diff options
author | Jean Delvare <khali@linux-fr.org> | 2006-10-08 21:59:54 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2006-10-18 13:03:08 -0700 |
commit | 15fe25ca67234514d7cf41af28096c1330f44950 (patch) | |
tree | f96a7f39dac4bf29e7ecf6ac3b7fb79aac433a9a /Documentation/hwmon/w83627ehf | |
parent | 2ca7b961c3c9f072d307293aad0f9705522e916a (diff) | |
download | blackbird-op-linux-15fe25ca67234514d7cf41af28096c1330f44950.tar.gz blackbird-op-linux-15fe25ca67234514d7cf41af28096c1330f44950.zip |
hwmon: Fix documentation typos
Fix typos in hardware monitoring documentation.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation/hwmon/w83627ehf')
-rw-r--r-- | Documentation/hwmon/w83627ehf | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index fae3b781d82d..caa610a297e8 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -26,7 +26,7 @@ fan control mode). Temperatures are measured in degrees Celsius and measurement resolution is 1 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when the temperature gets higher than high limit; it stays on until the temperature -falls below the Hysteresis value. +falls below the hysteresis value. Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan @@ -67,9 +67,9 @@ Thermal Cruise mode If the temperature is in the range defined by: -pwm[1-4]_target - set target temperature, unit millidegree Celcius +pwm[1-4]_target - set target temperature, unit millidegree Celsius (range 0 - 127000) -pwm[1-4]_tolerance - tolerance, unit millidegree Celcius (range 0 - 15000) +pwm[1-4]_tolerance - tolerance, unit millidegree Celsius (range 0 - 15000) there are no changes to fan speed. Once the temperature leaves the interval, fan speed increases (temp is higher) or decreases if lower than desired. |