Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

1 files changed, 40 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 861aa7d6fc7d..50ccd151091e 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -9,7 +9,10 @@
  */
 /dts-v1/;
 
-/include/ "emev2.dtsi"
+#include "emev2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "EMEV2 KZM9D Board";
@@ -47,11 +50,46 @@
 		reg = <0x20000000 0x10000>;
 		phy-mode = "mii";
 		interrupt-parent = <&gpio0>;
-		interrupts = <1 1>;	/* active high */
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
 		reg-io-width = <4>;
 		smsc,irq-active-high;
 		smsc,irq-push-pull;
 		vddvario-supply = <&reg_1p8v>;
 		vdd33a-supply = <&reg_3p3v>;
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-1";
+			linux,code = <KEY_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-2";
+			linux,code = <KEY_2>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-3";
+			linux,code = <KEY_3>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-4";
+			linux,code = <KEY_4>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };