summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-10-13 15:44:12 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2014-10-13 15:44:12 +0200
commitd6dd50e07c5bec00db2005969b1a01f8ca3d25ef (patch)
tree53e36ac30a3d0fdca3834f4e1eb36ddc67b512ce /Documentation
parent5ff0b9e1a1da58b584aa4b8ea234be20b5a1164b (diff)
parentfd19bda491207f66d39aeba93487197a087bc00b (diff)
downloadblackbird-op-linux-d6dd50e07c5bec00db2005969b1a01f8ca3d25ef.tar.gz
blackbird-op-linux-d6dd50e07c5bec00db2005969b1a01f8ca3d25ef.zip
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - changes related to No-CBs CPUs and NO_HZ_FULL - RCU-tasks implementation - torture-test updates - miscellaneous fixes - locktorture updates - RCU documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) workqueue: Use cond_resched_rcu_qs macro workqueue: Add quiescent state between work items locktorture: Cleanup header usage locktorture: Cannot hold read and write lock locktorture: Fix __acquire annotation for spinlock irq locktorture: Support rwlocks rcu: Eliminate deadlock between CPU hotplug and expedited grace periods locktorture: Document boot/module parameters rcutorture: Rename rcutorture_runnable parameter locktorture: Add test scenario for rwsem_lock locktorture: Add test scenario for mutex_lock locktorture: Make torture scripting account for new _runnable name locktorture: Introduce torture context locktorture: Support rwsems locktorture: Add infrastructure for torturing read locks torture: Address race in module cleanup locktorture: Make statistics generic locktorture: Teach about lock debugging locktorture: Support mutexes locktorture: Add documentation ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/RCU/stallwarn.txt33
-rw-r--r--Documentation/kernel-parameters.txt68
-rw-r--r--Documentation/locking/locktorture.txt147
-rw-r--r--Documentation/memory-barriers.txt128
4 files changed, 304 insertions, 72 deletions
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 68fe3ad27015..ef5a2fd4ff70 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -56,8 +56,20 @@ RCU_STALL_RAT_DELAY
two jiffies. (This is a cpp macro, not a kernel configuration
parameter.)
-When a CPU detects that it is stalling, it will print a message similar
-to the following:
+rcupdate.rcu_task_stall_timeout
+
+ This boot/sysfs parameter controls the RCU-tasks stall warning
+ interval. A value of zero or less suppresses RCU-tasks stall
+ warnings. A positive value sets the stall-warning interval
+ in jiffies. An RCU-tasks stall warning starts wtih the line:
+
+ INFO: rcu_tasks detected stalls on tasks:
+
+ And continues with the output of sched_show_task() for each
+ task stalling the current RCU-tasks grace period.
+
+For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling,
+it will print a message similar to the following:
INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies)
@@ -174,8 +186,12 @@ o A CPU looping with preemption disabled. This condition can
o A CPU looping with bottom halves disabled. This condition can
result in RCU-sched and RCU-bh stalls.
-o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
- without invoking schedule().
+o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the
+ kernel without invoking schedule(). Note that cond_resched()
+ does not necessarily prevent RCU CPU stall warnings. Therefore,
+ if the looping in the kernel is really expected and desirable
+ behavior, you might need to replace some of the cond_resched()
+ calls with calls to cond_resched_rcu_qs().
o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
happen to preempt a low-priority task in the middle of an RCU
@@ -208,11 +224,10 @@ o A hardware failure. This is quite unlikely, but has occurred
This resulted in a series of RCU CPU stall warnings, eventually
leading the realization that the CPU had failed.
-The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning.
-SRCU does not have its own CPU stall warnings, but its calls to
-synchronize_sched() will result in RCU-sched detecting RCU-sched-related
-CPU stalls. Please note that RCU only detects CPU stalls when there is
-a grace period in progress. No grace period, no CPU stall warnings.
+The RCU, RCU-sched, RCU-bh, and RCU-tasks implementations have CPU stall
+warning. Note that SRCU does -not- have CPU stall warnings. Please note
+that RCU only detects CPU stalls when there is a grace period in progress.
+No grace period, no CPU stall warnings.
To diagnose the cause of the stall, inspect the stack traces.
