summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2014-01-29 20:40:08 +0100
committerJean Delvare <khali@endymion.delvare>2014-01-29 20:40:08 +0100
commitc145d5c628c8ca02dabbf6829ae19ce525d42796 (patch)
tree0d3e553a0ae9abaf0c8e67ad7f42bc57431a98a1 /Documentation/hwmon
parentd8ec26d7f8287f5788a494f56e8814210f0e64be (diff)
downloadblackbird-op-linux-c145d5c628c8ca02dabbf6829ae19ce525d42796.tar.gz
blackbird-op-linux-c145d5c628c8ca02dabbf6829ae19ce525d42796.zip
hwmon: (it87) Add support for the ITE IT8603E
Add support for IT8603E. This closes bug #57861: https://bugzilla.kernel.org/show_bug.cgi?id=57861 [JD: Fixes and clean-ups.] Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/it8727
1 files changed, 19 insertions, 8 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index c263740f0cba..0f5bba9aa02d 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -2,6 +2,10 @@ Kernel driver it87
==================
Supported chips:
+ * IT8603E
+ Prefix: 'it8603'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
* IT8705F
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -90,7 +94,7 @@ motherboard models.
Description
-----------
-This driver implements support for the IT8705F, IT8712F, IT8716F,
+This driver implements support for the IT8603E, IT8705F, IT8712F, IT8716F,
IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, IT8772E,
IT8782F, IT8783E/F, and SiS950 chips.
@@ -129,6 +133,10 @@ to userspace applications.
The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
until a datasheet becomes available (hopefully.)
+The IT8603E is a custom design, hardware monitoring part is similar to
+IT8728F. It only supports 16-bit fan mode, the full speed mode of the
+fan is not supported (value 0 of pwmX_enable).
+
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
@@ -145,13 +153,16 @@ alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
-voltage in8 does not have limit registers.
-
-On the IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs are
-internal and scaled inside the chip (in7 (optional for IT8782F and IT8783E/F),
-in8 and optionally in3). The driver handles this transparently so user-space
-doesn't have to care.
+0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The
+battery voltage in8 does not have limit registers.
+
+On the IT8603E, IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs
+are internal and scaled inside the chip:
+* in3 (optional)
+* in7 (optional for IT8782F and IT8783E/F)
+* in8 (always)
+* in9 (relevant for IT8603E only)
+The driver handles this transparently so user-space doesn't have to care.
The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
the voltage level your processor should work with. This is hardcoded by
OpenPOWER on IntegriCloud