Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)

13 files changed, 9422 insertions, 0 deletions

diff --git a/Documentation/DocBook/media/dvb/.gitignore b/Documentation/DocBook/media/dvb/.gitignore
new file mode 100644
index 000000000000..d7ec32eafac9
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/.gitignore
@@ -0,0 +1 @@
+!*.xml
diff --git a/Documentation/DocBook/media/dvb/audio.xml b/Documentation/DocBook/media/dvb/audio.xml
new file mode 100644
index 000000000000..d64386237207
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/audio.xml
@@ -0,0 +1,1203 @@
+<title>DVB Audio Device</title>
+<para>The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It
+can be accessed through <emphasis role="tt">/dev/dvb/adapter0/audio0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your
+application.
+</para>
+<para>Please note that some DVB cards don&#8217;t have their own MPEG decoder, which results in
+the omission of the audio and video device.
+</para>
+
+<section id="audio_data_types">
+<title>Audio Data Types</title>
+<para>This section describes the structures, data types and defines used when talking to the
+audio device.
+</para>
+
+<section id="audio-stream-source-t">
+<title>audio_stream_source_t</title>
+<para>The audio stream source is set through the AUDIO_SELECT_SOURCE call and can take
+the following values, depending on whether we are replaying from an internal (demux) or
+external (user write) source.
+</para>
+<programlisting>
+typedef enum {
+	AUDIO_SOURCE_DEMUX,
+	AUDIO_SOURCE_MEMORY
+} audio_stream_source_t;
+</programlisting>
+<para>AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the
+DVR device) as the source of the video stream. If AUDIO_SOURCE_MEMORY
+is selected the stream comes from the application through the <emphasis role="tt">write()</emphasis> system
+call.
+</para>
+
+</section>
+<section id="audio-play-state-t">
+<title>audio_play_state_t</title>
+<para>The following values can be returned by the AUDIO_GET_STATUS call representing the
+state of audio playback.
+</para>
+<programlisting>
+typedef enum {
+	AUDIO_STOPPED,
+	AUDIO_PLAYING,
+	AUDIO_PAUSED
+} audio_play_state_t;
+</programlisting>
+
+</section>
+<section id="audio-channel-select-t">
+<title>audio_channel_select_t</title>
+<para>The audio channel selected via AUDIO_CHANNEL_SELECT is determined by the
+following values.
+</para>
+<programlisting>
+typedef enum {
+	AUDIO_STEREO,
+	AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT,
+	AUDIO_MONO,
+	AUDIO_STEREO_SWAPPED
+} audio_channel_select_t;
+</programlisting>
+
+</section>
+<section id="audio-status">
+<title>struct audio_status</title>
+<para>The AUDIO_GET_STATUS call returns the following structure informing about various
+states of the playback operation.
+</para>
+<programlisting>
+typedef struct audio_status {
+	boolean AV_sync_state;
+	boolean mute_state;
+	audio_play_state_t play_state;
+	audio_stream_source_t stream_source;
+	audio_channel_select_t channel_select;
+	boolean bypass_mode;
+	audio_mixer_t mixer_state;
+} audio_status_t;
+</programlisting>
+
+</section>
+<section id="audio-mixer">
+<title>struct audio_mixer</title>
+<para>The following structure is used by the AUDIO_SET_MIXER call to set the audio
+volume.
+</para>
+<programlisting>
+typedef struct audio_mixer {
+	unsigned int volume_left;
+	unsigned int volume_right;
+} audio_mixer_t;
+</programlisting>
+
+</section>
+<section id="audio_encodings">
+<title>audio encodings</title>
+<para>A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the following
+bits set according to the hardwares capabilities.
+</para>
+<programlisting>
+ #define AUDIO_CAP_DTS    1
+ #define AUDIO_CAP_LPCM   2
+ #define AUDIO_CAP_MP1    4
+ #define AUDIO_CAP_MP2    8
+ #define AUDIO_CAP_MP3   16
+ #define AUDIO_CAP_AAC   32
+ #define AUDIO_CAP_OGG   64
+ #define AUDIO_CAP_SDDS 128
+ #define AUDIO_CAP_AC3  256
+</programlisting>
+
+</section>
+<section id="audio-karaoke">
+<title>struct audio_karaoke</title>
+<para>The ioctl AUDIO_SET_KARAOKE uses the following format:
+</para>
+<programlisting>
+typedef
+struct audio_karaoke {
+	int vocal1;
+	int vocal2;
+	int melody;
+} audio_karaoke_t;
+</programlisting>
+<para>If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t at 70% each. If both,
+Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed into the left channel and Vocal2 into the
+right channel at 100% each. Ff Melody is non-zero, the melody channel gets mixed into left
+and right.
+</para>
+
+</section>
+<section id="audio-attributes-t">
+<title>audio attributes</title>
+<para>The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES:
+</para>
+<programlisting>
+ typedef uint16_t audio_attributes_t;
+ /&#x22C6;   bits: descr. &#x22C6;/
+ /&#x22C6;   15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, &#x22C6;/
+ /&#x22C6;   12    multichannel extension &#x22C6;/
+ /&#x22C6;   11-10 audio type (0=not spec, 1=language included) &#x22C6;/
+ /&#x22C6;    9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) &#x22C6;/
+ /&#x22C6;    7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit,  &#x22C6;/
+ /&#x22C6;    5- 4 Sample frequency fs (0=48kHz, 1=96kHz) &#x22C6;/
+ /&#x22C6;    2- 0 number of audio channels (n+1 channels) &#x22C6;/
+</programlisting>
+ </section></section>
+<section id="audio_function_calls">
+<title>Audio Function Calls</title>
+
+
+<section id="audio_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call opens a named audio device (e.g. /dev/dvb/adapter0/audio0)
+ for subsequent use. When an open() call has succeeded, the device will be ready
+ for use. The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call. This is a standard system call, documented in the Linux
+ manual page for fcntl. Only one user can open the Audio Device in O_RDWR
+ mode. All other attempts to open the device in this mode will fail, and an error
+ code will be returned. If the Audio Device is opened in O_RDONLY mode, the
+ only ioctl call that can be used is AUDIO_GET_STATUS. All other call will
+ return with an error code.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific audio device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="audio_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened audio device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="audio_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call can only be used if AUDIO_SOURCE_MEMORY is selected
+ in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
+ PES format. If O_NONBLOCK is not specified the function will block until
+ buffer space is available. The amount of data to be transferred is implied by
+ count.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>size_t write(int fd, const void &#x22C6;buf, size_t count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer containing the PES data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode AUDIO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Attempted to write more data than the internal buffer can
+ hold.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_STOP"
+role="subsection"><title>AUDIO_STOP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to stop playing the current stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_STOP);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_STOP for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_PLAY"
+role="subsection"><title>AUDIO_PLAY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to start playing an audio stream from the
+ selected source.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_PLAY);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_PLAY for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_PAUSE"
+role="subsection"><title>AUDIO_PAUSE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call suspends the audio stream being played. Decoding and playing
+ are paused. It is then possible to restart again decoding and playing process of
+ the audio stream using AUDIO_CONTINUE command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>If AUDIO_SOURCE_MEMORY is selected in the ioctl call
+ AUDIO_SELECT_SOURCE, the DVB-subsystem will not decode (consume)
+ any more data until the ioctl call AUDIO_CONTINUE or AUDIO_PLAY is
+ performed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_PAUSE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_PAUSE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_CONTINUE"
+role="subsection"><title>AUDIO_CONTINUE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl restarts the decoding and playing process previously paused
+with AUDIO_PAUSE command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>It only works if the stream were previously stopped with AUDIO_PAUSE</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_CONTINUE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_CONTINUE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SELECT_SOURCE"
+role="subsection"><title>AUDIO_SELECT_SOURCE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call informs the audio device which source shall be used
+ for the input data. The possible sources are demux or memory. If
+ AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
+ through the write command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SELECT_SOURCE,
+ audio_stream_source_t source);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SELECT_SOURCE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_stream_source_t
+ source</para>
+</entry><entry
+ align="char">
+<para>Indicates the source that shall be used for the Audio
+ stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_MUTE"
+role="subsection"><title>AUDIO_SET_MUTE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the audio device to mute the stream that is currently being
+ played.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_MUTE,
+ boolean state);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_MUTE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean state</para>
+</entry><entry
+ align="char">
+<para>Indicates if audio device shall mute or not.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE Audio Mute</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE Audio Un-mute</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_AV_SYNC"
+role="subsection"><title>AUDIO_SET_AV_SYNC</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to turn ON or OFF A/V synchronization.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_AV_SYNC,
+ boolean state);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_AV_SYNC for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean state</para>
+</entry><entry
+ align="char">
+<para>Tells the DVB subsystem if A/V synchronization shall be
+ ON or OFF.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE AV-sync ON</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE AV-sync OFF</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_BYPASS_MODE"
+role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to bypass the Audio decoder and forward
+ the stream without decoding. This mode shall be used if streams that can&#8217;t be
+ handled by the DVB system shall be decoded. Dolby DigitalTM streams are
+ automatically forwarded by the DVB subsystem if the hardware can handle it.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_SET_BYPASS_MODE, boolean mode);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_BYPASS_MODE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean mode</para>
+</entry><entry
+ align="char">
+<para>Enables or disables the decoding of the current Audio
+ stream in the DVB subsystem.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE Bypass is disabled</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE Bypass is enabled</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_CHANNEL_SELECT"
+role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to select the requested channel if possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_CHANNEL_SELECT, audio_channel_select_t);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_CHANNEL_SELECT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_channel_select_t
+ ch</para>
+</entry><entry
+ align="char">
+<para>Select the output format of the audio (mono left/right,
+ stereo).</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_STATUS"
+role="subsection"><title>AUDIO_GET_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to return the current state of the Audio
+ Device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_GET_STATUS,
+ struct audio_status &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_STATUS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct audio_status
+ *status</para>
+</entry><entry
+ align="char">
+<para>Returns the current state of Audio Device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_CAPABILITIES"
+role="subsection"><title>AUDIO_GET_CAPABILITIES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to tell us about the decoding capabilities
+ of the audio hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_GET_CAPABILITIES, unsigned int &#x22C6;cap);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_CAPABILITIES for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned int *cap</para>
+</entry><entry
+ align="char">
+<para>Returns a bit array of supported sound formats.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_CLEAR_BUFFER"
+role="subsection"><title>AUDIO_CLEAR_BUFFER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to clear all software and hardware buffers
+ of the audio decoder device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_CLEAR_BUFFER for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_ID"
+role="subsection"><title>AUDIO_SET_ID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl selects which sub-stream is to be decoded if a program or system
+ stream is sent to the video device. If no audio stream type is set the id has to be
+ in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for AC3 and in [0xA0,0xA7]
+ for LPCM. More specifications may follow for other stream types. If the stream
+ type is set the id just specifies the substream id of the audio stream and only
+ the first 5 bits are recognized.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_ID, int
+ id);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int id</para>
+</entry><entry
+ align="char">
+<para>audio sub-stream id</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_MIXER"
+role="subsection"><title>AUDIO_SET_MIXER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl lets you adjust the mixer settings of the audio decoder.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_MIXER,
+ audio_mixer_t &#x22C6;mix);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_mixer_t *mix</para>
+</entry><entry
+ align="char">
+<para>mixer settings.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_STREAMTYPE"
+role="subsection"><title>AUDIO_SET_STREAMTYPE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl tells the driver which kind of audio stream to expect. This is useful
+ if the stream offers several audio sub-streams like LPCM and AC3.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_STREAMTYPE,
+ int type);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_STREAMTYPE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int type</para>
+</entry><entry
+ align="char">
+<para>stream type</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>type is not a valid or supported stream type.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_SET_EXT_ID"
+role="subsection"><title>AUDIO_SET_EXT_ID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl can be used to set the extension id for MPEG streams in DVD
+ playback. Only the first 3 bits are recognized.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_EXT_ID, int
+ id);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_EXT_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int id</para>
+</entry><entry
+ align="char">
+<para>audio sub_stream_id</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>id is not a valid id.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_SET_ATTRIBUTES"
+role="subsection"><title>AUDIO_SET_ATTRIBUTES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is intended for DVD playback and allows you to set certain
+ information about the audio stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES,
+ audio_attributes_t attr );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_ATTRIBUTES for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_attributes_t
+ attr</para>
+</entry><entry
+ align="char">
+<para>audio attributes according to section ??</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>attr is not a valid or supported attribute setting.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_SET_KARAOKE"
+role="subsection"><title>AUDIO_SET_KARAOKE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl allows one to set the mixer settings for a karaoke DVD.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_KARAOKE,
+ audio_karaoke_t &#x22C6;karaoke);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_KARAOKE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_karaoke_t
+ *karaoke</para>
+</entry><entry
+ align="char">
+<para>karaoke settings according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>karaoke is not a valid or supported karaoke setting.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section>
+</section>
diff --git a/Documentation/DocBook/media/dvb/ca.xml b/Documentation/DocBook/media/dvb/ca.xml
new file mode 100644
index 000000000000..5c4adb44b1c1
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/ca.xml
@@ -0,0 +1,229 @@
+<title>DVB CA Device</title>
+<para>The DVB CA device controls the conditional access hardware. It can be accessed through
+<emphasis role="tt">/dev/dvb/adapter0/ca0</emphasis>. Data types and and ioctl definitions can be accessed by
+including <emphasis role="tt">linux/dvb/ca.h</emphasis> in your application.
