Merge tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree update from Greg Kroah-Hartman:
 "Here's the big staging driver tree update for 3.10-rc1

  This update contains loads of comedi driver cleanups and fixes in
  here, iio updates, android driver changes, and other various staging
  driver cleanups.

  Thanks to some drivers being removed, and the comedi driver cleanups,
  we have removed more code than we added:

   627 files changed, 65145 insertions(+), 76321 deletions(-)

  which is always nice to see.

  All of these have been in linux-next for a while."

* tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (940 commits)
  staging: comedi: ni_labpc: fix legacy driver build
  staging: comedi: das800: cleanup the cio-das802/16 fifo comments
  staging: comedi: das800: rename CamelCase vars in das800_ai_do_cmd()
  staging: comedi: das800: tidy up the private data
  staging: comedi: das800: tidy up das800_interrupt()
  staging: comedi: das800: tidy up das800_ai_insn_read()
  staging: comedi: das800: tidy up das800_di_insn_bits()
  staging: comedi: das800: tidy up das800_do_insn_bits()
  staging: comedi: das800: remove extra divisor calculation call
  staging: comedi: das800: rename {enable,disable}_das800
  staging: comedi: das800: tidy up subdevice init
  staging: comedi: das800: allow attaching without interrupt support
  staging: comedi: das800: interrupts are required for async command support
  staging: comedi: das800: tidy up das800_ai_do_cmdtest()
  staging: comedi: das800: remove 'volatile' on private data variables
  staging: comedi: das800: cleanup the boardinfo
  staging: comedi: das800: cleanup range table declarations
  staging: comedi: das800: introduce das800_ind_{write, read}()
  staging: comedi: das800: remove forward declarations
  staging: comedi: das800: move das800_set_frequency()
  ...

5 files changed, 186 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index c63097d6afeb..16769d9cedd6 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -14,9 +14,19 @@ Required properties:
   - atmel,adc-status-register: Offset of the Interrupt Status Register
   - atmel,adc-trigger-register: Offset of the Trigger Register
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
+  - atmel,adc-res: List of resolution in bits supported by the ADC. List size
+		   must be two at least.
+  - atmel,adc-res-names: Contains one identifier string for each resolution
+			 in atmel,adc-res property. "lowres" and "highres"
+			 identifiers are required.
 
 Optional properties:
   - atmel,adc-use-external: Boolean to enable of external triggers
+  - atmel,adc-use-res: String corresponding to an identifier from
+		       atmel,adc-res-names property. If not specified, the highest
+		       resolution will be used.
+  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
+  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
  
 Optional trigger Nodes:
   - Required properties:
@@ -40,6 +50,9 @@ adc0: adc@fffb0000 {
 	atmel,adc-trigger-register = <0x08>;
 	atmel,adc-use-external;
 	atmel,adc-vref = <3300>;
+	atmel,adc-res = <8 10>;
+	atmel,adc-res-names = "lowres", "highres";
+	atmel,adc-use-res = "lowres";
 
