Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 289 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
new file mode 100644
index 000000000000..61ac56f8eeea
--- /dev/null
+++ b/arch/alpha/kernel/sys_miata.c
@@ -0,0 +1,289 @@
+/*
+ *	linux/arch/alpha/kernel/sys_miata.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the MIATA (EV56+PYXIS).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void 
+miata_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * I really hate to do this, but the MIATA SRM console ignores the
+	 *  low 8 bits in the interrupt summary register, and reports the
+	 *  vector 0x80 *lower* than I expected from the bit numbering in
+	 *  the documentation.
+	 * This was done because the low 8 summary bits really aren't used
+	 *  for reporting any interrupts (the PCI-ISA bridge, bit 7, isn't
+	 *  used for this purpose, as PIC interrupts are delivered as the
+	 *  vectors 0x800-0x8f0).
+	 * But I really don't want to change the fixup code for allocation
+	 *  of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
+	 *  look nice and clean now.
+	 * So, here's this grotty hack... :-(
+	 */
+	if (irq >= 16)
+		irq = irq + 8;
+
+	handle_irq(irq, regs);
+}
+
+static void __init
+miata_init_irq(void)
+{
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = miata_srm_device_interrupt;
+
+#if 0
+	/* These break on MiataGL so we'll try not to do it at all.  */
+	*(vulp)PYXIS_INT_HILO = 0x000000B2UL; mb();	/* ISA/NMI HI */
+	*(vulp)PYXIS_RT_COUNT = 0UL; mb();		/* clear count */
+#endif
+
+	init_i8259a_irqs();
+
+	/* Not interested in the bogus interrupts (3,10), Fan Fault (0),
+           NMI (1), or EIDE (9).
+
+	   We also disable the risers (4,5), since we don't know how to
+	   route the interrupts behind the bridge.  */
+	init_pyxis_irqs(0x63b0000);
+
+	common_init_isa_dma();
+	setup_irq(16+2, &halt_switch_irqaction);	/* SRM only? */
+	setup_irq(16+6, &timer_cascade_irqaction);
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ PYXIS_INT_REQ:
+ * Bit      Meaning
+ * 0        Fan Fault
+ * 1        NMI
+ * 2        Halt/Reset switch
+ * 3        none
+ * 4        CID0 (Riser ID)
+ * 5        CID1 (Riser ID)
+ * 6        Interval timer
+ * 7        PCI-ISA Bridge
+ * 8        Ethernet
+ * 9        EIDE (deprecated, ISA 14/15 used)
+ *10        none
+ *11        USB
+ *12        Interrupt Line A from slot 4
+ *13        Interrupt Line B from slot 4
+ *14        Interrupt Line C from slot 4
+ *15        Interrupt Line D from slot 4
+ *16        Interrupt Line A from slot 5
+ *17        Interrupt line B from slot 5
+ *18        Interrupt Line C from slot 5
+ *19        Interrupt Line D from slot 5
+ *20        Interrupt Line A from slot 1
+ *21        Interrupt Line B from slot 1
+ *22        Interrupt Line C from slot 1
+ *23        Interrupt Line D from slot 1
+ *24        Interrupt Line A from slot 2
+ *25        Interrupt Line B from slot 2
+ *26        Interrupt Line C from slot 2
+ *27        Interrupt Line D from slot 2
+ *27        Interrupt Line A from slot 3
+ *29        Interrupt Line B from slot 3
+ *30        Interrupt Line C from slot 3
+ *31        Interrupt Line D from slot 3
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  3       DC21142 Ethernet
+ *  4       EIDE CMD646
+ *  5       none
+ *  6       USB
+ *  7       PCI-ISA bridge
+ *  8       PCI-PCI Bridge      (SBU Riser)
+ *  9       none
+ * 10       none
+ * 11       PCI on board slot 4 (SBU Riser)
+ * 12       PCI on board slot 5 (SBU Riser)
+ *
+ *  These are behind the bridge, so I'm not sure what to do...
+ *
+ * 13       PCI on board slot 1 (SBU Riser)
+ * 14       PCI on board slot 2 (SBU Riser)
+ * 15       PCI on board slot 3 (SBU Riser)
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int __init
+miata_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        static char irq_tab[18][5] __initdata = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8},  /* IdSel 14,  DC21142 */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 15,  EIDE    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCI-ISA */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PCI-PCI */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  none    */
+		{16+12, 16+12, 16+13, 16+14, 16+15},  /* IdSel 22,  slot 4  */
+		{16+16, 16+16, 16+17, 16+18, 16+19},  /* IdSel 23,  slot 5  */
+		/* the next 7 are actually on PCI bus 1, across the bridge */
+		{16+11, 16+11, 16+11, 16+11, 16+11},  /* IdSel 24,  QLISP/GL*/
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 25,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 26,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 27,  none    */
+		{16+20, 16+20, 16+21, 16+22, 16+23},  /* IdSel 28,  slot 1  */
+		{16+24, 16+24, 16+25, 16+26, 16+27},  /* IdSel 29,  slot 2  */
+		{16+28, 16+28, 16+29, 16+30, 16+31},  /* IdSel 30,  slot 3  */
+		/* This bridge is on the main bus of the later orig MIATA */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 31,  PCI-PCI */
+        };
+	const long min_idsel = 3, max_idsel = 20, irqs_per_slot = 5;
+	
+	/* the USB function of the 82c693 has it's interrupt connected to 
+           the 2nd 8259 controller. So we have to check for it first. */
+
+	if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
+		u8 irq=0;
+
+		if(pci_read_config_byte(pci_find_slot(dev->bus->number, dev->devfn & ~(7)), 0x40,&irq)!=PCIBIOS_SUCCESSFUL)
+			return -1;
+		else	
+			return irq;
+	}
+
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8 __init
+miata_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}		
+	/* Check for the built-in bridge.  */
+	else if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
+		 (PCI_SLOT(dev->bus->self->devfn) == 20)) {
+		slot = PCI_SLOT(dev->devfn) + 9;
+	}
+	else 
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
+			    (PCI_SLOT(dev->bus->self->devfn) == 20)) {
+				slot = PCI_SLOT(dev->devfn) + 9;
+				break;
+			}
+			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+static void __init
+miata_init_pci(void)
+{
+	cia_init_pci();
+	SMC669_Init(0); /* it might be a GL (fails harmlessly if not) */
+	es1888_init();
+}
+
+static void
+miata_kill_arch(int mode)
+{
+	cia_kill_arch(mode);
+
+#ifndef ALPHA_RESTORE_SRM_SETUP
+	switch(mode) {
+	case LINUX_REBOOT_CMD_RESTART:
+		/* Who said DEC engineers have no sense of humor? ;-)  */ 
+		if (alpha_using_srm) {
+			*(vuip) PYXIS_RESET = 0x0000dead; 
+			mb(); 
+		}
+		break;
+	case LINUX_REBOOT_CMD_HALT:
+		break;
+	case LINUX_REBOOT_CMD_POWER_OFF:
+		break;
+	}
+
+	halt();
+#endif
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector miata_mv __initmv = {
+	.vector_name		= "Miata",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= pyxis_device_interrupt,
+
+	.init_arch		= pyxis_init_arch,
+	.init_irq		= miata_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= miata_init_pci,
+	.kill_arch		= miata_kill_arch,
+	.pci_map_irq		= miata_map_irq,
+	.pci_swizzle		= miata_swizzle,
+};
+ALIAS_MV(miata)