The offending function will usually be near the top of the stack.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f8a07128a6e8..04e9f5505faa 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1723,6 +1723,49 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
lockd.nlm_udpport=M [NFS] Assign UDP port.
Format: <integer>
+ locktorture.nreaders_stress= [KNL]
+ Set the number of locking read-acquisition kthreads.
+ Defaults to being automatically set based on the
+ number of online CPUs.
+
+ locktorture.nwriters_stress= [KNL]
+ Set the number of locking write-acquisition kthreads.
+
+ locktorture.onoff_holdoff= [KNL]
+ Set time (s) after boot for CPU-hotplug testing.
+
+ locktorture.onoff_interval= [KNL]
+ Set time (s) between CPU-hotplug operations, or
+ zero to disable CPU-hotplug testing.
+
+ locktorture.shuffle_interval= [KNL]
+ Set task-shuffle interval (jiffies). Shuffling
+ tasks allows some CPUs to go into dyntick-idle
+ mode during the locktorture test.
+
+ locktorture.shutdown_secs= [KNL]
+ Set time (s) after boot system shutdown. This
+ is useful for hands-off automated testing.
+
+ locktorture.stat_interval= [KNL]
+ Time (s) between statistics printk()s.
+
+ locktorture.stutter= [KNL]
+ Time (s) to stutter testing, for example,
+ specifying five seconds causes the test to run for
+ five seconds, wait for five seconds, and so on.
+ This tests the locking primitive's ability to
+ transition abruptly to and from idle.
+
+ locktorture.torture_runnable= [BOOT]
+ Start locktorture running at boot time.
+
+ locktorture.torture_type= [KNL]
+ Specify the locking implementation to test.
+
+ locktorture.verbose= [KNL]
+ Enable additional printk() statements.
+
logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
Format: <irq>
@@ -2900,6 +2943,24 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Lazy RCU callbacks are those which RCU can
prove do nothing more than free memory.
+ rcutorture.cbflood_inter_holdoff= [KNL]
+ Set holdoff time (jiffies) between successive
+ callback-flood tests.
+
+ rcutorture.cbflood_intra_holdoff= [KNL]
+ Set holdoff time (jiffies) between successive
+ bursts of callbacks within a given callback-flood
+ test.
+
+ rcutorture.cbflood_n_burst= [KNL]
+ Set the number of bursts making up a given
+ callback-flood test. Set this to zero to
+ disable callback-flood testing.
+
+ rcutorture.cbflood_n_per_burst= [KNL]
+ Set the number of callbacks to be registered
+ in a given burst of a callback-flood test.
+
rcutorture.fqs_duration= [KNL]
Set duration of force_quiescent_state bursts.
@@ -2939,7 +3000,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Set time (s) between CPU-hotplug operations, or
zero to disable CPU-hotplug testing.
- rcutorture.rcutorture_runnable= [BOOT]
+ rcutorture.torture_runnable= [BOOT]
Start rcutorture running at boot time.
rcutorture.shuffle_interval= [KNL]
@@ -3001,6 +3062,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rcupdate.rcu_cpu_stall_timeout= [KNL]
Set timeout for RCU CPU stall warning messages.
+ rcupdate.rcu_task_stall_timeout= [KNL]
+ Set timeout in jiffies for RCU task stall warning
+ messages. Disable with a value less than or equal
+ to zero.
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
diff --git a/Documentation/locking/locktorture.txt b/Documentation/locking/locktorture.txt
new file mode 100644
index 000000000000..619f2bb136a5
--- /dev/null
+++ b/Documentation/locking/locktorture.txt
@@ -0,0 +1,147 @@
+Kernel Lock Torture Test Operation
+
+CONFIG_LOCK_TORTURE_TEST
+
+The CONFIG LOCK_TORTURE_TEST config option provides a kernel module
+that runs torture tests on core kernel locking primitives. The kernel
+module, 'locktorture', may be built after the fact on the running
+kernel to be tested, if desired. The tests periodically output status
+messages via printk(), which can be examined via the dmesg (perhaps
+grepping for "torture"). The test is started when the module is loaded,
+and stops when the module is unloaded. This program is based on how RCU
+is tortured, via rcutorture.