 	trigger@0 {
 		trigger-name = "external-rising";
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
new file mode 100644
index 000000000000..47ada1dff216
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -0,0 +1,60 @@
+Samsung Exynos Analog to Digital Converter bindings
+
+The devicetree bindings are for the new ADC driver written for
+Exynos4 and upward SoCs from Samsung.
+
+New driver handles the following
+1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
+   and future SoCs from Samsung
+2. Add ADC driver under iio/adc framework
+3. Also adds the Documentation for device tree bindings
+
+Required properties:
+- compatible:		Must be "samsung,exynos-adc-v1"
+				for exynos4412/5250 controllers.
+			Must be "samsung,exynos-adc-v2" for
+				future controllers.
+- reg:			Contains ADC register address range (base address and
+			length) and the address of the phy enable register.
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the Samsung device uses.
+- #io-channel-cells = <1>; As ADC has multiple outputs
+- clocks		From common clock binding: handle to adc clock.
+- clock-names		From common clock binding: Shall be "adc".
+- vdd-supply		VDD input supply.
+
+Note: child nodes can be added for auto probing from device tree.
+
+Example: adding device info in dtsi file
+
+adc: adc@12D10000 {
+	compatible = "samsung,exynos-adc-v1";
+	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	interrupts = <0 106 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&clock 303>;
+	clock-names = "adc";
+
+	vdd-supply = <&buck5_reg>;
+};
+
+
+Example: Adding child nodes in dts file
+
+adc@12D10000 {
+
+	/* NTC thermistor is a hwmon device */
+	ncp15wb473@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uV = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 4>;
+	};
+};
+
+Note: Does not apply to ADC driver under arch/arm/plat-samsung/
+Note: The child node can be added under the adc node or separately.
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
new file mode 100644
index 000000000000..0b447d9ad196
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -0,0 +1,97 @@
+This binding is derived from clock bindings, and based on suggestions
+from Lars-Peter Clausen [1].
+
+Sources of IIO channels can be represented by any node in the device
+tree. Those nodes are designated as IIO providers. IIO consumer
+nodes use a phandle and IIO specifier pair to connect IIO provider
+outputs to IIO inputs. Similar to the gpio specifiers, an IIO
+specifier is an array of one or more cells identifying the IIO
+output on a device. The length of an IIO specifier is defined by the
+value of a #io-channel-cells property in the IIO provider node.
+
+[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+
+==IIO providers==
+
+Required properties:
+#io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes
+		   with a single IIO output and 1 for nodes with multiple
+		   IIO outputs.
+
+Example for a simple configuration with no trigger:
+
+	adc: voltage-sensor@35 {
+		compatible = "maxim,max1139";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+Example for a configuration with trigger:
+
+	adc@35 {
+		compatible = "some-vendor,some-adc";
+		reg = <0x35>;
+
+		adc1: iio-device@0 {
+			#io-channel-cells = <1>;
+			/* other properties */
+		};
+		adc2: iio-device@1 {
+			#io-channel-cells = <1>;
+			/* other properties */
+		};
+	};
+
+==IIO consumers==
+
+Required properties:
+io-channels:	List of phandle and IIO specifier pairs, one pair
+		for each IIO input to the device. Note: if the
+		IIO provider specifies '0' for #io-channel-cells,
+		then only the phandle portion of the pair will appear.
+
+Optional properties:
+io-channel-names:
+		List of IIO input name strings sorted in the same
+		order as the io-channels property. Consumers drivers
+		will use io-channel-names to match IIO input names
+		with IIO specifiers.
+io-channel-ranges:
+		Empty property indicating that child nodes can inherit named
+		IIO channels from this node. Useful for bus nodes to provide
+		and IIO channel to their children.
+
+For example:
+
+	device {
+		io-channels = <&adc 1>, <&ref 0>;
+		io-channel-names = "vcc", "vdd";
+	};
+
+This represents a device with two IIO inputs, named "vcc" and "vdd".
+The vcc channel is connected to output 1 of the &adc device, and the
+vdd channel is connected to output 0 of the &ref device.
+
+==Example==
+
+	adc: max1139@35 {
+		compatible = "maxim,max1139";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+	...
+
+	iio_hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
+			<&adc 3>, <&adc 4>, <&adc 5>,
+			<&adc 6>, <&adc 7>, <&adc 8>,
+			<&adc 9>;
+	};
+
+	some_consumer {
+		compatible = "some-consumer";
+		io-channels = <&adc 10>, <&adc 11>;
+		io-channel-names = "adc1", "adc2";
+	};
diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
new file mode 100644
index 000000000000..1a1b7cfa4845
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/dwc2.txt
@@ -0,0 +1,15 @@
+Platform DesignWare HS OTG USB 2.0 controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "snps,dwc2"
+- reg : Should contain 1 register range (address and length)
+- interrupts : Should contain 1 interrupt
+
+Example:
+
+        usb@101c0000 {
+                compatible = "ralink,rt3050-usb, snps,dwc2";
+                reg = <0x101c0000 40000>;
+                interrupts = <18>;
+        };
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index 07654f0338b6..8071ac20d4b3 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -26,7 +26,7 @@ Required properties:
 - crtc: the crtc this display is connected to, see below
 Optional properties:
 - interface_pix_fmt: How this display is connected to the
-  crtc. Currently supported types: "rgb24", "rgb565"
+  crtc. Currently supported types: "rgb24", "rgb565", "bgr666"
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel