Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

1 files changed, 9 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index c5fb02f7ebc3..6ccc78866e6d 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -63,13 +63,13 @@
 
 		button@1 {
 			label = "USB Copy";
-			linux,code = <133>;
-			gpios = <&gpio0 29 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 		button@2 {
 			label = "Reset";
-			linux,code = <0x198>;
-			gpios = <&gpio0 28 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -81,16 +81,16 @@
 
 		green-os {
 			label = "ib62x0:green:os";
-			gpios = <&gpio0 25 0>;
-			linux,default-trigger = "default-on";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 		red-os {
 			label = "ib62x0:red:os";
-			gpios = <&gpio0 22 0>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
 		usb-copy {
 			label = "ib62x0:red:usb_copy";
-			gpios = <&gpio0 27 0>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -98,7 +98,7 @@
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&pmx_power_off>;
 		pinctrl-names = "default";
-		gpios = <&gpio0 24 0>;
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
 	};
 };