drivers/video: add support for the Solomon SSD1307 OLED Controller

Add support for the Solomon SSD1307 OLED controller found on the
Crystalfontz CFA10036 board.

This controller can drive a display with a resolution up to 128x39 and can
operate over I2C or SPI.

The current driver has only been tested on the CFA-10036, that is using
this controller over I2C to driver a 96x16 OLED screen.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Thomas Petazzoni <thomas@free-electrons.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

1 files changed, 24 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt
new file mode 100644
index 000000000000..3d0060cff062
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt
@@ -0,0 +1,24 @@
+* Solomon SSD1307 Framebuffer Driver
+
+Required properties:
+  - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for
+    now is i2c.
+  - reg: Should contain address of the controller on the I2C bus. Most likely
+         0x3c or 0x3d
+  - pwm: Should contain the pwm to use according to the OF device tree PWM
+         specification [0]
+  - reset-gpios: Should contain the GPIO used to reset the OLED display
+
+Optional properties:
+  - reset-active-low: Is the reset gpio is active on physical low?
+
+[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+
+Examples:
+ssd1307: oled@3c {
+        compatible = "solomon,ssd1307fb-i2c";
+        reg = <0x3c>;
+        pwms = <&pwm 4 3000>;
+        reset-gpios = <&gpio2 7>;
+        reset-active-low;
+};