diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-27 15:38:23 +0200 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-27 15:38:23 +0200 |
| commit | 9fd91d959f1a19d1bfa46d97cbbbb55641ce26a6 (patch) | |
| tree | 9938cfef8cce9dd87f48fe40b6bca51a1c737fc5 /Documentation/ide | |
| parent | 9c391bae6a65bd39962877ad7dc000b600757bbe (diff) | |
| download | blackbird-op-linux-9fd91d959f1a19d1bfa46d97cbbbb55641ce26a6.tar.gz blackbird-op-linux-9fd91d959f1a19d1bfa46d97cbbbb55641ce26a6.zip | |
ide: add "ignore_cable" parameter (take 2)
Add "ignore_cable" parameter:
* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
(i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")
* "ignore_cable=[interface_number]" module parameter (for ide_core module)
if IDE is compiled as module
v2:
* Add ide_port_apply_params() helper
- use it in ide_device_add_all() and ide_scan_port().
* Make it possible to later disable ignoring cable detection by passing
"[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
(however sysfs interface is not enabled yet since it needs some other
IDE changes to make it work reliable).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'Documentation/ide')
| -rw-r--r-- | Documentation/ide/ide.txt | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index 486c699f4aea..829a618c3e93 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -224,11 +224,6 @@ Summary of ide driver parameters for kernel command line "idex=reset" : reset interface after probe - "idex=ata66" : informs the interface that it has an 80c cable - for chipsets that are ATA-66 capable, but the - ability to bit test for detection is currently - unknown. - "ide=doubler" : probe/support IDE doublers on Amiga There may be more options than shown -- use the source, Luke! @@ -251,6 +246,16 @@ are detected automatically). You also need to use "probe" kernel parameter for ide-4drives driver (support for IDE generic chipset with four drives on one port). +To force ignoring cable detection (this should be needed only if you're using +short 40-wires cable which cannot be automatically detected - if this is not +a case please report it as a bug instead) use "ignore_cable" kernel parameter: + +* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in + (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1") + +* "ignore_cable=[interface_number]" module parameter (for ide_core module) + if IDE is compiled as module + ================================================================================ Some Terminology |