+</para>
+
+<section id="ca_data_types">
+<title>CA Data Types</title>
+
+
+<section id="ca-slot-info">
+<title>ca_slot_info_t</title>
+ <programlisting>
+typedef struct ca_slot_info {
+	int num;               /&#x22C6; slot number &#x22C6;/
+
+	int type;              /&#x22C6; CA interface this slot supports &#x22C6;/
+#define CA_CI            1     /&#x22C6; CI high level interface &#x22C6;/
+#define CA_CI_LINK       2     /&#x22C6; CI link layer level interface &#x22C6;/
+#define CA_CI_PHYS       4     /&#x22C6; CI physical layer level interface &#x22C6;/
+#define CA_DESCR         8     /&#x22C6; built-in descrambler &#x22C6;/
+#define CA_SC          128     /&#x22C6; simple smart card interface &#x22C6;/
+
+	unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /&#x22C6; module (or card) inserted &#x22C6;/
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
+</programlisting>
+
+</section>
+<section id="ca-descr-info">
+<title>ca_descr_info_t</title>
+<programlisting>
+typedef struct ca_descr_info {
+	unsigned int num;  /&#x22C6; number of available descramblers (keys) &#x22C6;/
+	unsigned int type; /&#x22C6; type of supported scrambling system &#x22C6;/
+#define CA_ECD           1
+#define CA_NDS           2
+#define CA_DSS           4
+} ca_descr_info_t;
+</programlisting>
+
+</section>
+<section id="ca-caps">
+<title>ca_caps_t</title>
+<programlisting>
+typedef struct ca_caps {
+	unsigned int slot_num;  /&#x22C6; total number of CA card and module slots &#x22C6;/
+	unsigned int slot_type; /&#x22C6; OR of all supported types &#x22C6;/
+	unsigned int descr_num; /&#x22C6; total number of descrambler slots (keys) &#x22C6;/
+	unsigned int descr_type;/&#x22C6; OR of all supported types &#x22C6;/
+ } ca_cap_t;
+</programlisting>
+
+</section>
+<section id="ca-msg">
+<title>ca_msg_t</title>
+<programlisting>
+/&#x22C6; a message to/from a CI-CAM &#x22C6;/
+typedef struct ca_msg {
+	unsigned int index;
+	unsigned int type;
+	unsigned int length;
+	unsigned char msg[256];
+} ca_msg_t;
+</programlisting>
+
+</section>
+<section id="ca-descr">
+<title>ca_descr_t</title>
+<programlisting>
+typedef struct ca_descr {
+	unsigned int index;
+	unsigned int parity;
+	unsigned char cw[8];
+} ca_descr_t;
+</programlisting>
+</section>
+
+<section id="ca-pid">
+<title>ca-pid</title>
+<programlisting>
+typedef struct ca_pid {
+	unsigned int pid;
+	int index;		/&#x22C6; -1 == disable&#x22C6;/
+} ca_pid_t;
+</programlisting>
+</section></section>
+
+<section id="ca_function_calls">
+<title>CA Function Calls</title>
+
+
+<section id="ca_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call opens a named ca device (e.g. /dev/ost/ca) for subsequent use.</para>
+<para>When an open() call has succeeded, the device will be ready for use.
+ The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call. This is a standard system call, documented in the Linux
+ manual page for fcntl. Only one user can open the CA Device in O_RDWR
+ mode. All other attempts to open the device in this mode will fail, and an error
+ code will be returned.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="ca_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened audio device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section>
+</section>
diff --git a/Documentation/DocBook/media/dvb/demux.xml b/Documentation/DocBook/media/dvb/demux.xml
new file mode 100644
index 000000000000..37c17908aa40
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/demux.xml
@@ -0,0 +1,902 @@
+<title>DVB Demux Device</title>
+
+<para>The DVB demux device controls the filters of the DVB hardware/software. It can be
+accessed through <emphasis role="tt">/dev/adapter0/demux0</emphasis>. Data types and and ioctl definitions can be
+accessed by including <emphasis role="tt">linux/dvb/dmx.h</emphasis> in your application.
+</para>
+<section id="dmx_types">
+<title>Demux Data Types</title>
+
+<section id="dmx-output-t">
+<title>dmx_output_t</title>
+<programlisting>
+typedef enum
+{
+	DMX_OUT_DECODER, /&#x22C6; Streaming directly to decoder. &#x22C6;/
+	DMX_OUT_TAP,     /&#x22C6; Output going to a memory buffer &#x22C6;/
+			 /&#x22C6; (to be retrieved via the read command).&#x22C6;/
+	DMX_OUT_TS_TAP,  /&#x22C6; Output multiplexed into a new TS  &#x22C6;/
+			 /&#x22C6; (to be retrieved by reading from the &#x22C6;/
+			 /&#x22C6; logical DVR device).                 &#x22C6;/
+	DMX_OUT_TSDEMUX_TAP /&#x22C6; Like TS_TAP but retrieved from the DMX device &#x22C6;/
+} dmx_output_t;
+</programlisting>
+<para><emphasis role="tt">DMX_OUT_TAP</emphasis> delivers the stream output to the demux device on which the ioctl is
+called.
+</para>
+<para><emphasis role="tt">DMX_OUT_TS_TAP</emphasis> routes output to the logical DVR device <emphasis role="tt">/dev/dvb/adapter0/dvr0</emphasis>,
+which delivers a TS multiplexed from all filters for which <emphasis role="tt">DMX_OUT_TS_TAP</emphasis> was
+specified.
+</para>
+</section>
+
+<section id="dmx-input-t">
+<title>dmx_input_t</title>
+<programlisting>
+typedef enum
+{
+	DMX_IN_FRONTEND, /&#x22C6; Input from a front-end device.  &#x22C6;/
+	DMX_IN_DVR       /&#x22C6; Input from the logical DVR device.  &#x22C6;/
+} dmx_input_t;
+</programlisting>
+</section>
+
+<section id="dmx-pes-type-t">
+<title>dmx_pes_type_t</title>
+<programlisting>
+typedef enum
+{
+	DMX_PES_AUDIO0,
+	DMX_PES_VIDEO0,
+	DMX_PES_TELETEXT0,
+	DMX_PES_SUBTITLE0,
+	DMX_PES_PCR0,
+
+	DMX_PES_AUDIO1,
+	DMX_PES_VIDEO1,
+	DMX_PES_TELETEXT1,
+	DMX_PES_SUBTITLE1,
+	DMX_PES_PCR1,
+
+	DMX_PES_AUDIO2,
+	DMX_PES_VIDEO2,
+	DMX_PES_TELETEXT2,
+	DMX_PES_SUBTITLE2,
+	DMX_PES_PCR2,
+
+	DMX_PES_AUDIO3,
+	DMX_PES_VIDEO3,
+	DMX_PES_TELETEXT3,
+	DMX_PES_SUBTITLE3,
+	DMX_PES_PCR3,
+
+	DMX_PES_OTHER
+} dmx_pes_type_t;
+</programlisting>
+</section>
+
+<section id="dmx-filter">
+<title>struct dmx_filter</title>
+ <programlisting>
+ typedef struct dmx_filter
+{
+	__u8  filter[DMX_FILTER_SIZE];
+	__u8  mask[DMX_FILTER_SIZE];
+	__u8  mode[DMX_FILTER_SIZE];
+} dmx_filter_t;
+</programlisting>
+</section>
+
+<section id="dmx-sct-filter-params">
+<title>struct dmx_sct_filter_params</title>
+<programlisting>
+struct dmx_sct_filter_params
+{
+	__u16          pid;
+	dmx_filter_t   filter;
+	__u32          timeout;
+	__u32          flags;
+#define DMX_CHECK_CRC       1
+#define DMX_ONESHOT         2
+#define DMX_IMMEDIATE_START 4
+#define DMX_KERNEL_CLIENT   0x8000
+};
+</programlisting>
+</section>
+
+<section id="dmx-pes-filter-params">
+<title>struct dmx_pes_filter_params</title>
+<programlisting>
+struct dmx_pes_filter_params
+{
+	__u16          pid;
+	dmx_input_t    input;
+	dmx_output_t   output;
+	dmx_pes_type_t pes_type;
+	__u32          flags;
+};
+</programlisting>
+</section>
+
+<section id="dmx-event">
+<title>struct dmx_event</title>
+ <programlisting>
+ struct dmx_event
+ {
+	 dmx_event_t          event;
+	 time_t               timeStamp;
+	 union
+	 {
+		 dmx_scrambling_status_t scrambling;
+	 } u;
+ };
+</programlisting>
+</section>
+
+<section id="dmx-stc">
+<title>struct dmx_stc</title>
+<programlisting>
+struct dmx_stc {
+	unsigned int num;	/&#x22C6; input : which STC? 0..N &#x22C6;/
+	unsigned int base;	/&#x22C6; output: divisor for stc to get 90 kHz clock &#x22C6;/
+	__u64 stc;		/&#x22C6; output: stc in 'base'&#x22C6;90 kHz units &#x22C6;/
+};
+</programlisting>
+</section>
+
+<section id="dmx-caps">
+<title>struct dmx_caps</title>
+<programlisting>
+ typedef struct dmx_caps {
+	__u32 caps;
+	int num_decoders;
+} dmx_caps_t;
+</programlisting>
+</section>
+
+<section id="dmx-source-t">
+<title>enum dmx_source_t</title>
+<programlisting>
+typedef enum {
+	DMX_SOURCE_FRONT0 = 0,
+	DMX_SOURCE_FRONT1,
+	DMX_SOURCE_FRONT2,
+	DMX_SOURCE_FRONT3,
+	DMX_SOURCE_DVR0   = 16,
+	DMX_SOURCE_DVR1,
+	DMX_SOURCE_DVR2,
+	DMX_SOURCE_DVR3
+} dmx_source_t;
+</programlisting>
+</section>
+
+</section>
+<section id="dmx_fcalls">
+<title>Demux Function Calls</title>
+
+<section id="dmx_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call, used with a device name of /dev/dvb/adapter0/demux0,
+ allocates a new filter and returns a handle which can be used for subsequent
+ control of that filter. This call has to be made for each filter to be used, i.e. every
+ returned file descriptor is a reference to a single filter. /dev/dvb/adapter0/dvr0
+ is a logical device to be used for retrieving Transport Streams for digital
+ video recording. When reading from this device a transport stream containing
+ the packets from all PES filters set in the corresponding demux device
+ (/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A
+ recorded Transport Stream is replayed by writing to this device. </para>
+<para>The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of demux device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EMFILE</para>
+</entry><entry
+ align="char">
+<para>&#8220;Too many open files&#8221;, i.e. no more filters available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOMEM</para>
+</entry><entry
+ align="char">
+<para>The driver failed to allocate enough memory.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="dmx_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call deactivates and deallocates a filter that was previously
+ allocated via the open() call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="dmx_fread">
+<title>read()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call returns filtered data, which might be section or PES data. The
+ filtered data is transferred from the driver&#8217;s internal circular buffer to buf. The
+ maximum amount of data to be transferred is implied by count.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>When returning section data the driver always tries to return a complete single
+ section (even though buf would provide buffer space for more data). If the size
+ of the buffer is smaller than the section as much as possible will be returned,
+ and the remaining data will be provided in subsequent calls.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The size of the internal buffer is 2 * 4096 bytes (the size of two maximum
+ sized sections) by default. The size of this buffer may be changed by using the
+ DMX_SET_BUFFER_SIZE function. If the buffer is not large enough, or if
+ the read operations are not performed fast enough, this may result in a buffer
+ overflow error. In this case EOVERFLOW will be returned, and the circular
+ buffer will be emptied. This call is blocking if there is no data to return, i.e. the
+ process will be put to sleep waiting for data, unless the O_NONBLOCK flag
+ is specified.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Note that in order to be able to read, the filtering process has to be started
+ by defining either a section or a PES filter by means of the ioctl functions,
+ and then starting the filtering process via the DMX_START ioctl function
+ or by setting the DMX_IMMEDIATE_START flag. If the reading is done
+ from a logical DVR demux device, the data will constitute a Transport Stream
+ including the packets from all PES filters in the corresponding demux device
+ /dev/dvb/adapter0/demux0 having the output set to DMX_OUT_TS_TAP.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>size_t read(int fd, void &#x22C6;buf, size_t count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer to be used for returned filtered data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>No data to return and O_NONBLOCK was specified.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ECRC</para>
+</entry><entry
+ align="char">
+<para>Last section had a CRC error - no data returned. The
+ buffer is flushed.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>The filtered data was not read from the buffer in due
+ time, resulting in non-read data being lost. The buffer is
+ flushed.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ETIMEDOUT</para>
+</entry><entry
+ align="char">
+<para>The section was not loaded within the stated timeout
+ period. See ioctl DMX_SET_FILTER for how to set a
+ timeout.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>The driver failed to write to the callers buffer due to an
+ invalid *buf pointer.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="dmx_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call is only provided by the logical device /dev/dvb/adapter0/dvr0,
+ associated with the physical demux device that provides the actual DVR
+ functionality. It is used for replay of a digitally recorded Transport Stream.
+ Matching filters have to be defined in the corresponding physical demux
+ device, /dev/dvb/adapter0/demux0. The amount of data to be transferred is
+ implied by count.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>ssize_t write(int fd, const void &#x22C6;buf, size_t
+ count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer containing the Transport Stream.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>No data was written. This
+ might happen if O_NONBLOCK was specified and there
+ is no more buffer space available (if O_NONBLOCK is
+ not specified the function will block until buffer space is
+ available).</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>This error code indicates that there are conflicting
+ requests. The corresponding demux device is setup to
+ receive data from the front- end. Make sure that these
+ filters are stopped and that the filters with input set to
+ DMX_IN_DVR are started.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_START">
+<title>DMX_START</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to start the actual filtering operation defined via the ioctl
+ calls DMX_SET_FILTER or DMX_SET_PES_FILTER.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_START);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_START for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument, i.e. no filtering parameters provided via
+ the DMX_SET_FILTER or DMX_SET_PES_FILTER
+ functions.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>This error code indicates that there are conflicting
+ requests. There are active filters filtering data from
+ another input source. Make sure that these filters are
+ stopped before starting this filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_STOP">
+<title>DMX_STOP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to stop the actual filtering operation defined via the
+ ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and started via
+ the DMX_START command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_STOP);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_STOP for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_SET_FILTER">
+<title>DMX_SET_FILTER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets up a filter according to the filter and mask parameters
+ provided. A timeout may be defined stating number of seconds to wait for a
+ section to be loaded. A value of 0 means that no timeout should be applied.
+ Finally there is a flag field where it is possible to state whether a section should
+ be CRC-checked, whether the filter should be a &#8221;one-shot&#8221; filter, i.e. if the
+ filtering operation should be stopped after the first section is received, and
+ whether the filtering operation should be started immediately (without waiting
+ for a DMX_START ioctl call). If a filter was previously set-up, this filter will
+ be canceled, and the receive buffer will be flushed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_SET_FILTER,
+ struct dmx_sct_filter_params &#x22C6;params);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_FILTER for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dmx_sct_filter_params
+ *params</para>
+</entry><entry
+ align="char">
+<para>Pointer to structure containing filter parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_SET_PES_FILTER">
+<title>DMX_SET_PES_FILTER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets up a PES filter according to the parameters provided. By a
+ PES filter is meant a filter that is based just on the packet identifier (PID), i.e.
+ no PES header or payload filtering capability is supported.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The transport stream destination for the filtered output may be set. Also the
+ PES type may be stated in order to be able to e.g. direct a video stream directly
+ to the video decoder. Finally there is a flag field where it is possible to state
+ whether the filtering operation should be started immediately (without waiting
+ for a DMX_START ioctl call). If a filter was previously set-up, this filter will
+ be cancelled, and the receive buffer will be flushed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_SET_PES_FILTER,
+ struct dmx_pes_filter_params &#x22C6;params);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_PES_FILTER for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dmx_pes_filter_params
+ *params</para>
+</entry><entry
+ align="char">
+<para>Pointer to structure containing filter parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>This error code indicates that there are conflicting
+ requests. There are active filters filtering data from
+ another input source. Make sure that these filters are
+ stopped before starting this filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_SET_BUFFER_SIZE">
+<title>DMX_SET_BUFFER_SIZE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to set the size of the circular buffer used for filtered data.