+
+This torture test consists of creating a number of kernel threads which
+acquire the lock and hold it for specific amount of time, thus simulating
+different critical region behaviors. The amount of contention on the lock
+can be simulated by either enlarging this critical region hold time and/or
+creating more kthreads.
+
+
+MODULE PARAMETERS
+
+This module has the following parameters:
+
+
+ ** Locktorture-specific **
+
+nwriters_stress Number of kernel threads that will stress exclusive lock
+ ownership (writers). The default value is twice the number
+ of online CPUs.
+
+nreaders_stress Number of kernel threads that will stress shared lock
+ ownership (readers). The default is the same amount of writer
+ locks. If the user did not specify nwriters_stress, then
+ both readers and writers be the amount of online CPUs.
+
+torture_type Type of lock to torture. By default, only spinlocks will
+ be tortured. This module can torture the following locks,
+ with string values as follows:
+
+ o "lock_busted": Simulates a buggy lock implementation.
+
+ o "spin_lock": spin_lock() and spin_unlock() pairs.
+
+ o "spin_lock_irq": spin_lock_irq() and spin_unlock_irq()
+ pairs.
+
+ o "rw_lock": read/write lock() and unlock() rwlock pairs.
+
+ o "rw_lock_irq": read/write lock_irq() and unlock_irq()
+ rwlock pairs.
+
+ o "mutex_lock": mutex_lock() and mutex_unlock() pairs.
+
+ o "rwsem_lock": read/write down() and up() semaphore pairs.
+
+torture_runnable Start locktorture at boot time in the case where the
+ module is built into the kernel, otherwise wait for
+ torture_runnable to be set via sysfs before starting.
+ By default it will begin once the module is loaded.
+
+
+ ** Torture-framework (RCU + locking) **
+
+shutdown_secs The number of seconds to run the test before terminating
+ the test and powering off the system. The default is
+ zero, which disables test termination and system shutdown.
+ This capability is useful for automated testing.
+
+onoff_interval The number of seconds between each attempt to execute a
+ randomly selected CPU-hotplug operation. Defaults
+ to zero, which disables CPU hotplugging. In
+ CONFIG_HOTPLUG_CPU=n kernels, locktorture will silently
+ refuse to do any CPU-hotplug operations regardless of
+ what value is specified for onoff_interval.
+
+onoff_holdoff The number of seconds to wait until starting CPU-hotplug
+ operations. This would normally only be used when
+ locktorture was built into the kernel and started
+ automatically at boot time, in which case it is useful
+ in order to avoid confusing boot-time code with CPUs
+ coming and going. This parameter is only useful if
+ CONFIG_HOTPLUG_CPU is enabled.
+
+stat_interval Number of seconds between statistics-related printk()s.
+ By default, locktorture will report stats every 60 seconds.
+ Setting the interval to zero causes the statistics to
+ be printed -only- when the module is unloaded, and this
+ is the default.
+
+stutter The length of time to run the test before pausing for this
+ same period of time. Defaults to "stutter=5", so as
+ to run and pause for (roughly) five-second intervals.
+ Specifying "stutter=0" causes the test to run continuously
+ without pausing, which is the old default behavior.
+
+shuffle_interval The number of seconds to keep the test threads affinitied
+ to a particular subset of the CPUs, defaults to 3 seconds.
+ Used in conjunction with test_no_idle_hz.
+
+verbose Enable verbose debugging printing, via printk(). Enabled
+ by default. This extra information is mostly related to
+ high-level errors and reports from the main 'torture'
+ framework.
+
+
+STATISTICS
+
+Statistics are printed in the following format:
+
+spin_lock-torture: Writes: Total: 93746064 Max/Min: 0/0 Fail: 0
+ (A) (B) (C) (D) (E)
+
+(A): Lock type that is being tortured -- torture_type parameter.
+
+(B): Number of writer lock acquisitions. If dealing with a read/write primitive
+ a second "Reads" statistics line is printed.
+
+(C): Number of times the lock was acquired.
+
+(D): Min and max number of times threads failed to acquire the lock.
+
+(E): true/false values if there were errors acquiring the lock. This should
+ -only- be positive if there is a bug in the locking primitive's
+ implementation. Otherwise a lock should never fail (i.e., spin_lock()).
