ARM: dts: imx: use nodes label in board dts

Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 59 insertions, 65 deletions

diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 5bfa02a3f85c..53eb241fa5ad 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -21,71 +21,6 @@
 		reg = <0x10000000 0x80000000>;
 	};
 
-	soc {
-		gpmi-nand@00112000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_gpmi_nand_1>;
-			status = "disabled"; /* gpmi nand conflicts with SD */
-		};
-
-		aips-bus@02000000 { /* AIPS1 */
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
-						>;
-					};
-				};
-
-				arm2 {
-					pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
-						fsl,pins = <
-							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
-							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_2>;
-				phy-mode = "rgmii";
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				cd-gpios = <&gpio6 11 0>;
-				wp-gpios = <&gpio6 14 0>;
-				vmmc-supply = <&reg_3p3v>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1
-					     &pinctrl_usdhc3_arm2>;
-				status = "okay";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				non-removable;
-				vmmc-supply = <&reg_3p3v>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc4_1>;
-				status = "okay";
-			};
-
-			uart4: serial@021f0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart4_1>;
-				status = "okay";
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 
@@ -108,3 +43,62 @@
 		};
 	};
 };
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+	status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+			>;
+		};
+	};
+
+	arm2 {
+		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+			fsl,pins = <
+				1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+				1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&usdhc3 {
+	cd-gpios = <&gpio6 11 0>;
+	wp-gpios = <&gpio6 14 0>;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_1
+		     &pinctrl_usdhc3_arm2>;
+	status = "okay";
+};
+
+&usdhc4 {
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_1>;
+	status = "okay";
+};