+ The default size is two maximum sized sections, i.e. if this function is not called
+ a buffer size of 2 * 4096 bytes will be used.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ DMX_SET_BUFFER_SIZE, unsigned long size);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_BUFFER_SIZE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned long size</para>
+</entry><entry
+ align="char">
+<para>Size of circular buffer.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_GET_EVENT">
+<title>DMX_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns an event if available. If an event is not available,
+ the behavior depends on whether the device is in blocking or non-blocking
+ mode. In the latter case, the call fails immediately with errno set to
+ EWOULDBLOCK. In the former case, the call blocks until an event becomes
+ available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The standard Linux poll() and/or select() system calls can be used with the
+ device file descriptor to watch for new events. For select(), the file descriptor
+ should be included in the exceptfds argument, and for poll(), POLLPRI should
+ be specified as the wake-up condition. Only the latest event for each filter is
+ saved.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_GET_EVENT,
+ struct dmx_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_EVENT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dmx_event *ev</para>
+</entry><entry
+ align="char">
+<para>Pointer to the location where the event is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_GET_STC">
+<title>DMX_GET_STC</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the current value of the system time counter (which is driven
+ by a PES filter of type DMX_PES_PCR). Some hardware supports more than one
+ STC, so you must specify which one by setting the num field of stc before the ioctl
+ (range 0...n). The result is returned in form of a ratio with a 64 bit numerator
+ and a 32 bit denominator, so the real 90kHz STC value is stc-&#x003E;stc /
+ stc-&#x003E;base
+ .</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_GET_STC, struct
+ dmx_stc &#x22C6;stc);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_STC for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dmx_stc *stc</para>
+</entry><entry
+ align="char">
+<para>Pointer to the location where the stc is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid stc number.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml
new file mode 100644
index 000000000000..2ab6ddcfc4e0
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/dvbapi.xml
@@ -0,0 +1,141 @@
+<partinfo>
+<authorgroup>
+<author>
+<firstname>Ralph</firstname>
+<surname>Metzler</surname>
+<othername role="mi">J. K.</othername>
+<affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
+</author>
+<author>
+<firstname>Marcus</firstname>
+<surname>Metzler</surname>
+<othername role="mi">O. C.</othername>
+<affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
+</author>
+</authorgroup>
+<authorgroup>
+<author>
+<firstname>Mauro</firstname>
+<othername role="mi">Carvalho</othername>
+<surname>Chehab</surname>
+<affiliation><address><email>mchehab@redhat.com</email></address></affiliation>
+<contrib>Ported document to Docbook XML.</contrib>
+</author>
+</authorgroup>
+<copyright>
+	<year>2002</year>
+	<year>2003</year>
+	<holder>Convergence GmbH</holder>
+</copyright>
+<copyright>
+	<year>2009-2011</year>
+	<holder>Mauro Carvalho Chehab</holder>
+</copyright>
+
+<revhistory>
+<!-- Put document revisions here, newest first. -->
+<revision>
+	<revnumber>2.0.4</revnumber>
+	<date>2011-05-06</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add more information about DVB APIv5, better describing the frontend GET/SET props ioctl's.
+	</revremark>
+</revision>
+<revision>
+	<revnumber>2.0.3</revnumber>
+	<date>2010-07-03</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add some frontend capabilities flags, present on kernel, but missing at the specs.
+	</revremark>
+</revision>
+<revision>
+	<revnumber>2.0.2</revnumber>
+	<date>2009-10-25</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		documents FE_SET_FRONTEND_TUNE_MODE and FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
+	</revremark>
+</revision>
+<revision>
+<revnumber>2.0.1</revnumber>
+<date>2009-09-16</date>
+<authorinitials>mcc</authorinitials>
+<revremark>
+Added ISDB-T test originally written by Patrick Boettcher
+</revremark>
+</revision>
+<revision>
+<revnumber>2.0.0</revnumber>
+<date>2009-09-06</date>
+<authorinitials>mcc</authorinitials>
+<revremark>Conversion from LaTex to DocBook XML. The
+	contents is the same as the original LaTex version.</revremark>
+</revision>
+<revision>
+<revnumber>1.0.0</revnumber>
+<date>2003-07-24</date>
+<authorinitials>rjkm</authorinitials>
+<revremark>Initial revision on LaTEX.</revremark>
+</revision>
+</revhistory>
+</partinfo>
+
+
+<title>LINUX DVB API</title>
+<subtitle>Version 5.2</subtitle>
+<!-- ADD THE CHAPTERS HERE -->
+  <chapter id="dvb_introdution">
+    &sub-intro;
+  </chapter>
+  <chapter id="dvb_frontend">
+    &sub-frontend;
+  </chapter>
+  <chapter id="dvb_demux">
+    &sub-demux;
+  </chapter>
+  <chapter id="dvb_video">
+    &sub-video;
+  </chapter>
+  <chapter id="dvb_audio">
+    &sub-audio;
+  </chapter>
+  <chapter id="dvb_ca">
+    &sub-ca;
+  </chapter>
+  <chapter id="dvb_net">
+    &sub-net;
+  </chapter>
+  <chapter id="dvb_kdapi">
+    &sub-kdapi;
+  </chapter>
+  <chapter id="dvb_examples">
+    &sub-examples;
+  </chapter>
+<!-- END OF CHAPTERS -->
+  <appendix id="audio_h">
+    <title>DVB Audio Header File</title>
+    &sub-audio-h;
+  </appendix>
+  <appendix id="ca_h">
+    <title>DVB Conditional Access Header File</title>
+    &sub-ca-h;
+  </appendix>
+  <appendix id="dmx_h">
+    <title>DVB Demux Header File</title>
+    &sub-dmx-h;
+  </appendix>
+  <appendix id="frontend_h">
+    <title>DVB Frontend Header File</title>
+    &sub-frontend-h;
+  </appendix>
+  <appendix id="net_h">
+    <title>DVB Network Header File</title>
+    &sub-net-h;
+  </appendix>
+  <appendix id="video_h">
+    <title>DVB Video Header File</title>
+    &sub-video-h;
+  </appendix>
+
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
new file mode 100644
index 000000000000..207e1a5bf8f0
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -0,0 +1,859 @@
+<section id="FE_GET_SET_PROPERTY">
+<title><constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></title>
+<para>This section describes the DVB version 5 extention of the DVB-API, also
+called "S2API", as this API were added to provide support for DVB-S2. It was
+designed to be able to replace the old frontend API. Yet, the DISEQC and
+the capability ioctls weren't implemented yet via the new way.</para>
+<para>The typical usage for the <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant>
+API is to replace the ioctl's were the <link linkend="dvb-frontend-parameters">
+struct <constant>dvb_frontend_parameters</constant></link> were used.</para>
+<section id="dtv-property">
+<title>DTV property type</title>
+<programlisting>
+/* Reserved fields should be set to 0 */
+struct dtv_property {
+	__u32 cmd;
+	union {
+		__u32 data;
+		struct {
+			__u8 data[32];
+			__u32 len;
+			__u32 reserved1[3];
+			void *reserved2;
+		} buffer;
+	} u;
+	int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+</programlisting>
+</section>
+<section id="dtv-properties">
+<title>DTV properties type</title>
+<programlisting>
+struct dtv_properties {
+	__u32 num;
+	struct dtv_property *props;
+};
+</programlisting>
+</section>
+
+<section id="FE_GET_PROPERTY">
+<title>FE_GET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_SET_PROPERTY">
+<title>FE_SET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section>
+	<title>Property types</title>
+<para>
+On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to
+get/set up to 64 properties. The actual meaning of each property is described on the next sections.
+</para>
+
+<para>The available frontend property types are shown on the next section.</para>
+</section>
+
+<section id="fe_property_parameters">
+	<title>Digital TV property parameters</title>
+	<section id="DTV-UNDEFINED">
+	<title><constant>DTV_UNDEFINED</constant></title>
+	<para>Used internally. A GET/SET operation for it won't change or return anything.</para>
+	</section>
+	<section id="DTV-TUNE">
+	<title><constant>DTV_TUNE</constant></title>
+	<para>Interpret the cache of data, build either a traditional frontend tunerequest so we can pass validation in the <constant>FE_SET_FRONTEND</constant> ioctl.</para>
+	</section>
+	<section id="DTV-CLEAR">
+	<title><constant>DTV_CLEAR</constant></title>
+	<para>Reset a cache of data specific to the frontend here. This does not effect hardware.</para>
+	</section>
+	<section id="DTV-FREQUENCY">
+		<title><constant>DTV_FREQUENCY</constant></title>
+
+		<para>Central frequency of the channel, in HZ.</para>
+
+		<para>Notes:</para>
+		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
+			the channel which is 6MHz.</para>
+
+		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
+			central frequency of the channel is expected.</para>
+	</section>
+	<section id="DTV-MODULATION">
+	<title><constant>DTV_MODULATION</constant></title>
+<para>Specifies the frontend modulation type for cable and satellite types. The modulation can be one of the types bellow:</para>
+<programlisting>
+ typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
+ } fe_modulation_t;
+</programlisting>
+	</section>
+	<section id="DTV-BANDWIDTH-HZ">
+		<title><constant>DTV_BANDWIDTH_HZ</constant></title>
+
+		<para>Bandwidth for the channel, in HZ.</para>
+
+		<para>Possible values:
+			<constant>1712000</constant>,
+			<constant>5000000</constant>,
+			<constant>6000000</constant>,
+			<constant>7000000</constant>,
+			<constant>8000000</constant>,
+			<constant>10000000</constant>.
+		</para>
+
+		<para>Notes:</para>
+
+		<para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para>
+		<para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para>
+		<para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth
+			 for DVB-C depends on the symbol rate</para>
+		<para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
+			other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
+			DTV_ISDBT_SB_SEGMENT_COUNT).</para>
+		<para>5) DVB-T supports 6, 7 and 8MHz.</para>
+		<para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para>
+	</section>
+	<section id="DTV-INVERSION">
+	<title><constant>DTV_INVERSION</constant></title>
+	<para>The Inversion field can take one of these values:
+	</para>
+	<programlisting>
+	typedef enum fe_spectral_inversion {
+		INVERSION_OFF,
+		INVERSION_ON,
+		INVERSION_AUTO
+	} fe_spectral_inversion_t;
+	</programlisting>
+	<para>It indicates if spectral inversion should be presumed or not. In the automatic setting
+	(<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
+	itself.
