 			clocks = <&emac0_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -472,9 +498,111 @@
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 			clocks = <&emac1_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
 			status = "disabled";
 		};
 
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio0: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio1: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio2: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
 		L2: l2-cache@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
@@ -508,24 +636,32 @@
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 167 4>;
 			reg = <0xffc08000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer1: timer1@ffc09000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 168 4>;
 			reg = <0xffc09000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 169 4>;
 			reg = <0xffd00000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
 		};
 
 		timer3: timer3@ffd01000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 170 4>;
 			reg = <0xffd01000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -534,6 +670,7 @@
 			interrupts = <0 162 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 		};
 
 		uart1: serial1@ffc03000 {
@@ -542,13 +679,58 @@
 			interrupts = <0 163 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 		};
 
-		rstmgr@ffd05000 {
+		rst: rstmgr@ffd05000 {
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
 		};
 
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 125 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 128 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd02000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd02000 0x1000>;
+			interrupts = <0 171 4>;
+			clocks = <&osc1>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd03000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd03000 0x1000>;
+			interrupts = <0 172 4>;
+			clocks = <&osc1>;
+			status = "disabled";
+		};
+
 		sysmgr: sysmgr@ffd08000 {
 			compatible = "altr,sys-mgr", "syscon";
 			reg = <0xffd08000 0x4000>;