diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/initrd.txt | |
download | blackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz blackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/initrd.txt')
-rw-r--r-- | Documentation/initrd.txt | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/Documentation/initrd.txt b/Documentation/initrd.txt new file mode 100644 index 000000000000..7de1c80cd719 --- /dev/null +++ b/Documentation/initrd.txt @@ -0,0 +1,340 @@ +Using the initial RAM disk (initrd) +=================================== + +Written 1996,2000 by Werner Almesberger <werner.almesberger@epfl.ch> and + Hans Lermen <lermen@fgan.de> + + +initrd provides the capability to load a RAM disk by the boot loader. +This RAM disk can then be mounted as the root file system and programs +can be run from it. Afterwards, a new root file system can be mounted +from a different device. The previous root (from initrd) is then moved +to a directory and can be subsequently unmounted. + +initrd is mainly designed to allow system startup to occur in two phases, +where the kernel comes up with a minimum set of compiled-in drivers, and +where additional modules are loaded from initrd. + +This document gives a brief overview of the use of initrd. A more detailed +discussion of the boot process can be found in [1]. + + +Operation +--------- + +When using initrd, the system typically boots as follows: + + 1) the boot loader loads the kernel and the initial RAM disk + 2) the kernel converts initrd into a "normal" RAM disk and + frees the memory used by initrd + 3) initrd is mounted read-write as root + 4) /linuxrc is executed (this can be any valid executable, including + shell scripts; it is run with uid 0 and can do basically everything + init can do) + 5) linuxrc mounts the "real" root file system + 6) linuxrc places the root file system at the root directory using the + pivot_root system call + 7) the usual boot sequence (e.g. invocation of /sbin/init) is performed + on the root file system + 8) the initrd file system is removed + +Note that changing the root directory does not involve unmounting it. +It is therefore possible to leave processes running on initrd during that +procedure. Also note that file systems mounted under initrd continue to +be accessible. + + +Boot command-line options +------------------------- + +initrd adds the following new options: + + initrd=<path> (e.g. LOADLIN) + + Loads the specified file as the initial RAM disk. When using LILO, you + have to specify the RAM disk image file in /etc/lilo.conf, using the + INITRD configuration variable. + + noinitrd + + initrd data is preserved but it is not converted to a RAM disk and + the "normal" root file system is mounted. initrd data can be read + from /dev/initrd. Note that the data in initrd can have any structure + in this case and doesn't necessarily have to be a file system image. + This option is used mainly for debugging. + + Note: /dev/initrd is read-only and it can only be used once. As soon + as the last process has closed it, all data is freed and /dev/initrd + can't be opened anymore. + + root=/dev/ram0 (without devfs) + root=/dev/rd/0 (with devfs) + + initrd is mounted as root, and the normal boot procedure is followed, + with the RAM disk still mounted as root. + + +Installation +------------ + +First, a directory for the initrd file system has to be created on the +"normal" root file system, e.g. + +# mkdir /initrd + +The name is not relevant. More details can be found on the pivot_root(2) +man page. + +If the root file system is created during the boot procedure (i.e. if +you're building an install floppy), the root file system creation +procedure should create the /initrd directory. + +If initrd will not be mounted in some cases, its content is still +accessible if the following device has been created (note that this +does not work if using devfs): + +# mknod /dev/initrd b 1 250 +# chmod 400 /dev/initrd + +Second, the kernel has to be compiled with RAM disk support and with +support for the initial RAM disk enabled. Also, at least all components +needed to execute programs from initrd (e.g. executable format and file +system) must be compiled into the kernel. + +Third, you have to create the RAM disk image. This is done by creating a +file system on a block device, copying files to it as needed, and then +copying the content of the block device to the initrd file. With recent +kernels, at least three types of devices are suitable for that: + + - a floppy disk (works everywhere but it's painfully slow) + - a RAM disk (fast, but allocates physical memory) + - a loopback device (the most elegant