+	</para>
+	</section>
+	<section id="DTV-DISEQC-MASTER">
+	<title><constant>DTV_DISEQC_MASTER</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-SYMBOL-RATE">
+	<title><constant>DTV_SYMBOL_RATE</constant></title>
+	<para>Digital TV symbol rate, in bauds (symbols/second). Used on cable standards.</para>
+	</section>
+	<section id="DTV-INNER-FEC">
+	<title><constant>DTV_INNER_FEC</constant></title>
+	<para>Used cable/satellite transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	<para>which correspond to error correction rates of 1/2, 2/3, etc.,
+	no error correction or auto detection.</para>
+	</section>
+	<section id="DTV-VOLTAGE">
+	<title><constant>DTV_VOLTAGE</constant></title>
+	<para>The voltage is usually used with non-DiSEqC capable LNBs to switch
+	the polarzation (horizontal/vertical). When using DiSEqC epuipment this
+	voltage has to be switched consistently to the DiSEqC commands as
+	described in the DiSEqC spec.</para>
+	<programlisting>
+		typedef enum fe_sec_voltage {
+		SEC_VOLTAGE_13,
+		SEC_VOLTAGE_18
+		} fe_sec_voltage_t;
+	</programlisting>
+	</section>
+	<section id="DTV-TONE">
+	<title><constant>DTV_TONE</constant></title>
+	<para>Currently not used.</para>
+	</section>
+	<section id="DTV-PILOT">
+	<title><constant>DTV_PILOT</constant></title>
+	<para>Sets DVB-S2 pilot</para>
+	<section id="fe-pilot-t">
+		<title>fe_pilot type</title>
+		<programlisting>
+typedef enum fe_pilot {
+	PILOT_ON,
+	PILOT_OFF,
+	PILOT_AUTO,
+} fe_pilot_t;
+		</programlisting>
+		</section>
+	</section>
+	<section id="DTV-ROLLOFF">
+	<title><constant>DTV_ROLLOFF</constant></title>
+		<para>Sets DVB-S2 rolloff</para>
+
+	<section id="fe-rolloff-t">
+		<title>fe_rolloff type</title>
+		<programlisting>
+typedef enum fe_rolloff {
+	ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+	ROLLOFF_20,
+	ROLLOFF_25,
+	ROLLOFF_AUTO,
+} fe_rolloff_t;
+		</programlisting>
+		</section>
+	</section>
+	<section id="DTV-DISEQC-SLAVE-REPLY">
+	<title><constant>DTV_DISEQC_SLAVE_REPLY</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-FE-CAPABILITY-COUNT">
+	<title><constant>DTV_FE_CAPABILITY_COUNT</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-FE-CAPABILITY">
+	<title><constant>DTV_FE_CAPABILITY</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-DELIVERY-SYSTEM">
+		<title><constant>DTV_DELIVERY_SYSTEM</constant></title>
+		<para>Specifies the type of Delivery system</para>
+		<section id="fe-delivery-system-t">
+		<title>fe_delivery_system type</title>
+		<para>Possible values: </para>
+<programlisting>
+typedef enum fe_delivery_system {
+	SYS_UNDEFINED,
+	SYS_DVBC_ANNEX_AC,
+	SYS_DVBC_ANNEX_B,
+	SYS_DVBT,
+	SYS_DSS,
+	SYS_DVBS,
+	SYS_DVBS2,
+	SYS_DVBH,
+	SYS_ISDBT,
+	SYS_ISDBS,
+	SYS_ISDBC,
+	SYS_ATSC,
+	SYS_ATSCMH,
+	SYS_DMBTH,
+	SYS_CMMB,
+	SYS_DAB,
+	SYS_DVBT2,
+} fe_delivery_system_t;
+</programlisting>
+		</section>
+	</section>
+	<section id="DTV-ISDBT-PARTIAL-RECEPTION">
+		<title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>
+
+		<para>If <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
+			the channel is in partial reception mode or not.</para>
+
+		<para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
+			<constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>
+
+		<para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
+			<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
+			is consisting of one segment and layer or three segments and two layers.</para>
+
+		<para>Possible values: 0, 1, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SOUND-BROADCASTING">
+		<title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>
+
+		<para>This field represents whether the other DTV_ISDBT_*-parameters are
+			referring to an ISDB-T and an ISDB-Tsb channel. (See also
+			<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>
+
+		<para>Possible values: 0, 1, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SUBCHANNEL-ID">
+		<title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>
+
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+
+		<para>(Note of the author: This might not be the correct description of the
+			<constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
+			background needed to program a device)</para>
+
+		<para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
+			set of connected ISDB-Tsb channels. In this set of channels every
+			channel can be received independently. The number of connected
+			ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
+			bandwidth available.</para>
+
+		<para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
+			broadcaster has several possibilities to put those channels in the
+			air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
+			segments from position 1-8 to 5-13 or anything in between.</para>
+
+		<para>The underlying layer of segments are subchannels: each segment is
+			consisting of several subchannels with a predefined IDs. A sub-channel
+			is used to help the demodulator to synchronize on the channel.</para>
+
+		<para>An ISDB-T channel is always centered over all sub-channels. As for
+			the example above, in ISDB-Tsb it is no longer as simple as that.</para>
+
+		<para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
+			sub-channel ID of the segment to be demodulated.</para>
+
+		<para>Possible values: 0 .. 41, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SEGMENT-IDX">
+		<title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+		<para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
+			demodulated for an ISDB-Tsb channel where several of them are
+			transmitted in the connected manner.</para>
+		<para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>
+		<para>Note: This value cannot be determined by an automatic channel search.</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SEGMENT-COUNT">
+		<title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+		<para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
+			channels.</para>
+		<para>Possible values: 1 .. 13</para>
+		<para>Note: This value cannot be determined by an automatic channel search.</para>
+	</section>
+	<section id="isdb-hierq-layers">
+		<title><constant>DTV-ISDBT-LAYER*</constant> parameters</title>
+		<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
+			ISDB-T hierarchical layers can be decoded simultaneously. For that
+			reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>
+		<para>ISDB-T has 3 hierarchical layers which each can use a part of the
+			available segments. The total number of segments over all layers has
+			to 13 in ISDB-T.</para>
+		<para>There are 3 parameter sets, for Layers A, B and C.</para>
+		<section id="DTV-ISDBT-LAYER-ENABLED">
+			<title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>
+			<para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
+				layers in the decoding process. Setting all bits of
+				<constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
+				demodulated. This is the default.</para>
+			<para>If the channel is in the partial reception mode
+				(<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
+				independently of the other 12 segments. In that mode layer A has to
+				have a <constant>SEGMENT_COUNT</constant> of 1.</para>
+			<para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
+				according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
+				accordingly.</para>
+			<para>Possible values: 0x1, 0x2, 0x4 (|-able)</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-FEC">
+			<title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>
+			<para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-MODULATION">
+			<title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>
+			<para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>
+			<para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
+				and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-SEGMENT-COUNT">
+			<title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>
+			<para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>
+			<para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
+				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>
+			<informaltable id="isdbt-layer_seg-cnt-table">
+				<tgroup cols="6">
+					<tbody>
+						<row>
+							<entry>PR</entry>
+							<entry>SB</entry>
+							<entry>Layer A width</entry>
+							<entry>Layer B width</entry>
+							<entry>Layer C width</entry>
+							<entry>total width</entry>
+						</row>
+						<row>
+							<entry>0</entry>
+							<entry>0</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>13</entry>
+						</row>
+						<row>
+							<entry>1</entry>
+							<entry>0</entry>
+							<entry>1</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>13</entry>
+						</row>
+						<row>
+							<entry>0</entry>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>0</entry>
+							<entry>0</entry>
+							<entry>1</entry>
+						</row>
+						<row>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>2</entry>
+							<entry>0</entry>
+							<entry>13</entry>
+						</row>
+					</tbody>
+				</tgroup>
+			</informaltable>
+		</section>
+		<section id="DTV-ISDBT-LAYER-TIME-INTERLEAVING">
+			<title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>
+			<para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>
+			<para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
+				here are referring to what can be found in the TMCC-structure -
+				independent of the mode.</para>
+		</section>
+	</section>
+	<section id="DTV-API-VERSION">
+	<title><constant>DTV_API_VERSION</constant></title>
+	<para>Returns the major/minor version of the DVB API</para>
+	</section>
+	<section id="DTV-CODE-RATE-HP">
+	<title><constant>DTV_CODE_RATE_HP</constant></title>
+	<para>Used on terrestrial transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	</section>
+	<section id="DTV-CODE-RATE-LP">
+	<title><constant>DTV_CODE_RATE_LP</constant></title>
+	<para>Used on terrestrial transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	</section>
+	<section id="DTV-GUARD-INTERVAL">
+		<title><constant>DTV_GUARD_INTERVAL</constant></title>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
+</programlisting>
+
+		<para>Notes:</para>
+		<para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
+			try to find the correct guard interval (if capable) and will use TMCC to fill
+			in the missing parameters.</para>
+		<para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para>
+	</section>
+	<section id="DTV-TRANSMISSION-MODE">
+		<title><constant>DTV_TRANSMISSION_MODE</constant></title>
+
+		<para>Specifies the number of carriers used by the standard</para>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+} fe_transmit_mode_t;
+</programlisting>
+		<para>Notes:</para>
+		<para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
+			'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
+
+		<para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
+			hardware will try to find the correct FFT-size (if capable) and will
+			use TMCC to fill in the missing parameters.</para>
+		<para>3) DVB-T specifies 2K and 8K as valid sizes.</para>
+		<para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para>
+	</section>
+	<section id="DTV-HIERARCHY">
+	<title><constant>DTV_HIERARCHY</constant></title>
+	<para>Frontend hierarchy</para>
+	<programlisting>
+typedef enum fe_hierarchy {
+	 HIERARCHY_NONE,
+	 HIERARCHY_1,
+	 HIERARCHY_2,
+	 HIERARCHY_4,
+	 HIERARCHY_AUTO
+ } fe_hierarchy_t;
+	</programlisting>
+	</section>
+	<section id="DTV-ISDBS-TS-ID">
+	<title><constant>DTV_ISDBS_TS_ID</constant></title>
+	<para>Currently unused.</para>
+	</section>
+	<section id="DTV-DVBT2-PLP-ID">
+		<title><constant>DTV_DVBT2_PLP_ID</constant></title>
+		<para>DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of
+			many data types via a single multiplex. The API will soon support this
+			at which point this section will be expanded.</para>
+	</section>
+</section>
+	<section id="frontend-property-terrestrial-systems">
+	<title>Properties used on terrestrial delivery systems</title>
+		<section id="dvbt-params">
+			<title>DVB-T delivery system</title>
+			<para>The following parameters are valid for DVB-T:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			</itemizedlist>
+		</section>
+		<section id="dvbt2-params">
+			<title>DVB-T2 delivery system</title>
+			<para>DVB-T2 support is currently in the early stages
+			of development, so expect that this section maygrow and become
+			more detailed with time.</para>
+		<para>The following parameters are valid for DVB-T2:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DVBT2-PLP-ID"><constant>DTV_DVBT2_PLP_ID</constant></link></para></listitem>
+		</itemizedlist>
+		</section>
+		<section id="isdbt">
+		<title>ISDB-T delivery system</title>
+		<para>This ISDB-T/ISDB-Tsb API extension should reflect all information
+			needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
+			that some very sophisticated devices won't need certain parameters to
+			tune.</para>
+		<para>The information given here should help application writers to know how
+			to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>
+		<para>The details given here about ISDB-T and ISDB-Tsb are just enough to
+			basically show the dependencies between the needed parameter values,
+			but surely some information is left out. For more detailed information
+			see the following documents:</para>
+		<para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
+			Television Broadcasting" and</para>
+		<para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
+			Television Broadcasting".</para>
+		<para>In order to understand the ISDB specific parameters,
+			one has to have some knowledge the channel structure in
+			ISDB-T and ISDB-Tsb. I.e. it has to be known to
+			the reader that an ISDB-T channel consists of 13 segments,
+			that it can have up to 3 layer sharing those segments,
+			and things like that.</para>
+		<para>The following parameters are valid for ISDB-T:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SUBCHANNEL-ID"><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-IDX"><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-COUNT"><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERA_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERA_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERA_TIME_INTERLEAVING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERB_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERB_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERB_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERB_TIME_INTERLEAVING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERC_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERC_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem>
+		</itemizedlist>
+		</section>
+		<section id="atsc-params">
+			<title>ATSC delivery system</title>
+			<para>The following parameters are valid for ATSC:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			</itemizedlist>
+		</section>
+	</section>
+	<section id="frontend-property-cable-systems">
+	<title>Properties used on cable delivery systems</title>
+	<section id="dvbc-params">
+		<title>DVB-C delivery system</title>
+		<para>The DVB-C Annex-A/C is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The following parameters are valid for DVB-C Annex A/C:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="dvbc-annex-b-params">
+		<title>DVB-C Annex B delivery system</title>
+		<para>The DVB-C Annex-B is only used on a few Countries like the United States.</para>
+		<para>The following parameters are valid for DVB-C Annex B:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	</section>
+	<section id="frontend-property-satellital-systems">
+	<title>Properties used on satellital delivery systems</title>
+	<section id="dvbs-params">
+		<title>DVB-S delivery system</title>
+		<para>The following parameters are valid for DVB-S:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+		</itemizedlist>
+		<para>Future implementations might add those two missing parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="dvbs2-params">
+		<title>DVB-S2 delivery system</title>
+		<para>The following parameters are valid for DVB-S2:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-PILOT"><constant>DTV_PILOT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
+		</itemizedlist>
+		<para>Future implementations might add those two missing parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="isdbs-params">
+		<title>ISDB-S delivery system</title>
+		<para>The following parameters are valid for ISDB-S:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBS-TS-ID"><constant>DTV_ISDBS_TS_ID</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	</section>
+</section>
diff --git a/Documentation/DocBook/media/dvb/dvbstb.pdf b/Documentation/DocBook/media/dvb/dvbstb.pdf
new file mode 100644
index 000000000000..0fa75d90c3eb
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/dvbstb.pdf
diff --git a/Documentation/DocBook/media/dvb/examples.xml b/Documentation/DocBook/media/dvb/examples.xml
new file mode 100644
index 000000000000..f037e568eb6e
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/examples.xml
@@ -0,0 +1,365 @@
+<title>Examples</title>
+<para>In this section we would like to present some examples for using the DVB API.
+</para>
+<para>Maintainer note: This section is out of date. Please refer to the sample programs packaged
+with the driver distribution from <ulink url="http://linuxtv.org/hg/dvb-apps" />.
+</para>
+
+<section id="tuning">
+<title>Tuning</title>
+<para>We will start with a generic tuning subroutine that uses the frontend and SEC, as well as
+the demux devices. The example is given for QPSK tuners, but can easily be adjusted for
+QAM.
+</para>
+<programlisting>
+ #include &#x003C;sys/ioctl.h&#x003E;
+ #include &#x003C;stdio.h&#x003E;
+ #include &#x003C;stdint.h&#x003E;
+ #include &#x003C;sys/types.h&#x003E;
+ #include &#x003C;sys/stat.h&#x003E;
+ #include &#x003C;fcntl.h&#x003E;
+ #include &#x003C;time.h&#x003E;
+ #include &#x003C;unistd.h&#x003E;
+
+ #include &#x003C;linux/dvb/dmx.h&#x003E;
+ #include &#x003C;linux/dvb/frontend.h&#x003E;
+ #include &#x003C;linux/dvb/sec.h&#x003E;
+ #include &#x003C;sys/poll.h&#x003E;
+
+ #define DMX "/dev/dvb/adapter0/demux1"
+ #define FRONT "/dev/dvb/adapter0/frontend1"
+ #define SEC "/dev/dvb/adapter0/sec1"
+
+ /&#x22C6; routine for checking if we have a signal and other status information&#x22C6;/
+ int FEReadStatus(int fd, fe_status_t &#x22C6;stat)
+ {
+	 int ans;
+
+	 if ( (ans = ioctl(fd,FE_READ_STATUS,stat) &#x003C; 0)){
+		 perror("FE READ STATUS: ");
+		 return -1;
+	 }
+
+	 if (&#x22C6;stat &amp; FE_HAS_POWER)
+		 printf("FE HAS POWER\n");
+
+	 if (&#x22C6;stat &amp; FE_HAS_SIGNAL)
+		 printf("FE HAS SIGNAL\n");
+
+	 if (&#x22C6;stat &amp; FE_SPECTRUM_INV)
+		 printf("SPEKTRUM INV\n");
+
+	 return 0;
+ }
+
+
+ /&#x22C6; tune qpsk &#x22C6;/
+ /&#x22C6; freq:             frequency of transponder                      &#x22C6;/
+ /&#x22C6; vpid, apid, tpid: PIDs of video, audio and teletext TS packets  &#x22C6;/
+ /&#x22C6; diseqc:           DiSEqC address of the used LNB                &#x22C6;/
+ /&#x22C6; pol:              Polarisation                                  &#x22C6;/
+ /&#x22C6; srate:            Symbol Rate                                   &#x22C6;/
+ /&#x22C6; fec.              FEC                                           &#x22C6;/
+ /&#x22C6; lnb_lof1:         local frequency of lower LNB band             &#x22C6;/
+ /&#x22C6; lnb_lof2:         local frequency of upper LNB band             &#x22C6;/
+ /&#x22C6; lnb_slof:         switch frequency of LNB                       &#x22C6;/
+
+ int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
+		 int diseqc, int pol, int srate, int fec, int lnb_lof1,
+		 int lnb_lof2, int lnb_slof)
+ {
+	 struct secCommand scmd;
+	 struct secCmdSequence scmds;
+	 struct dmx_pes_filter_params pesFilterParams;
+	 FrontendParameters frp;
+	 struct pollfd pfd[1];
+	 FrontendEvent event;
+	 int demux1, demux2, demux3, front;
+
+	 frequency = (uint32_t) freq;
+	 symbolrate = (uint32_t) srate;
+
+	 if((front = open(FRONT,O_RDWR)) &#x003C; 0){
+		 perror("FRONTEND DEVICE: ");
+		 return -1;
+	 }
+
+	 if((sec = open(SEC,O_RDWR)) &#x003C; 0){
+		 perror("SEC DEVICE: ");
+		 return -1;
+	 }
+
+	 if (demux1 &#x003C; 0){
+		 if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (demux2 &#x003C; 0){
+		 if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (demux3 &#x003C; 0){
+		 if ((demux3=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (freq &#x003C; lnb_slof) {
+		 frp.Frequency = (freq - lnb_lof1);
+		 scmds.continuousTone = SEC_TONE_OFF;
+	 } else {
+		 frp.Frequency = (freq - lnb_lof2);
+		 scmds.continuousTone = SEC_TONE_ON;
+	 }
+	 frp.Inversion = INVERSION_AUTO;
+	 if (pol) scmds.voltage = SEC_VOLTAGE_18;
+	 else scmds.voltage = SEC_VOLTAGE_13;
+
+	 scmd.type=0;
+	 scmd.u.diseqc.addr=0x10;
+	 scmd.u.diseqc.cmd=0x38;
+	 scmd.u.diseqc.numParams=1;
+	 scmd.u.diseqc.params[0] = 0xF0 | ((diseqc &#x22C6; 4) &amp; 0x0F) |
+		 (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
+		 (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
+
+	 scmds.miniCommand=SEC_MINI_NONE;
+	 scmds.numCommands=1;
+	 scmds.commands=&amp;scmd;
+	 if (ioctl(sec, SEC_SEND_SEQUENCE, &amp;scmds) &#x003C; 0){
+		 perror("SEC SEND: ");
+		 return -1;
+	 }
+
+	 if (ioctl(sec, SEC_SEND_SEQUENCE, &amp;scmds) &#x003C; 0){
+		 perror("SEC SEND: ");
+		 return -1;
+	 }
+
+	 frp.u.qpsk.SymbolRate = srate;
+	 frp.u.qpsk.FEC_inner = fec;
+
+	 if (ioctl(front, FE_SET_FRONTEND, &amp;frp) &#x003C; 0){
+		 perror("QPSK TUNE: ");
+		 return -1;
+	 }
+
+	 pfd[0].fd = front;
+	 pfd[0].events = POLLIN;
+
+	 if (poll(pfd,1,3000)){
+		 if (pfd[0].revents &amp; POLLIN){
+			 printf("Getting QPSK event\n");
+			 if ( ioctl(front, FE_GET_EVENT, &amp;event)
+
+			      == -EOVERFLOW){
+				 perror("qpsk get event");
+				 return -1;
+			 }
+			 printf("Received ");
+			 switch(event.type){
+			 case FE_UNEXPECTED_EV:
+				 printf("unexpected event\n");
+				 return -1;
+			 case FE_FAILURE_EV:
+				 printf("failure event\n");
+				 return -1;
+
+			 case FE_COMPLETION_EV:
+				 printf("completion event\n");
+			 }
+		 }
+	 }
+
+
+	 pesFilterParams.pid     = vpid;
+	 pesFilterParams.input   = DMX_IN_FRONTEND;
+	 pesFilterParams.output  = DMX_OUT_DECODER;
+	 pesFilterParams.pes_type = DMX_PES_VIDEO;
+	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
+	 if (ioctl(demux1, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("set_vpid");
+		 return -1;
+	 }
+
+	 pesFilterParams.pid     = apid;
+	 pesFilterParams.input   = DMX_IN_FRONTEND;
+	 pesFilterParams.output  = DMX_OUT_DECODER;
+	 pesFilterParams.pes_type = DMX_PES_AUDIO;
+	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
+	 if (ioctl(demux2, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("set_apid");
+		 return -1;
+	 }
+
+	 pesFilterParams.pid     = tpid;
+	 pesFilterParams.input   = DMX_IN_FRONTEND;
+	 pesFilterParams.output  = DMX_OUT_DECODER;
+	 pesFilterParams.pes_type = DMX_PES_TELETEXT;
+	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
+	 if (ioctl(demux3, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("set_tpid");
+		 return -1;
+	 }
+
+	 return has_signal(fds);
+ }
+
+</programlisting>
+<para>The program assumes that you are using a universal LNB and a standard DiSEqC
+switch with up to 4 addresses. Of course, you could build in some more checking if
+tuning was successful and maybe try to repeat the tuning process. Depending on the
+external hardware, i.e. LNB and DiSEqC switch, and weather conditions this may be
+necessary.