+ Of course, the same applies for (C), above. A dummy example of this is
+ the "lock_busted" type.
+
+USAGE
+
+The following script may be used to torture locks:
+
+ #!/bin/sh
+
+ modprobe locktorture
+ sleep 3600
+ rmmod locktorture
+ dmesg | grep torture:
+
+The output can be manually inspected for the error flag of "!!!".
+One could of course create a more elaborate script that automatically
+checked for such errors. The "rmmod" command forces a "SUCCESS",
+"FAILURE", or "RCU_HOTPLUG" indication to be printk()ed. The first
+two are self-explanatory, while the last indicates that while there
+were no locking failures, CPU-hotplug problems were detected.
+
+Also see: Documentation/RCU/torture.txt
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index a4de88fb55f0..22a969cdd476 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -574,30 +574,14 @@ However, stores are not speculated. This means that ordering -is- provided
in the following example:
q = ACCESS_ONCE(a);
- if (ACCESS_ONCE(q)) {
- ACCESS_ONCE(b) = p;
- }
-
-Please note that ACCESS_ONCE() is not optional! Without the ACCESS_ONCE(),
-the compiler is within its rights to transform this example:
-
- q = a;
if (q) {
- b = p; /* BUG: Compiler can reorder!!! */
- do_something();
- } else {
- b = p; /* BUG: Compiler can reorder!!! */
- do_something_else();
+ ACCESS_ONCE(b) = p;
}
-into this, which of course defeats the ordering:
-
- b = p;
- q = a;
- if (q)
- do_something();
- else
- do_something_else();
+Please note that ACCESS_ONCE() is not optional! Without the
+ACCESS_ONCE(), might combine the load from 'a' with other loads from
+'a', and the store to 'b' with other stores to 'b', with possible highly
+counterintuitive effects on ordering.
Worse yet, if the compiler is able to prove (say) that the value of
variable 'a' is always non-zero, it would be well within its rights
@@ -605,11 +589,12 @@ to optimize the original example by eliminating the "if" statement
as follows:
q = a;
- b = p; /* BUG: Compiler can reorder!!! */
- do_something();
+ b = p; /* BUG: Compiler and CPU can both reorder!!! */
+
+So don't leave out the ACCESS_ONCE().
-The solution is again ACCESS_ONCE() and barrier(), which preserves the
-ordering between the load from variable 'a' and the store to variable 'b':
+It is tempting to try to enforce ordering on identical stores on both
+branches of the "if" statement as follows:
q = ACCESS_ONCE(a);
if (q) {
@@ -622,18 +607,11 @@ ordering between the load from variable 'a' and the store to variable 'b':
do_something_else();
}
-The initial ACCESS_ONCE() is required to prevent the compiler from
-proving the value of 'a', and the pair of barrier() invocations are
-required to prevent the compiler from pulling the two identical stores
-to 'b' out from the legs of the "if" statement.
-
-It is important to note that control dependencies absolutely require a
-a conditional. For example, the following "optimized" version of
-the above example breaks ordering, which is why the barrier() invocations
-are absolutely required if you have identical stores in both legs of
-the "if" statement:
+Unfortunately, current compilers will transform this as follows at high
+optimization levels:
q = ACCESS_ONCE(a);
+ barrier();
ACCESS_ONCE(b) = p; /* BUG: No ordering vs. load from a!!! */
if (q) {
/* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */
@@ -643,21 +621,36 @@ the "if" statement:
do_something_else();
}
-It is of course legal for the prior load to be part of the conditional,
-for example, as follows:
+Now there is no conditional between the load from 'a' and the store to
+'b', which means that the CPU is within its rights to reorder them:
+The conditional is absolutely required, and must be present in the
+assembly code even after all compiler optimizations have been applied.