solution) + +We'll describe the loopback device method: + + 1) make sure loopback block devices are configured into the kernel + 2) create an empty file system of the appropriate size, e.g. + # dd if=/dev/zero of=initrd bs=300k count=1 + # mke2fs -F -m0 initrd + (if space is critical, you may want to use the Minix FS instead of Ext2) + 3) mount the file system, e.g. + # mount -t ext2 -o loop initrd /mnt + 4) create the console device (not necessary if using devfs, but it can't + hurt to do it anyway): + # mkdir /mnt/dev + # mknod /mnt/dev/console c 5 1 + 5) copy all the files that are needed to properly use the initrd + environment. Don't forget the most important file, /linuxrc + Note that /linuxrc's permissions must include "x" (execute). + 6) correct operation the initrd environment can frequently be tested + even without rebooting with the command + # chroot /mnt /linuxrc + This is of course limited to initrds that do not interfere with the + general system state (e.g. by reconfiguring network interfaces, + overwriting mounted devices, trying to start already running demons, + etc. Note however that it is usually possible to use pivot_root in + such a chroot'ed initrd environment.) + 7) unmount the file system + # umount /mnt + 8) the initrd is now in the file "initrd". Optionally, it can now be + compressed + # gzip -9 initrd + +For experimenting with initrd, you may want to take a rescue floppy and +only add a symbolic link from /linuxrc to /bin/sh. Alternatively, you +can try the experimental newlib environment [2] to create a small +initrd. + +Finally, you have to boot the kernel and load initrd. Almost all Linux +boot loaders support initrd. Since the boot process is still compatible +with an older mechanism, the following boot command line parameters +have to be given: + + root=/dev/ram0 init=/linuxrc rw + +if not using devfs, or + + root=/dev/rd/0 init=/linuxrc rw + +if using devfs. (rw is only necessary if writing to the initrd file +system.) + +With LOADLIN, you simply execute + + LOADLIN <kernel> initrd=<disk_image> +e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0 + init=/linuxrc rw + +With LILO, you add the option INITRD=<path> to either the global section +or to the section of the respective kernel in /etc/lilo.conf, and pass +the options using APPEND, e.g. + + image = /bzImage + initrd = /boot/initrd.gz + append = "root=/dev/ram0 init=/linuxrc rw" + +and run /sbin/lilo + +For other boot loaders, please refer to the respective documentation. + +Now you can boot and enjoy using initrd. + + +Changing the root device +------------------------ + +When finished with its duties, linuxrc typically changes the root device +and proceeds with starting the Linux system on the "real" root device. + +The procedure involves the following steps: + - mounting the new root file system + - turning it into the root file system + - removing all accesses to the old (initrd) root file system + - unmounting the initrd file system and de-allocating the RAM disk + +Mounting the new root file system is easy: it just needs to be mounted on +a directory under the current root. Example: + +# mkdir /new-root +# mount -o ro /dev/hda1 /new-root + +The root change is accomplished with the pivot_root system call, which +is also available via the pivot_root utility (see pivot_root(8) man +page; pivot_root is distributed with util-linux version 2.10h or higher +[3]). pivot_root moves the current root to a directory under the new +root, and puts the new root at its place. The directory for the old root +must exist before calling pivot_root. Example: + +# cd /new-root +# mkdir initrd +# pivot_root . initrd + +Now, the linuxrc process may still access the old root via its +executable, shared libraries, standard input/output/error, and its +current root directory. All these references are dropped by the +following command: + +# exec chroot . what-follows <dev/console >dev/console 2>&1 + +Where what-follows is a program under the new root, e.g. /sbin/init +If the new root file system will be used with devfs and has no valid +/dev directory, devfs must be mounted before invoking chroot in order to +provide /dev/console. + +Note: implementation details of pivot_root may change with time. In order +to ensure compatibility, the following points should be observed: + + - before calling pivot_root, the current directory of the invoking + process should point to the new root directory + - use . as the first argument, and the _relative_ path of the directory + for the old root as the second argument + - a chroot program must be available under the old and the new root + - chroot to the new root afterwards + - use relative paths for dev/console in the exec command + +Now, the initrd can be unmounted and the memory allocated by the RAM +disk can be freed: + +# umount /initrd +# blockdev --flushbufs /dev/ram0 # /dev/rd/0 if using devfs + +It is also possible to use initrd with an NFS-mounted root, see the +pivot_root(8) man page for details. + +Note: if linuxrc or any program exec'ed from it terminates for some +reason, the old change_root mechanism is invoked (see section "Obsolete +root change mechanism"). + + +Usage scenarios +--------------- + +The main motivation for implementing initrd was to allow for modular +kernel configuration at system installation. The procedure would work +as follows: + + 1) system boots from floppy or other media with a minimal kernel + (e.g. support for RAM disks, initrd, a.out, and the Ext2 FS) and + loads initrd + 2) /linuxrc determines what is needed to (1) mount the "real" root FS + (i.e. device type, device drivers, file system) and (2) the + distribution media (e.g. CD-ROM, network, tape, ...). This can be + done by asking the user, by auto-probing, or by using a hybrid + approach. + 3) /linuxrc loads the necessary kernel modules + 4) /linuxrc creates and populates the root file system (this doesn't + have to be a very usable system yet) + 5) /linuxrc invokes pivot_root to change the root file system and + execs - via chroot - a program that continues the installation + 6) the boot loader is installed + 7) the boot loader is configured to load an initrd with the set of + modules that was used to bring up the system (e.g. /initrd can be + modified, then unmounted, and finally, the image is written from + /dev/ram0 or /dev/rd/0 to a file) + 8) now the system is bootable and additional installation tasks can be + performed + +The key role of initrd here is to re-use the configuration data during +normal system operation without requiring the use of a bloated "generic" +kernel or re-compiling or re-linking the kernel. + +A second scenario is for installations where Linux runs on systems with +different hardware configurations in a single administrative domain. In +such cases, it is desirable to generate only a small set of kernels +(ideally only one) and to keep the system-specific part of configuration +information as small as possible. In this case, a common initrd could be +generated with all the necessary modules. Then, only /linuxrc or a file +read by it would have to be different. + +A third scenario are more convenient recovery disks, because information +like the location of the root FS partition doesn't have to be provided at +boot time, but the system loaded from initrd can invoke a user-friendly +dialog and it can also perform some sanity checks (or even some form of +auto-detection). + +Last not least, CD-ROM distributors may use it for better installation +from CD, e.g. by using a boot floppy and bootstrapping a bigger RAM disk +via initrd from CD; or by booting via a loader like LOADLIN or directly +from the CD-ROM, and loading the RAM disk from CD without need of +floppies. + + +Obsolete root change mechanism +------------------------------ + +The following mechanism was used before the introduction of pivot_root. +Current kernels still support it, but you should _not_ rely on its +continued availability. + +It works by mounting the "real" root device (i.e. the one set with rdev +in the kernel image or with root=... at the boot command line) as the +root file system when linuxrc exits. The initrd file system is then +unmounted, or, if it is still busy, moved to a directory /initrd, if +such a directory exists on the new root file system. + +In order to use this mechanism, you do not have to specify the boot +command options root, init, or rw. (If specified, they will affect +the real root file system, not the initrd environment.) + +If /proc is mounted, the "real" root device can be changed from within +linuxrc by writing the number of the new root FS device to the special +file /proc/sys/kernel/real-root-dev, e.g. + + # echo 0x301 >/proc/sys/kernel/real-root-dev + +Note that the mechanism is incompatible with NFS and similar file +systems. + +This old, deprecated mechanism is commonly called "change_root", while +the new, supported mechanism is called "pivot_root". + + +Resources +--------- + +[1] Almesberger, Werner; "Booting Linux: The History and the Future" + http://www.almesberger.net/cv/papers/ols2k-9.ps.gz +[2] newlib package (experimental), with initrd example + http://sources.redhat.com/newlib/ +[3] Brouwer, Andries; "util-linux: Miscellaneous utilities for Linux" + ftp://ftp.win.tue.nl/pub/linux-local/utils/util-linux/ |