+</para>
+</section>
+
+<section id="the_dvr_device">
+<title>The DVR device</title>
+<para>The following program code shows how to use the DVR device for recording.
+</para>
+<programlisting>
+ #include &#x003C;sys/ioctl.h&#x003E;
+ #include &#x003C;stdio.h&#x003E;
+ #include &#x003C;stdint.h&#x003E;
+ #include &#x003C;sys/types.h&#x003E;
+ #include &#x003C;sys/stat.h&#x003E;
+ #include &#x003C;fcntl.h&#x003E;
+ #include &#x003C;time.h&#x003E;
+ #include &#x003C;unistd.h&#x003E;
+
+ #include &#x003C;linux/dvb/dmx.h&#x003E;
+ #include &#x003C;linux/dvb/video.h&#x003E;
+ #include &#x003C;sys/poll.h&#x003E;
+ #define DVR "/dev/dvb/adapter0/dvr1"
+ #define AUDIO "/dev/dvb/adapter0/audio1"
+ #define VIDEO "/dev/dvb/adapter0/video1"
+
+ #define BUFFY (188&#x22C6;20)
+ #define MAX_LENGTH (1024&#x22C6;1024&#x22C6;5) /&#x22C6; record 5MB &#x22C6;/
+
+
+ /&#x22C6; switch the demuxes to recording, assuming the transponder is tuned &#x22C6;/
+
+ /&#x22C6; demux1, demux2: file descriptor of video and audio filters &#x22C6;/
+ /&#x22C6; vpid, apid:     PIDs of video and audio channels           &#x22C6;/
+
+ int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
+ {
+	 struct dmx_pes_filter_params pesFilterParams;
+
+	 if (demux1 &#x003C; 0){
+		 if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (demux2 &#x003C; 0){
+		 if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 pesFilterParams.pid = vpid;
+	 pesFilterParams.input = DMX_IN_FRONTEND;
+	 pesFilterParams.output = DMX_OUT_TS_TAP;
+	 pesFilterParams.pes_type = DMX_PES_VIDEO;
+	 pesFilterParams.flags = DMX_IMMEDIATE_START;
+	 if (ioctl(demux1, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("DEMUX DEVICE");
+		 return -1;
+	 }
+	 pesFilterParams.pid = apid;
+	 pesFilterParams.input = DMX_IN_FRONTEND;
+	 pesFilterParams.output = DMX_OUT_TS_TAP;
+	 pesFilterParams.pes_type = DMX_PES_AUDIO;
+	 pesFilterParams.flags = DMX_IMMEDIATE_START;
+	 if (ioctl(demux2, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("DEMUX DEVICE");
+		 return -1;
+	 }
+	 return 0;
+ }
+
+ /&#x22C6; start recording MAX_LENGTH , assuming the transponder is tuned &#x22C6;/
+
+ /&#x22C6; demux1, demux2: file descriptor of video and audio filters &#x22C6;/
+ /&#x22C6; vpid, apid:     PIDs of video and audio channels           &#x22C6;/
+ int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
+ {
+	 int i;
+	 int len;
+	 int written;
+	 uint8_t buf[BUFFY];
+	 uint64_t length;
+	 struct pollfd pfd[1];
+	 int dvr, dvr_out;
+
+	 /&#x22C6; open dvr device &#x22C6;/
+	 if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) &#x003C; 0){
+			 perror("DVR DEVICE");
+			 return -1;
+	 }
+
+	 /&#x22C6; switch video and audio demuxes to dvr &#x22C6;/
+	 printf ("Switching dvr on\n");
+	 i = switch_to_record(demux1, demux2, vpid, apid);
+	 printf("finished: ");
+
+	 printf("Recording %2.0f MB of test file in TS format\n",
+		MAX_LENGTH/(1024.0&#x22C6;1024.0));
+	 length = 0;
+
+	 /&#x22C6; open output file &#x22C6;/
+	 if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
+				  |O_TRUNC, S_IRUSR|S_IWUSR
+				  |S_IRGRP|S_IWGRP|S_IROTH|
+				  S_IWOTH)) &#x003C; 0){
+		 perror("Can't open file for dvr test");
+		 return -1;
+	 }
+
+	 pfd[0].fd = dvr;
+	 pfd[0].events = POLLIN;
+
+	 /&#x22C6; poll for dvr data and write to file &#x22C6;/
+	 while (length &#x003C; MAX_LENGTH ) {
+		 if (poll(pfd,1,1)){
+			 if (pfd[0].revents &amp; POLLIN){
+				 len = read(dvr, buf, BUFFY);
+				 if (len &#x003C; 0){
+					 perror("recording");
+					 return -1;
+				 }
+				 if (len &#x003E; 0){
+					 written = 0;
+					 while (written &#x003C; len)
+						 written +=
+							 write (dvr_out,
+								buf, len);
+					 length += len;
+					 printf("written %2.0f MB\r",
+						length/1024./1024.);
+				 }
+			 }
+		 }
+	 }
+	 return 0;
+ }
+
+</programlisting>
+
+</section>
diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml
new file mode 100644
index 000000000000..61407eaba020
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/frontend.xml
@@ -0,0 +1,1515 @@
+<title>DVB Frontend API</title>
+
+<para>The DVB frontend device controls the tuner and DVB demodulator
+hardware. It can be accessed through <emphasis
+role="tt">/dev/dvb/adapter0/frontend0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis
+role="tt">linux/dvb/frontend.h</emphasis> in your application.</para>
+
+<para>DVB frontends come in three varieties: DVB-S (satellite), DVB-C
+(cable) and DVB-T (terrestrial). Transmission via the internet (DVB-IP)
+is not yet handled by this API but a future extension is possible. For
+DVB-S the frontend device also supports satellite equipment control
+(SEC) via DiSEqC and V-SEC protocols. The DiSEqC (digital SEC)
+specification is available from
+<ulink url="http://www.eutelsat.com/satellites/4_5_5.html">Eutelsat</ulink>.</para>
+
+<para>Note that the DVB API may also be used for MPEG decoder-only PCI
+cards, in which case there exists no frontend device.</para>
+
+<section id="frontend_types">
+<title>Frontend Data Types</title>
+
+<section id="fe-type-t">
+<title>Frontend type</title>
+
+<para>For historical reasons, frontend types are named by the type of modulation used in
+transmission. The fontend types are given by fe_type_t type, defined as:</para>
+
+<table pgwide="1" frame="none" id="fe-type">
+<title>Frontend types</title>
+<tgroup cols="3">
+   &cs-def;
+   <thead>
+     <row>
+       <entry>fe_type</entry>
+       <entry>Description</entry>
+       <entry><link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> equivalent type</entry>
+     </row>
+  </thead>
+  <tbody valign="top">
+  <row>
+     <entry id="FE_QPSK"><constant>FE_QPSK</constant></entry>
+     <entry>For DVB-S standard</entry>
+     <entry><constant>SYS_DVBS</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_QAM"><constant>FE_QAM</constant></entry>
+     <entry>For DVB-C annex A/C standard</entry>
+     <entry><constant>SYS_DVBC_ANNEX_AC</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry>
+     <entry>For DVB-T standard</entry>
+     <entry><constant>SYS_DVBT</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_ATSC"><constant>FE_ATSC</constant></entry>
+     <entry>For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used in US.</entry>
+     <entry><constant>SYS_ATSC</constant> (terrestrial) or <constant>SYS_DVBC_ANNEX_B</constant> (cable)</entry>
+  </row>
+</tbody></tgroup></table>
+
+<para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're
+supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter.
+</para>
+</section>
+
+<section id="fe-caps-t">
+<title>frontend capabilities</title>
+
+<para>Capabilities describe what a frontend can do. Some capabilities can only be supported for
+a specific frontend type.</para>
+<programlisting>
+	typedef enum fe_caps {
+	FE_IS_STUPID                  = 0,
+	FE_CAN_INVERSION_AUTO         = 0x1,
+	FE_CAN_FEC_1_2                = 0x2,
+	FE_CAN_FEC_2_3                = 0x4,
+	FE_CAN_FEC_3_4                = 0x8,
+	FE_CAN_FEC_4_5                = 0x10,
+	FE_CAN_FEC_5_6                = 0x20,
+	FE_CAN_FEC_6_7                = 0x40,
+	FE_CAN_FEC_7_8                = 0x80,
+	FE_CAN_FEC_8_9                = 0x100,
+	FE_CAN_FEC_AUTO               = 0x200,
+	FE_CAN_QPSK                   = 0x400,
+	FE_CAN_QAM_16                 = 0x800,
+	FE_CAN_QAM_32                 = 0x1000,
+	FE_CAN_QAM_64                 = 0x2000,
+	FE_CAN_QAM_128                = 0x4000,
+	FE_CAN_QAM_256                = 0x8000,
+	FE_CAN_QAM_AUTO               = 0x10000,
+	FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000,
+	FE_CAN_BANDWIDTH_AUTO         = 0x40000,
+	FE_CAN_GUARD_INTERVAL_AUTO    = 0x80000,
+	FE_CAN_HIERARCHY_AUTO         = 0x100000,
+	FE_CAN_8VSB                   = 0x200000,
+	FE_CAN_16VSB                  = 0x400000,
+	FE_HAS_EXTENDED_CAPS          = 0x800000,
+	FE_CAN_TURBO_FEC              = 0x8000000,
+	FE_CAN_2G_MODULATION          = 0x10000000,
+	FE_NEEDS_BENDING              = 0x20000000,
+	FE_CAN_RECOVER                = 0x40000000,
+	FE_CAN_MUTE_TS                = 0x80000000
+	} fe_caps_t;
+</programlisting>
+</section>
+
+<section id="dvb-frontend-info">
+<title>frontend information</title>
+
+<para>Information about the frontend ca be queried with
+	<link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
+
+<programlisting>
+	struct dvb_frontend_info {
+	char       name[128];
+	fe_type_t  type;
+	uint32_t   frequency_min;
+	uint32_t   frequency_max;
+	uint32_t   frequency_stepsize;
+	uint32_t   frequency_tolerance;
+	uint32_t   symbol_rate_min;
+	uint32_t   symbol_rate_max;
+	uint32_t   symbol_rate_tolerance;     /&#x22C6; ppm &#x22C6;/
+	uint32_t   notifier_delay;            /&#x22C6; ms &#x22C6;/
+	fe_caps_t  caps;
+	};
+</programlisting>
+</section>
+
+<section id="dvb-diseqc-master-cmd">
+<title>diseqc master command</title>
+
+<para>A message sent from the frontend to DiSEqC capable equipment.</para>
+<programlisting>
+	struct dvb_diseqc_master_cmd {
+	uint8_t msg [6]; /&#x22C6;  { framing, address, command, data[3] } &#x22C6;/
+	uint8_t msg_len; /&#x22C6;  valid values are 3...6  &#x22C6;/
+	};
+</programlisting>
+</section>
+<section role="subsection" id="dvb-diseqc-slave-reply">
+<title>diseqc slave reply</title>
+
+<para>A reply to the frontend from DiSEqC 2.0 capable equipment.</para>
+<programlisting>
+	struct dvb_diseqc_slave_reply {
+	uint8_t msg [4]; /&#x22C6;  { framing, data [3] } &#x22C6;/
+	uint8_t msg_len; /&#x22C6;  valid values are 0...4, 0 means no msg  &#x22C6;/
+	int     timeout; /&#x22C6;  return from ioctl after timeout ms with &#x22C6;/
+	};                       /&#x22C6;  errorcode when no message was received  &#x22C6;/
+</programlisting>
+</section>
+
+<section id="fe-sec-voltage-t">
+<title>diseqc slave reply</title>
+<para>The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation
+(horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched
+consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
+<programlisting>
+	typedef enum fe_sec_voltage {
+	SEC_VOLTAGE_13,
+	SEC_VOLTAGE_18
+	} fe_sec_voltage_t;
+</programlisting>
+</section>
+
+<section id="fe-sec-tone-mode-t">
+<title>SEC continuous tone</title>
+
+<para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
+high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to
+be switched consistently to the DiSEqC commands as described in the DiSEqC
+spec.</para>
+<programlisting>
+	typedef enum fe_sec_tone_mode {
+	SEC_TONE_ON,
+	SEC_TONE_OFF
+	} fe_sec_tone_mode_t;
+</programlisting>
+</section>
+
+<section id="fe-sec-mini-cmd-t">
+<title>SEC tone burst</title>
+
+<para>The 22KHz tone burst is usually used with non-DiSEqC capable switches to select
+between two connected LNBs/satellites. When using DiSEqC epuipment this voltage has to
+be switched consistently to the DiSEqC commands as described in the DiSEqC
+spec.</para>
+<programlisting>
+	typedef enum fe_sec_mini_cmd {
+	SEC_MINI_A,
+	SEC_MINI_B
+	} fe_sec_mini_cmd_t;
+</programlisting>
+
+<para></para>
+</section>
+
+<section id="fe-status-t">
+<title>frontend status</title>
+<para>Several functions of the frontend device use the fe_status data type defined
+by</para>
+<programlisting>
+ typedef enum fe_status {
+	 FE_HAS_SIGNAL     = 0x01,   /&#x22C6;  found something above the noise level &#x22C6;/
+	 FE_HAS_CARRIER    = 0x02,   /&#x22C6;  found a DVB signal  &#x22C6;/
+	 FE_HAS_VITERBI    = 0x04,   /&#x22C6;  FEC is stable  &#x22C6;/
+	 FE_HAS_SYNC       = 0x08,   /&#x22C6;  found sync bytes  &#x22C6;/
+	 FE_HAS_LOCK       = 0x10,   /&#x22C6;  everything's working... &#x22C6;/
+	 FE_TIMEDOUT       = 0x20,   /&#x22C6;  no lock within the last ~2 seconds &#x22C6;/
+	 FE_REINIT         = 0x40    /&#x22C6;  frontend was reinitialized,  &#x22C6;/
+ } fe_status_t;                      /&#x22C6;  application is recommned to reset &#x22C6;/
+</programlisting>
+<para>to indicate the current state and/or state changes of the frontend hardware.
