ARM: at91: dt: at91sam9: add mmc pinctrl support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 91607d2ea2d7..0741caeeced1 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -240,6 +240,54 @@
 					};
 				};
 
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 0 0x1 0x0	/* PA0 periph A */
+							 0 1 0x1 0x1	/* PA1 periph A with pullup */
+							 0 2 0x1 0x1>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 3 0x1 0x1	/* PA3 periph A with pullup */
+							 0 4 0x1 0x1	/* PA4 periph A with pullup */
+							 0 5 0x1 0x1>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<0 6 0x1 0x1	/* PA6 periph A with pullup */
+							 0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 8 0x1 0x1	/* PA8 periph A with pullup */
+							 0 9 0x1 0x1>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 31 0x1 0x0	/* PA31 periph A */
+							 0 22 0x1 0x1	/* PA22 periph A with pullup */
+							 0 23 0x1 0x1>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 24 0x1 0x1	/* PA24 periph A with pullup */
+							 0 25 0x1 0x1	/* PA25 periph A with pullup */
+							 0 26 0x1 0x1>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<0 27 0x1 0x1	/* PA27 periph A with pullup */
+							 0 28 0x1 0x1	/* PA28 periph A with pullup */
+							 0 29 0x1 0x1	/* PA29 periph A with pullup */
+							 0 20 0x1 0x1>;	/* PA30 periph A with pullup */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;