Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 23 insertions, 0 deletions

diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232
new file mode 100644
index 000000000000..7d6af7a5c1c2
--- /dev/null
+++ b/Documentation/sound/oss/CS4232
@@ -0,0 +1,23 @@
+To configure the Crystal CS423x sound chip and activate its DSP functions,
+modules may be loaded in this order:
+  
+	modprobe sound
+	insmod ad1848
+	insmod uart401
+	insmod cs4232 io=* irq=* dma=* dma2=*
+  
+This is the meaning of the parameters:
+  
+	io--I/O address of the Windows Sound System (normally 0x534)
+	irq--IRQ of this device
+	dma and dma2--DMA channels (DMA2 may be 0)
+  
+On some cards, the board attempts to do non-PnP setup, and fails.  If you
+have problems, use Linux' PnP facilities. 
+  
+To get MIDI facilities add
+  
+	insmod opl3 io=*
+  
+where "io" is the I/O address of the OPL3 synthesizer. This will be shown
+in /proc/sys/pnp and is normally 0x388.