+</para>
+
+</section>
+
+<section id="dvb-frontend-parameters">
+<title>frontend parameters</title>
+<para>The kind of parameters passed to the frontend device for tuning depend on
+the kind of hardware you are using.</para>
+<para>The struct <constant>dvb_frontend_parameters</constant> uses an
+union with specific per-system parameters. However, as newer delivery systems
+required more data, the structure size weren't enough to fit, and just
+extending its size would break the existing applications. So, those parameters
+were replaced by the usage of <link linkend="FE_GET_SET_PROPERTY">
+<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> ioctl's. The
+new API is flexible enough to add new parameters to existing delivery systems,
+and to add newer delivery systems.</para>
+<para>So, newer applications should use <link linkend="FE_GET_SET_PROPERTY">
+<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> instead, in
+order to be able to support the newer System Delivery like  DVB-S2, DVB-T2,
+DVB-C2, ISDB, etc.</para>
+<para>All kinds of parameters are combined as an union in the FrontendParameters structure:</para>
+<programlisting>
+struct dvb_frontend_parameters {
+	uint32_t frequency;     /&#x22C6; (absolute) frequency in Hz for QAM/OFDM &#x22C6;/
+				/&#x22C6; intermediate frequency in kHz for QPSK &#x22C6;/
+	fe_spectral_inversion_t inversion;
+	union {
+		struct dvb_qpsk_parameters qpsk;
+		struct dvb_qam_parameters  qam;
+		struct dvb_ofdm_parameters ofdm;
+		struct dvb_vsb_parameters  vsb;
+	} u;
+};
+</programlisting>
+<para>In the case of QPSK frontends the <constant>frequency</constant> field specifies the intermediate
+frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of
+the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and
+OFDM frontends the <constant>frequency</constant> specifies the absolute frequency and is given in Hz.
+</para>
+<section id="dvb-qpsk-parameters">
+<title>QPSK parameters</title>
+<para>For satellite QPSK frontends you have to use the <constant>dvb_qpsk_parameters</constant> structure:</para>
+<programlisting>
+ struct dvb_qpsk_parameters {
+	 uint32_t        symbol_rate;  /&#x22C6; symbol rate in Symbols per second &#x22C6;/
+	 fe_code_rate_t  fec_inner;    /&#x22C6; forward error correction (see above) &#x22C6;/
+ };
+</programlisting>
+</section>
+<section id="dvb-qam-parameters">
+<title>QAM parameters</title>
+<para>for cable QAM frontend you use the <constant>dvb_qam_parameters</constant> structure:</para>
+<programlisting>
+ struct dvb_qam_parameters {
+	 uint32_t         symbol_rate; /&#x22C6; symbol rate in Symbols per second &#x22C6;/
+	 fe_code_rate_t   fec_inner;   /&#x22C6; forward error correction (see above) &#x22C6;/
+	 fe_modulation_t  modulation;  /&#x22C6; modulation type (see above) &#x22C6;/
+ };
+</programlisting>
+</section>
+<section id="dvb-vsb-parameters">
+<title>VSB parameters</title>
+<para>ATSC frontends are supported by the <constant>dvb_vsb_parameters</constant> structure:</para>
+<programlisting>
+struct dvb_vsb_parameters {
+	fe_modulation_t modulation;	/&#x22C6; modulation type (see above) &#x22C6;/
+};
+</programlisting>
+</section>
+<section id="dvb-ofdm-parameters">
+<title>OFDM parameters</title>
+<para>DVB-T frontends are supported by the <constant>dvb_ofdm_parameters</constant> structure:</para>
+<programlisting>
+ struct dvb_ofdm_parameters {
+	 fe_bandwidth_t      bandwidth;
+	 fe_code_rate_t      code_rate_HP;  /&#x22C6; high priority stream code rate &#x22C6;/
+	 fe_code_rate_t      code_rate_LP;  /&#x22C6; low priority stream code rate &#x22C6;/
+	 fe_modulation_t     constellation; /&#x22C6; modulation type (see above) &#x22C6;/
+	 fe_transmit_mode_t  transmission_mode;
+	 fe_guard_interval_t guard_interval;
+	 fe_hierarchy_t      hierarchy_information;
+ };
+</programlisting>
+</section>
+<section id="fe-spectral-inversion-t">
+<title>frontend spectral inversion</title>
+<para>The Inversion field can take one of these values:
+</para>
+<programlisting>
+typedef enum fe_spectral_inversion {
+	INVERSION_OFF,
+	INVERSION_ON,
+	INVERSION_AUTO
+} fe_spectral_inversion_t;
+</programlisting>
+<para>It indicates if spectral inversion should be presumed or not. In the automatic setting
+(<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
+itself.
+</para>
+</section>
+<section id="fe-code-rate-t">
+<title>frontend code rate</title>
+<para>The possible values for the <constant>fec_inner</constant> field used on
+<link refend="dvb-qpsk-parameters"><constant>struct dvb_qpsk_parameters</constant></link> and
+<link refend="dvb-qam-parameters"><constant>struct dvb_qam_parameters</constant></link> are:
+</para>
+<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+</programlisting>
+<para>which correspond to error correction rates of 1/2, 2/3, etc., no error correction or auto
+detection.
+</para>
+</section>
+<section id="fe-modulation-t">
+<title>frontend modulation type for QAM, OFDM and VSB</title>
+<para>For cable and terrestrial frontends, e. g. for
+<link refend="dvb-qam-parameters"><constant>struct dvb_qpsk_parameters</constant></link>,
+<link refend="dvb-ofdm-parameters"><constant>struct dvb_qam_parameters</constant></link> and
+<link refend="dvb-vsb-parameters"><constant>struct dvb_qam_parameters</constant></link>,
+it needs to specify the quadrature modulation mode which can be one of the following:
+</para>
+<programlisting>
+ typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
+ } fe_modulation_t;
+</programlisting>
+</section>
+<para>Finally, there are several more parameters for OFDM:
+</para>
+<section id="fe-transmit-mode-t">
+<title>Number of carriers per channel</title>
+<programlisting>
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+ } fe_transmit_mode_t;
+</programlisting>
+</section>
+<section id="fe-bandwidth-t">
+<title>frontend bandwidth</title>
+<programlisting>
+typedef enum fe_bandwidth {
+	BANDWIDTH_8_MHZ,
+	BANDWIDTH_7_MHZ,
+	BANDWIDTH_6_MHZ,
+	BANDWIDTH_AUTO,
+	BANDWIDTH_5_MHZ,
+	BANDWIDTH_10_MHZ,
+	BANDWIDTH_1_712_MHZ,
+} fe_bandwidth_t;
+</programlisting>
+</section>
+<section id="fe-guard-interval-t">
+<title>frontend guard inverval</title>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
+</programlisting>
+</section>
+<section id="fe-hierarchy-t">
+<title>frontend hierarchy</title>
+<programlisting>
+typedef enum fe_hierarchy {
+	 HIERARCHY_NONE,
+	 HIERARCHY_1,
+	 HIERARCHY_2,
+	 HIERARCHY_4,
+	 HIERARCHY_AUTO
+ } fe_hierarchy_t;
+</programlisting>
+</section>
+
+</section>
+
+<section id="dvb-frontend-event">
+<title>frontend events</title>
+ <programlisting>
+ struct dvb_frontend_event {
+	 fe_status_t status;
+	 struct dvb_frontend_parameters parameters;
+ };
+</programlisting>
+ </section>
+</section>
+
+
+<section id="frontend_fcalls">
+<title>Frontend Function Calls</title>
+
+<section id="frontend_f_open">
+<title>open()</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>This system call opens a named frontend device (/dev/dvb/adapter0/frontend0)
+ for subsequent use. Usually the first thing to do after a successful open is to
+ find out the frontend type with <link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
+<para>The device can be opened in read-only mode, which only allows monitoring of
+ device status and statistics, or read/write mode, which allows any kind of use
+ (e.g. performing tuning operations.)
