ARM: dts: Enabling ehci-s5p driver for EXYNOS5250

Adding EHCI device tree node for Exynos5250 along with
the device base adress and gpio line for vbus.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 25 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
new file mode 100644
index 000000000000..e8bbb4799e26
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -0,0 +1,25 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};