ARM: dts: mvebu: introduce internal-regs node

Introduce a 'internal-regs' subnode, under which all devices are
moved. This is not really needed for now, but will be for the
mvebu-mbus driver. This generates a lot of code movement since it's
indenting by one more tab all the devices.  So it was a good
opportunity to fix all the bad indentation.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 155 insertions, 153 deletions

diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 1faacd13d514..f4029f015aff 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -45,177 +45,179 @@
 	};
 
 	soc {
-		pinctrl {
-			compatible = "marvell,mv78260-pinctrl";
-			reg = <0x18000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78260-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
 			};
-		};
 
-		gpio0: gpio@18100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0x18100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
 
-		gpio1: gpio@18140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0x18140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
-		};
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
 
-		gpio2: gpio@18180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0x18180 0x40>;
-			ngpios = <3>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
-		};
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
 
-		ethernet@34000 {
+			ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x34000 0x2500>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;
 				status = "disabled";
-		};
-
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-				  0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-				  0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-				  0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-				  0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				  0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-				  0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-				  0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
 			};
 
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
+			/*
+			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+			 * configured as x4 or quad x1 lanes. One unit is
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
 				status = "disabled";
-			};
-
-			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
 
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
 
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie@10,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+
+				pcie@10,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+					reg = <0x5000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 103>;
+					marvell,pcie-port = <3>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 27>;
+					status = "disabled";
+				};
 			};
 		};
 	};