+</para>
+<para>In a system with multiple front-ends, it is usually the case that multiple devices
+ cannot be open in read/write mode simultaneously. As long as a front-end
+ device is opened in read/write mode, other open() calls in read/write mode will
+ either fail or block, depending on whether non-blocking or blocking mode was
+ specified. A front-end device opened in blocking mode can later be put into
+ non-blocking mode (and vice versa) using the F_SETFL command of the fcntl
+ system call. This is a standard system call, documented in the Linux manual
+ page for fcntl. When an open() call has succeeded, the device will be ready
+ for use in the specified mode. This implies that the corresponding hardware is
+ powered up, and that other front-ends may have been powered down to make
+ that possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_f_close">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened front-end device. After closing
+ a front-end device, its corresponding hardware might be powered down
+ automatically.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_READ_STATUS">
+<title>FE_READ_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns status information about the front-end. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_STATUS">FE_READ_STATUS</link>,
+ fe_status_t &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_STATUS">FE_READ_STATUS</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct fe_status_t
+ *status</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end status word is
+ to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>status points to invalid address.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_READ_BER">
+<title>FE_READ_BER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the bit error rate for the signal currently
+ received/demodulated by the front-end. For this command, read-only access to
+ the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_BER">FE_READ_BER</link>,
+ uint32_t &#x22C6;ber);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_BER">FE_READ_BER</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>uint32_t *ber</para>
+</entry><entry
+ align="char">
+<para>The bit error rate is stored into *ber.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_READ_SNR">
+<title>FE_READ_SNR</title>
+
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the signal-to-noise ratio for the signal currently received
+ by the front-end. For this command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, int16_t
+ &#x22C6;snr);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_SNR">FE_READ_SNR</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int16_t *snr</para>
+</entry><entry
+ align="char">
+<para>The signal-to-noise ratio is stored into *snr.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_READ_SIGNAL_STRENGTH">
+<title>FE_READ_SIGNAL_STRENGTH</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the signal strength value for the signal currently received
+ by the front-end. For this command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, int16_t &#x22C6;strength);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int16_t *strength</para>
+</entry><entry
+ align="char">
+<para>The signal strength value is stored into *strength.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_READ_UNCORRECTED_BLOCKS">
+<title>FE_READ_UNCORRECTED_BLOCKS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the number of uncorrected blocks detected by the device
+ driver during its lifetime. For meaningful measurements, the increment in block
+ count during a specific time interval should be calculated. For this command,
+ read-only access to the device is sufficient.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Note that the counter will wrap to zero after its maximum count has been
+ reached.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link>, uint32_t &#x22C6;ublocks);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>uint32_t *ublocks</para>
+</entry><entry
+ align="char">
+<para>The total number of uncorrected blocks seen by the driver
+ so far.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_FRONTEND">
+<title>FE_SET_FRONTEND</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call starts a tuning operation using specified parameters. The result
+ of this call will be successful if the parameters were valid and the tuning could
+ be initiated. The result of the tuning operation in itself, however, will arrive
+ asynchronously as an event (see documentation for <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> and
+ FrontendEvent.) If a new <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> operation is initiated before
+ the previous one was completed, the previous operation will be aborted in favor
+ of the new one. This command requires read/write access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>,
+ struct dvb_frontend_parameters &#x22C6;p);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_parameters
+ *p</para>
+</entry><entry
+ align="char">
+<para>Points to parameters for tuning operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Maximum supported symbol rate reached.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_GET_FRONTEND">
+<title>FE_GET_FRONTEND</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call queries the currently effective frontend parameters. For this
+ command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>,
+ struct dvb_frontend_parameters &#x22C6;p);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_parameters
+ *p</para>
+</entry><entry
+ align="char">
+<para>Points to parameters for tuning operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Maximum supported symbol rate reached.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+
+<section id="FE_GET_EVENT">
+<title>FE_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns a frontend event if available. If an event is not
+ available, the behavior depends on whether the device is in blocking or
+ non-blocking mode. In the latter case, the call fails immediately with errno
+ set to EWOULDBLOCK. In the former case, the call blocks until an event
+ becomes available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The standard Linux poll() and/or select() system calls can be used with the
+ device file descriptor to watch for new events. For select(), the file descriptor
+ should be included in the exceptfds argument, and for poll(), POLLPRI should
+ be specified as the wake-up condition. Since the event queue allocated is
+ rather small (room for 8 events), the queue must be serviced regularly to avoid
+ overflow. If an overflow happens, the oldest event is discarded from the queue,
+ and an error (EOVERFLOW) occurs the next time the queue is read. After
+ reporting the error condition in this fashion, subsequent
+ <link linkend="FE_GET_EVENT">FE_GET_EVENT</link>
+ calls will return events from the queue as usual.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>For the sake of implementation simplicity, this command requires read/write
+ access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = QPSK_GET_EVENT,
+ struct dvb_frontend_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_event
+ *ev</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the event,</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>if any, is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+<para>Overflow in event queue - one or more events were lost.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_GET_INFO">
+<title>FE_GET_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns information about the front-end. This call only requires
+ read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(int fd, int request = <link linkend="FE_GET_INFO">FE_GET_INFO</link>, struct
+ dvb_frontend_info &#x22C6;info);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_INFO">FE_GET_INFO</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_info
+ *info</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end information is
+ to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_RESET_OVERLOAD">
+<title>FE_DISEQC_RESET_OVERLOAD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>If the bus has been automatically powered off due to power overload, this ioctl
+ call restores the power to the bus. The call requires read/write access to the
+ device. This call has no effect if the device is manually powered off. Not all
+ DVB adapters support this ioctl.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link>);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link> for this
+ command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_SEND_MASTER_CMD">
+<title>FE_DISEQC_SEND_MASTER_CMD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to send a a DiSEqC command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link>, struct
+ dvb_diseqc_master_cmd &#x22C6;cmd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_diseqc_master_cmd
+ *cmd</para>
+</entry><entry
+ align="char">
+<para>Pointer to the command to be transmitted.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_RECV_SLAVE_REPLY">
+<title>FE_DISEQC_RECV_SLAVE_REPLY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to receive reply to a DiSEqC 2.0 command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link>, struct
+ dvb_diseqc_slave_reply &#x22C6;reply);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_diseqc_slave_reply
+ *reply</para>
+</entry><entry
+ align="char">
+<para>Pointer to the command to be received.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_SEND_BURST">
+<title>FE_DISEQC_SEND_BURST</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to send a 22KHz tone burst.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link>, fe_sec_mini_cmd_t burst);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_mini_cmd_t
+ burst</para>
+</entry><entry
+ align="char">
+<para>burst A or B.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_TONE">
+<title>FE_SET_TONE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This call is used to set the generation of the continuous 22kHz tone. This call
+ requires read/write permissions.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_TONE">FE_SET_TONE</link>,
+ fe_sec_tone_mode_t tone);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_TONE">FE_SET_TONE</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_tone_mode_t
+ tone</para>
+</entry><entry
+ align="char">
+<para>The requested tone generation mode (on/off).</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_VOLTAGE">
+<title>FE_SET_VOLTAGE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This call is used to set the bus voltage. This call requires read/write
+ permissions.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link>,
+ fe_sec_voltage_t voltage);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_voltage_t
+ voltage</para>
+</entry><entry
+ align="char">
+<para>The requested bus voltage.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_ENABLE_HIGH_LNB_VOLTAGE">
+<title>FE_ENABLE_HIGH_LNB_VOLTAGE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>If high != 0 enables slightly higher voltages instead of 13/18V (to compensate
+ for long cables). This call requires read/write permissions. Not all DVB
+ adapters support this ioctl.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link>, int high);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int high</para>
+</entry><entry
+ align="char">
+<para>The requested bus voltage.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_FRONTEND_TUNE_MODE">
+<title>FE_SET_FRONTEND_TUNE_MODE</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>Allow setting tuner mode flags to the frontend.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+<link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link>, unsigned int flags);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+	<para>unsigned int flags</para>
+</entry>
+<entry align="char">
+<para>
+FE_TUNE_MODE_ONESHOT When set, this flag will disable any zigzagging or other "normal" tuning behaviour. Additionally, there will be no automatic monitoring of the lock status, and hence no frontend events will be generated. If a frontend device is closed, this flag will be automatically turned off when the device is reopened read-write.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_DISHNETWORK_SEND_LEGACY_CMD">
+	<title>FE_DISHNETWORK_SEND_LEGACY_CMD</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>WARNING: This is a very obscure legacy command, used only at stv0299 driver. Should not be used on newer drivers.</para>
+<para>It provides a non-standard method for selecting Diseqc voltage on the frontend, for Dish Network legacy switches.</para>
+<para>As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+	<link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link>, unsigned long cmd);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+	<para>unsigned long cmd</para>
+</entry>
+<entry align="char">
+<para>
+sends the specified raw cmd to the dish via DISEqC.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+</section>
+
+&sub-dvbproperty;
diff --git a/Documentation/DocBook/media/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml
new file mode 100644
index 000000000000..c75dc7cc3e9b
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/intro.xml
@@ -0,0 +1,212 @@
+<title>Introduction</title>
+
+<section id="requisites">
+<title>What you need to know</title>
+
+<para>The reader of this document is required to have some knowledge in
+the area of digital video broadcasting (DVB) and should be familiar with
+part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e
+you should know what a program/transport stream (PS/TS) is and what is
+meant by a packetized elementary stream (PES) or an I-frame.</para>
+
+<para>Various DVB standards documents are available from
+<ulink url="http://www.dvb.org" /> and/or
+<ulink url="http://www.etsi.org" />.</para>
+
+<para>It is also necessary to know how to access unix/linux devices and
+how to use ioctl calls. This also includes the knowledge of C or C++.
+</para>
+</section>
+
+<section id="history">
+<title>History</title>
+
+<para>The first API for DVB cards we used at Convergence in late 1999
+was an extension of the Video4Linux API which was primarily developed
+for frame grabber cards. As such it was not really well suited to be
+used for DVB cards and their new features like recording MPEG streams
+and filtering several section and PES data streams at the same time.
+</para>
+
+<para>In early 2000, we were approached by Nokia with a proposal for a
+new standard Linux DVB API. As a commitment to the development of
+terminals based on open standards, Nokia and Convergence made it
+available to all Linux developers and published it on
+<ulink url="http://www.linuxtv.org/" /> in September 2000.
+Convergence is the maintainer of the Linux DVB API. Together with the
+LinuxTV community (i.e. you, the reader of this document), the Linux DVB
+API will be constantly reviewed and improved. With the Linux driver for
+the Siemens/Hauppauge DVB PCI card Convergence provides a first
+implementation of the Linux DVB API.</para>
+</section>
+
+<section id="overview">
+<title>Overview</title>
+
+<figure id="stb_components">
+<title>Components of a DVB card/STB</title>
+<mediaobject>
+<imageobject>
+<imagedata fileref="dvbstb.pdf" format="PS" />
+</imageobject>
+<imageobject>
+<imagedata fileref="dvbstb.png" format="PNG" />
+</imageobject>
+</mediaobject>
+</figure>
+
+<para>A DVB PCI card or DVB set-top-box (STB) usually consists of the
+following main hardware components: </para>
+
+<itemizedlist>
+ <listitem>
+
+<para>Frontend consisting of tuner and DVB demodulator</para>
+
+<para>Here the raw signal reaches the DVB hardware from a satellite dish
+or antenna or directly from cable. The frontend down-converts and
+demodulates this signal into an MPEG transport stream (TS). In case of a
+satellite frontend, this includes a facility for satellite equipment
+control (SEC), which allows control of LNB polarization, multi feed
+switches or dish rotors.</para>
+
+</listitem>
+ <listitem>
+
+<para>Conditional Access (CA) hardware like CI adapters and smartcard slots
+</para>
+
+<para>The complete TS is passed through the CA hardware. Programs to
+which the user has access (controlled by the smart card) are decoded in
+real time and re-inserted into the TS.</para>
+
+</listitem>
+ <listitem>
+ <para>Demultiplexer which filters the incoming DVB stream</para>
+
+<para>The demultiplexer splits the TS into its components like audio and
+video streams. Besides usually several of such audio and video streams
+it also contains data streams with information about the programs
+offered in this or other streams of the same provider.</para>
+
+</listitem>
+<listitem>
+
+<para>MPEG2 audio and video decoder</para>
+
+<para>The main targets of the demultiplexer are the MPEG2 audio and
+video decoders. After decoding they pass on the uncompressed audio and
+video to the computer screen or (through a PAL/NTSC encoder) to a TV
+set.</para>
+
+
+</listitem>
+</itemizedlist>
+
+<para><xref linkend="stb_components" /> shows a crude schematic of the control and data flow
+between those components.</para>
+
+<para>On a DVB PCI card not all of these have to be present since some
+functionality can be provided by the main CPU of the PC (e.g. MPEG
+picture and sound decoding) or is not needed (e.g. for data-only uses
+like &#8220;internet over satellite&#8221;). Also not every card or STB
+provides conditional access hardware.</para>
+
+</section>
+
+<section id="dvb_devices">
+<title>Linux DVB Devices</title>
+
+<para>The Linux DVB API lets you control these hardware components
+through currently six Unix-style character devices for video, audio,
+frontend, demux, CA and IP-over-DVB networking. The video and audio
+devices control the MPEG2 decoder hardware, the frontend device the
+tuner and the DVB demodulator. The demux device gives you control over
+the PES and section filters of the hardware. If the hardware does not
+support filtering these filters can be implemented in software. Finally,
+the CA device controls all the conditional access capabilities of the
+hardware. It can depend on the individual security requirements of the
+platform, if and how many of the CA functions are made available to the
+application through this device.</para>
+
+<para>All devices can be found in the <emphasis role="tt">/dev</emphasis>
+tree under <emphasis role="tt">/dev/dvb</emphasis>. The individual devices
+are called:</para>
+
+<itemizedlist>
+<listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/audioM</emphasis>,</para>
+</listitem>
+<listitem>
+<para><emphasis role="tt">/dev/dvb/adapterN/videoM</emphasis>,</para>
+</listitem>
+<listitem>
+<para><emphasis role="tt">/dev/dvb/adapterN/frontendM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/netM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/demuxM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/dvrM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/caM</emphasis>,</para></listitem></itemizedlist>
+
+<para>where N enumerates the DVB PCI cards in a system starting
+from&#x00A0;0, and M enumerates the devices of each type within each
+adapter, starting from&#x00A0;0, too. We will omit the &#8220;<emphasis
+role="tt">/dev/dvb/adapterN/</emphasis>&#8221; in the further dicussion
+of these devices. The naming scheme for the devices is the same wheter
+devfs is used or not.</para>
+
+<para>More details about the data structures and function calls of all
+the devices are described in the following chapters.</para>
+
+</section>
+
+<section id="include_files">
+<title>API include files</title>
+
+<para>For each of the DVB devices a corresponding include file exists.
+The DVB API include files should be included in application sources with
+a partial path like:</para>
+
+<programlisting>
+	#include &#x003C;linux/dvb/audio.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/ca.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/dmx.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/frontend.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/net.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/osd.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/video.h&#x003E;
+</programlisting>
+
+<para>To enable applications to support different API version, an
+additional include file <emphasis
+role="tt">linux/dvb/version.h</emphasis> exists, which defines the
+constant <emphasis role="tt">DVB_API_VERSION</emphasis>. This document
+describes <emphasis role="tt">DVB_API_VERSION&#x00A0;3</emphasis>.
+</para>
+
+</section>
+
diff --git a/Documentation/DocBook/media/dvb/kdapi.xml b/Documentation/DocBook/media/dvb/kdapi.xml
new file mode 100644
index 000000000000..6c67481eaa4b
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/kdapi.xml
@@ -0,0 +1,2309 @@
+<title>Kernel Demux API</title>
+<para>The kernel demux API defines a driver-internal interface for registering low-level,
+hardware specific driver to a hardware independent demux layer. It is only of interest for
+DVB device driver writers. The header file for this API is named <emphasis role="tt">demux.h</emphasis> and located in
+<emphasis role="tt">drivers/media/dvb/dvb-core</emphasis>.
+</para>
+<para>Maintainer note: This section must be reviewed. It is probably out of date.
+</para>
+
+<section id="kernel_demux_data_types">
+<title>Kernel Demux Data Types</title>
+
+
+<section id="dmx_success_t">
+<title>dmx_success_t</title>
+ <programlisting>
+ typedef enum {
+   DMX_OK = 0, /&#x22C6; Received Ok &#x22C6;/
+   DMX_LENGTH_ERROR, /&#x22C6; Incorrect length &#x22C6;/
+   DMX_OVERRUN_ERROR, /&#x22C6; Receiver ring buffer overrun &#x22C6;/
+   DMX_CRC_ERROR, /&#x22C6; Incorrect CRC &#x22C6;/
+   DMX_FRAME_ERROR, /&#x22C6; Frame alignment error &#x22C6;/
+   DMX_FIFO_ERROR, /&#x22C6; Receiver FIFO overrun &#x22C6;/
+   DMX_MISSED_ERROR /&#x22C6; Receiver missed packet &#x22C6;/
+ } dmx_success_t;
+</programlisting>
+
+</section>
+<section id="ts_filter_types">
+<title>TS filter types</title>
+ <programlisting>
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; TS packet reception &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ /&#x22C6; TS filter type for set_type() &#x22C6;/
+
+ #define TS_PACKET       1   /&#x22C6; send TS packets (188 bytes) to callback (default) &#x22C6;/
+ #define TS_PAYLOAD_ONLY 2   /&#x22C6; in case TS_PACKET is set, only send the TS
+				payload (&#x003C;=184 bytes per packet) to callback &#x22C6;/
+ #define TS_DECODER      4   /&#x22C6; send stream to built-in decoder (if present) &#x22C6;/
+</programlisting>
+
+</section>
+<section id="dmx_ts_pes_t">
+<title>dmx_ts_pes_t</title>
+<para>The structure
+</para>
+<programlisting>
+ typedef enum
+ {
+	 DMX_TS_PES_AUDIO,   /&#x22C6; also send packets to audio decoder (if it exists) &#x22C6;/
+	 DMX_TS_PES_VIDEO,   /&#x22C6; ... &#x22C6;/
+	 DMX_TS_PES_TELETEXT,
+	 DMX_TS_PES_SUBTITLE,
+	 DMX_TS_PES_PCR,
+	 DMX_TS_PES_OTHER,
+ } dmx_ts_pes_t;
+</programlisting>
+<para>describes the PES type for filters which write to a built-in decoder. The correspond (and
+should be kept identical) to the types in the demux device.
