Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

1 files changed, 160 insertions, 52 deletions

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 5fbb01335a0f..21f748083586 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -15,6 +15,7 @@
 /dts-v1/;
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
@@ -24,6 +25,7 @@
 		i2c9 = &i2c_ak8975;
 		i2c10 = &i2c_cm36651;
 		i2c11 = &i2c_max77693;
+		i2c12 = &i2c_max77693_fuel;
 	};
 
 	memory {
@@ -57,15 +59,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
-
 		cam_io_reg: voltage-regulator-1 {
 			compatible = "regulator-fixed";
 			regulator-name = "CAM_SENSOR_A";
@@ -93,16 +86,6 @@
 			enable-active-high;
 		};
 
-		cam_isp_core_reg: voltage-regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_ISP_CORE_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpm0 3 0>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
 		ps_als_reg: voltage-regulator-5 {
 			compatible = "regulator-fixed";
 			regulator-name = "LED_A_3.0V";
@@ -204,6 +187,25 @@
 		};
 	};
 
+	i2c@138A0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c4_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		wm1811: wm1811@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+			clocks = <&pmu_system_controller 0>;
+			clock-names = "MCLK1";
+			DCVDD-supply = <&ldo3_reg>;
+			DBVDD1-supply = <&ldo3_reg>;
+			wlf,ldo1ena = <&gpj0 4 0>;
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -226,7 +228,6 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo2_reg: ldo2 {
@@ -235,7 +236,9 @@
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo3_reg: ldo3 {
@@ -244,7 +247,6 @@
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo4_reg: ldo4 {
@@ -253,7 +255,6 @@
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo5_reg: ldo5 {
@@ -262,7 +263,6 @@
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo6_reg: ldo6 {
@@ -271,7 +271,9 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo7_reg: ldo7 {
@@ -280,7 +282,9 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo8_reg: ldo8 {
@@ -288,7 +292,9 @@
 					regulator-name = "VMIPI_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo9_reg: ldo9 {
@@ -296,7 +302,6 @@
 					regulator-name = "CAM_ISP_MIPI_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
 				};
 
 				ldo10_reg: ldo10 {
@@ -304,7 +309,9 @@
 					regulator-name = "VMIPI_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo11_reg: ldo11 {
@@ -313,7 +320,9 @@
 					regulator-min-microvolt = <1950000>;
 					regulator-max-microvolt = <1950000>;
 					regulator-always-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo12_reg: ldo12 {
@@ -321,7 +330,9 @@
 					regulator-name = "VUOTG_3.0V";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo13_reg: ldo13 {
@@ -329,7 +340,6 @@
 					regulator-name = "NFC_AVDD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo14_reg: ldo14 {
@@ -338,7 +348,9 @@
 					regulator-min-microvolt = <1950000>;
 					regulator-max-microvolt = <1950000>;
 					regulator-always-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo15_reg: ldo15 {
@@ -346,7 +358,9 @@
 					regulator-name = "VHSIC_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo16_reg: ldo16 {
@@ -354,7 +368,9 @@
 					regulator-name = "VHSIC_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo17_reg: ldo17 {
@@ -362,7 +378,6 @@
 					regulator-name = "CAM_SENSOR_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
 				};
 
 				ldo18_reg: ldo18 {
@@ -370,7 +385,6 @@
 					regulator-name = "CAM_ISP_SEN_IO_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo19_reg: ldo19 {
@@ -378,7 +392,6 @@
 					regulator-name = "VT_CAM_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo20_reg: ldo20 {
@@ -386,7 +399,6 @@
 					regulator-name = "VDDQ_PRE_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo21_reg: ldo21 {
@@ -394,7 +406,7 @@
 					regulator-name = "VTF_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
+					maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 				};
 
 				ldo22_reg: ldo22 {
@@ -402,6 +414,7 @@
 					regulator-name = "VMEM_VDD_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
+					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 				};
 
 				ldo23_reg: ldo23 {
@@ -409,7 +422,6 @@
 					regulator-name = "TSP_AVDD_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-mem-idle;
 				};
 
 				ldo24_reg: ldo24 {
@@ -417,7 +429,6 @@
 					regulator-name = "TSP_VDD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo25_reg: ldo25 {
@@ -425,7 +436,6 @@
 					regulator-name = "LCD_VCC_3.3V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
 				};
 
 				ldo26_reg: ldo26 {
@@ -433,7 +443,6 @@
 					regulator-name = "MOTOR_VCC_3.0V";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					regulator-mem-idle;
 				};
 
 				buck1_reg: buck1 {
@@ -443,7 +452,9 @@
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck2_reg: buck2 {
@@ -453,7 +464,9 @@
 					regulator-max-microvolt = <1500000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				buck3_reg: buck3 {
@@ -463,7 +476,9 @@
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck4_reg: buck4 {
@@ -472,7 +487,9 @@
 					regulator-min-microvolt = <850000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck5_reg: buck5 {
@@ -504,6 +521,7 @@
 					regulator-name = "VMEM_VDDF_3.0V";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
+					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 				};
 
 				buck9_reg: buck9 {
@@ -511,7 +529,7 @@
 					regulator-name = "CAM_ISP_CORE_1.2V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-off;
+					maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 				};
 			};
 		};
@@ -550,6 +568,32 @@
 				haptic-supply = <&ldo26_reg>;
 				pwms = <&pwm 0 38022 0>;
 			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693-fuel-gauge@36 {
+			compatible = "maxim,max17047";
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			reg = <0x36>;
 		};
 	};
 
@@ -558,7 +602,7 @@
 		broken-cd;
 		non-removable;
 		card-detect-delay = <200>;
-		vmmc-supply = <&vemmc_reg>;
+		vmmc-supply = <&ldo22_reg>;
 		clock-frequency = <400000000>;
 		samsung,dw-mshc-ciu-div = <0>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -722,8 +766,8 @@
 		status = "okay";
 		assigned-clocks = <&clock CLK_MOUT_CAM0>,
 				  <&clock CLK_MOUT_CAM1>;
-		assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>,
-					 <&clock CLK_MOUT_MPLL_USER_T>;
+		assigned-clock-parents = <&clock CLK_XUSBXTI>,
+					 <&clock CLK_XUSBXTI>;
 
 		fimc_0: fimc@11800000 {
 			status = "okay";
@@ -839,6 +883,24 @@
 		};
 	};
 
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	sound {
+		compatible = "samsung,trats2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,model = "Trats2";
+		samsung,audio-codec = <&wm1811>;
+		samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+	};
+
 	exynos-usbphy@125B0000 {
 		status = "okay";
 	};
@@ -846,6 +908,7 @@
 	hsotg@12480000 {
 		vusb_d-supply = <&ldo15_reg>;
 		vusb_a-supply = <&ldo12_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 
@@ -866,6 +929,51 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+};
+
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
 &pinctrl_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;