+Therefore, if you need ordering in this example, you need explicit
+memory barriers, for example, smp_store_release():
- if (ACCESS_ONCE(a) > 0) {
- barrier();
- ACCESS_ONCE(b) = q / 2;
+ q = ACCESS_ONCE(a);
+ if (q) {
+ smp_store_release(&b, p);
do_something();
} else {
- barrier();
- ACCESS_ONCE(b) = q / 3;
+ smp_store_release(&b, p);
+ do_something_else();
+ }
+
+In contrast, without explicit memory barriers, two-legged-if control
+ordering is guaranteed only when the stores differ, for example:
+
+ q = ACCESS_ONCE(a);
+ if (q) {
+ ACCESS_ONCE(b) = p;
+ do_something();
+ } else {
+ ACCESS_ONCE(b) = r;
do_something_else();
}
-This will again ensure that the load from variable 'a' is ordered before the
-stores to variable 'b'.
+The initial ACCESS_ONCE() is still required to prevent the compiler from
+proving the value of 'a'.
In addition, you need to be careful what you do with the local variable 'q',
otherwise the compiler might be able to guess the value and again remove
@@ -665,12 +658,10 @@ the needed conditional. For example:
q = ACCESS_ONCE(a);
if (q % MAX) {
- barrier();
ACCESS_ONCE(b) = p;
do_something();
} else {
- barrier();
- ACCESS_ONCE(b) = p;
+ ACCESS_ONCE(b) = r;
do_something_else();
}
@@ -682,9 +673,12 @@ transform the above code into the following:
ACCESS_ONCE(b) = p;
do_something_else();
-This transformation loses the ordering between the load from variable 'a'
-and the store to variable 'b'. If you are relying on this ordering, you
-should do something like the following:
+Given this transformation, the CPU is not required to respect the ordering
+between the load from variable 'a' and the store to variable 'b'. It is
+tempting to add a barrier(), but this does not help. The conditional
+is gone, and the barrier won't bring it back. Therefore, if you are
+relying on this ordering, you should make sure that MAX is greater than
+one, perhaps as follows:
q = ACCESS_ONCE(a);
BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */
@@ -692,35 +686,45 @@ should do something like the following:
ACCESS_ONCE(b) = p;
do_something();
} else {
- ACCESS_ONCE(b) = p;
+ ACCESS_ONCE(b) = r;
do_something_else();
}
+Please note once again that the stores to 'b' differ. If they were
+identical, as noted earlier, the compiler could pull this store outside
+of the 'if' statement.
+
Finally, control dependencies do -not- provide transitivity. This is
-demonstrated by two related examples:
+demonstrated by two related examples, with the initial values of
+x and y both being zero:
CPU 0 CPU 1
===================== =====================
r1 = ACCESS_ONCE(x); r2 = ACCESS_ONCE(y);
- if (r1 >= 0) if (r2 >= 0)
+ if (r1 > 0) if (r2 > 0)
ACCESS_ONCE(y) = 1; ACCESS_ONCE(x) = 1;
assert(!(r1 == 1 && r2 == 1));
The above two-CPU example will never trigger the assert(). However,
if control dependencies guaranteed transitivity (which they do not),
-then adding the following two CPUs would guarantee a related assertion:
+then adding the following CPU would guarantee a related assertion:
- CPU 2 CPU 3
- ===================== =====================
- ACCESS_ONCE(x) = 2; ACCESS_ONCE(y) = 2;
+ CPU 2
+ =====================
+ ACCESS_ONCE(x) = 2;
+
+ assert(!(r1 == 2 && r2 == 1 && x == 2)); /* FAILS!!! */
- assert(!(r1 == 2 && r2 == 2 && x == 1 && y == 1)); /* FAILS!!! */
+But because control dependencies do -not- provide transitivity, the above
+assertion can fail after the combined three-CPU example completes. If you
+need the three-CPU example to provide ordering, you will need smp_mb()
+between the loads and stores in the CPU 0 and CPU 1 code fragments,
+that is, just before or just after the "if" statements.
-But because control dependencies do -not- provide transitivity, the
-above assertion can fail after the combined four-CPU example completes.
-If you need the four-CPU example to provide ordering, you will need
-smp_mb() between the loads and stores in the CPU 0 and CPU 1 code fragments.
+These two examples are the LB and WWC litmus tests from this paper:
+http://www.cl.cam.ac.uk/users/pes20/ppc-supplemental/test6.pdf and this
+site: https://www.cl.cam.ac.uk/~pes20/ppcmem/index.html.
In summary:
OpenPOWER on IntegriCloud