+</para>
+<programlisting>
+ struct dmx_ts_feed_s {
+	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
+	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int (&#x22C6;set) (struct dmx_ts_feed_s&#x22C6; feed,
+		     __u16 pid,
+		     size_t callback_length,
+		     size_t circular_buffer_size,
+		     int descramble,
+		     struct timespec timeout);
+	 int (&#x22C6;start_filtering) (struct dmx_ts_feed_s&#x22C6; feed);
+	 int (&#x22C6;stop_filtering) (struct dmx_ts_feed_s&#x22C6; feed);
+	 int (&#x22C6;set_type) (struct dmx_ts_feed_s&#x22C6; feed,
+			  int type,
+			  dmx_ts_pes_t pes_type);
+ };
+
+ typedef struct dmx_ts_feed_s dmx_ts_feed_t;
+</programlisting>
+ <programlisting>
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; PES packet reception (not supported yet) &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ typedef struct dmx_pes_filter_s {
+	 struct dmx_pes_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+ } dmx_pes_filter_t;
+</programlisting>
+ <programlisting>
+ typedef struct dmx_pes_feed_s {
+	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
+	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int (&#x22C6;set) (struct dmx_pes_feed_s&#x22C6; feed,
+		     __u16 pid,
+		     size_t circular_buffer_size,
+		     int descramble,
+		     struct timespec timeout);
+	 int (&#x22C6;start_filtering) (struct dmx_pes_feed_s&#x22C6; feed);
+	 int (&#x22C6;stop_filtering) (struct dmx_pes_feed_s&#x22C6; feed);
+	 int (&#x22C6;allocate_filter) (struct dmx_pes_feed_s&#x22C6; feed,
+				 dmx_pes_filter_t&#x22C6;&#x22C6; filter);
+	 int (&#x22C6;release_filter) (struct dmx_pes_feed_s&#x22C6; feed,
+				dmx_pes_filter_t&#x22C6; filter);
+ } dmx_pes_feed_t;
+</programlisting>
+ <programlisting>
+ typedef struct {
+	 __u8 filter_value [DMX_MAX_FILTER_SIZE];
+	 __u8 filter_mask [DMX_MAX_FILTER_SIZE];
+	 struct dmx_section_feed_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+ } dmx_section_filter_t;
+</programlisting>
+ <programlisting>
+ struct dmx_section_feed_s {
+	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
+	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int (&#x22C6;set) (struct dmx_section_feed_s&#x22C6; feed,
+		     __u16 pid,
+		     size_t circular_buffer_size,
+		     int descramble,
+		     int check_crc);
+	 int (&#x22C6;allocate_filter) (struct dmx_section_feed_s&#x22C6; feed,
+				 dmx_section_filter_t&#x22C6;&#x22C6; filter);
+	 int (&#x22C6;release_filter) (struct dmx_section_feed_s&#x22C6; feed,
+				dmx_section_filter_t&#x22C6; filter);
+	 int (&#x22C6;start_filtering) (struct dmx_section_feed_s&#x22C6; feed);
+	 int (&#x22C6;stop_filtering) (struct dmx_section_feed_s&#x22C6; feed);
+ };
+ typedef struct dmx_section_feed_s dmx_section_feed_t;
+
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; Callback functions &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ typedef int (&#x22C6;dmx_ts_cb) ( __u8 &#x22C6; buffer1,
+			    size_t buffer1_length,
+			    __u8 &#x22C6; buffer2,
+			    size_t buffer2_length,
+			    dmx_ts_feed_t&#x22C6; source,
+			    dmx_success_t success);
+
+ typedef int (&#x22C6;dmx_section_cb) ( __u8 &#x22C6; buffer1,
+				 size_t buffer1_len,
+				 __u8 &#x22C6; buffer2,
+				 size_t buffer2_len,
+				 dmx_section_filter_t &#x22C6; source,
+				 dmx_success_t success);
+
+ typedef int (&#x22C6;dmx_pes_cb) ( __u8 &#x22C6; buffer1,
+			     size_t buffer1_len,
+			     __u8 &#x22C6; buffer2,
+			     size_t buffer2_len,
+			     dmx_pes_filter_t&#x22C6; source,
+			     dmx_success_t success);
+
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; DVB Front-End &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ typedef enum {
+	 DMX_OTHER_FE = 0,
+	 DMX_SATELLITE_FE,
+	 DMX_CABLE_FE,
+	 DMX_TERRESTRIAL_FE,
+	 DMX_LVDS_FE,
+	 DMX_ASI_FE, /&#x22C6; DVB-ASI interface &#x22C6;/
+	 DMX_MEMORY_FE
+ } dmx_frontend_source_t;
+
+ typedef struct {
+	 /&#x22C6; The following char&#x22C6; fields point to NULL terminated strings &#x22C6;/
+	 char&#x22C6; id;                    /&#x22C6; Unique front-end identifier &#x22C6;/
+	 char&#x22C6; vendor;                /&#x22C6; Name of the front-end vendor &#x22C6;/
+	 char&#x22C6; model;                 /&#x22C6; Name of the front-end model &#x22C6;/
+	 struct list_head connectivity_list; /&#x22C6; List of front-ends that can
+						be connected to a particular
+						demux &#x22C6;/
+	 void&#x22C6; priv;     /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 dmx_frontend_source_t source;
+ } dmx_frontend_t;
+
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; MPEG-2 TS Demux &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ /&#x22C6;
+  &#x22C6; Flags OR'ed in the capabilites field of struct dmx_demux_s.
+  &#x22C6;/
+
+ #define DMX_TS_FILTERING                        1
+ #define DMX_PES_FILTERING                       2
+ #define DMX_SECTION_FILTERING                   4
+ #define DMX_MEMORY_BASED_FILTERING              8    /&#x22C6; write() available &#x22C6;/
+ #define DMX_CRC_CHECKING                        16
+ #define DMX_TS_DESCRAMBLING                     32
+ #define DMX_SECTION_PAYLOAD_DESCRAMBLING        64
+ #define DMX_MAC_ADDRESS_DESCRAMBLING            128
+</programlisting>
+
+</section>
+<section id="demux_demux_t">
+<title>demux_demux_t</title>
+ <programlisting>
+ /&#x22C6;
+  &#x22C6; DMX_FE_ENTRY(): Casts elements in the list of registered
+  &#x22C6; front-ends from the generic type struct list_head
+  &#x22C6; to the type &#x22C6; dmx_frontend_t
+  &#x22C6;.
+ &#x22C6;/
+
+ #define DMX_FE_ENTRY(list) list_entry(list, dmx_frontend_t, connectivity_list)
+
+ struct dmx_demux_s {
+	 /&#x22C6; The following char&#x22C6; fields point to NULL terminated strings &#x22C6;/
+	 char&#x22C6; id;                    /&#x22C6; Unique demux identifier &#x22C6;/
+	 char&#x22C6; vendor;                /&#x22C6; Name of the demux vendor &#x22C6;/
+	 char&#x22C6; model;                 /&#x22C6; Name of the demux model &#x22C6;/
+	 __u32 capabilities;          /&#x22C6; Bitfield of capability flags &#x22C6;/
+	 dmx_frontend_t&#x22C6; frontend;    /&#x22C6; Front-end connected to the demux &#x22C6;/
+	 struct list_head reg_list;   /&#x22C6; List of registered demuxes &#x22C6;/
+	 void&#x22C6; priv;                  /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int users;                   /&#x22C6; Number of users &#x22C6;/
+	 int (&#x22C6;open) (struct dmx_demux_s&#x22C6; demux);
+	 int (&#x22C6;close) (struct dmx_demux_s&#x22C6; demux);
+	 int (&#x22C6;write) (struct dmx_demux_s&#x22C6; demux, const char&#x22C6; buf, size_t count);
+	 int (&#x22C6;allocate_ts_feed) (struct dmx_demux_s&#x22C6; demux,
+				  dmx_ts_feed_t&#x22C6;&#x22C6; feed,
+				  dmx_ts_cb callback);
+	 int (&#x22C6;release_ts_feed) (struct dmx_demux_s&#x22C6; demux,
+				 dmx_ts_feed_t&#x22C6; feed);
+	 int (&#x22C6;allocate_pes_feed) (struct dmx_demux_s&#x22C6; demux,
+				   dmx_pes_feed_t&#x22C6;&#x22C6; feed,
+				   dmx_pes_cb callback);
+	 int (&#x22C6;release_pes_feed) (struct dmx_demux_s&#x22C6; demux,
+				  dmx_pes_feed_t&#x22C6; feed);
+	 int (&#x22C6;allocate_section_feed) (struct dmx_demux_s&#x22C6; demux,
+				       dmx_section_feed_t&#x22C6;&#x22C6; feed,
+				       dmx_section_cb callback);
+	 int (&#x22C6;release_section_feed) (struct dmx_demux_s&#x22C6; demux,
+				      dmx_section_feed_t&#x22C6; feed);
+	 int (&#x22C6;descramble_mac_address) (struct dmx_demux_s&#x22C6; demux,
+					__u8&#x22C6; buffer1,
+					size_t buffer1_length,
+					__u8&#x22C6; buffer2,
+					size_t buffer2_length,
+					__u16 pid);
+	 int (&#x22C6;descramble_section_payload) (struct dmx_demux_s&#x22C6; demux,
+					    __u8&#x22C6; buffer1,
+					    size_t buffer1_length,
+					    __u8&#x22C6; buffer2, size_t buffer2_length,
+					    __u16 pid);
+	 int (&#x22C6;add_frontend) (struct dmx_demux_s&#x22C6; demux,
+			      dmx_frontend_t&#x22C6; frontend);
+	 int (&#x22C6;remove_frontend) (struct dmx_demux_s&#x22C6; demux,
+				 dmx_frontend_t&#x22C6; frontend);
+	 struct list_head&#x22C6; (&#x22C6;get_frontends) (struct dmx_demux_s&#x22C6; demux);
+	 int (&#x22C6;connect_frontend) (struct dmx_demux_s&#x22C6; demux,
+				  dmx_frontend_t&#x22C6; frontend);
+	 int (&#x22C6;disconnect_frontend) (struct dmx_demux_s&#x22C6; demux);
+
+
+	 /&#x22C6; added because js cannot keep track of these himself &#x22C6;/
+	 int (&#x22C6;get_pes_pids) (struct dmx_demux_s&#x22C6; demux, __u16 &#x22C6;pids);
+ };
+ typedef struct dmx_demux_s dmx_demux_t;
+</programlisting>
+
+</section>
+<section id="demux_directory">
+<title>Demux directory</title>
+ <programlisting>
+ /&#x22C6;
+  &#x22C6; DMX_DIR_ENTRY(): Casts elements in the list of registered
+  &#x22C6; demuxes from the generic type struct list_head&#x22C6; to the type dmx_demux_t
+  &#x22C6;.
+  &#x22C6;/
+
+ #define DMX_DIR_ENTRY(list) list_entry(list, dmx_demux_t, reg_list)
+
+ int dmx_register_demux (dmx_demux_t&#x22C6; demux);
+ int dmx_unregister_demux (dmx_demux_t&#x22C6; demux);
+ struct list_head&#x22C6; dmx_get_demuxes (void);
+</programlisting>
+ </section></section>
+<section id="demux_directory_api">
+<title>Demux Directory API</title>
+<para>The demux directory is a Linux kernel-wide facility for registering and accessing the
+MPEG-2 TS demuxes in the system. Run-time registering and unregistering of demux drivers
+is possible using this API.
+</para>
+<para>All demux drivers in the directory implement the abstract interface dmx_demux_t.
+</para>
+
+<section
+role="subsection"><title>dmx_register_demux()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function makes a demux driver interface available to the Linux kernel. It is
+ usually called by the init_module() function of the kernel module that contains
+ the demux driver. The caller of this function is responsible for allocating
+ dynamic or static memory for the demux structure and for initializing its fields
+ before calling this function. The memory allocated for the demux structure
+ must not be freed before calling dmx_unregister_demux(),</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_register_demux ( dmx_demux_t &#x22C6;demux )</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux structure.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EEXIST</para>
+</entry><entry
+ align="char">
+<para>A demux with the same value of the id field already stored
+ in the directory.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSPC</para>
+</entry><entry
+ align="char">
+<para>No space left in the directory.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>dmx_unregister_demux()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function is called to indicate that the given demux interface is no
+ longer available. The caller of this function is responsible for freeing the
+ memory of the demux structure, if it was dynamically allocated before calling
+ dmx_register_demux(). The cleanup_module() function of the kernel module
+ that contains the demux driver should call this function. Note that this function
+ fails if the demux is currently in use, i.e., release_demux() has not been called
+ for the interface.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_unregister_demux ( dmx_demux_t &#x22C6;demux )</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux structure which is to be
+ unregistered.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>The specified demux is not registered in the demux
+ directory.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>The specified demux is currently in use.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>dmx_get_demuxes()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Provides the caller with the list of registered demux interfaces, using the
+ standard list structure defined in the include file linux/list.h. The include file
+ demux.h defines the macro DMX_DIR_ENTRY() for converting an element of
+ the generic type struct list_head* to the type dmx_demux_t*. The caller must
+ not free the memory of any of the elements obtained via this function call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>struct list_head &#x22C6;dmx_get_demuxes ()</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>none</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>struct list_head *</para>
+</entry><entry
+ align="char">
+<para>A list of demux interfaces, or NULL in the case of an
+ empty list.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="demux_api">
+<title>Demux API</title>
+<para>The demux API should be implemented for each demux in the system. It is used to select
+the TS source of a demux and to manage the demux resources. When the demux
+client allocates a resource via the demux API, it receives a pointer to the API of that
+resource.
+</para>
+<para>Each demux receives its TS input from a DVB front-end or from memory, as set via the
+demux API. In a system with more than one front-end, the API can be used to select one of
+the DVB front-ends as a TS source for a demux, unless this is fixed in the HW platform. The
+demux API only controls front-ends regarding their connections with demuxes; the APIs
+used to set the other front-end parameters, such as tuning, are not defined in this
+document.
+</para>
+<para>The functions that implement the abstract interface demux should be defined static or
+module private and registered to the Demux Directory for external access. It is not necessary
+to implement every function in the demux_t struct, however (for example, a demux interface
+might support Section filtering, but not TS or PES filtering). The API client is expected to
+check the value of any function pointer before calling the function: the value of NULL means
+&#8220;function not available&#8221;.
+</para>
+<para>Whenever the functions of the demux API modify shared data, the possibilities of lost
+update and race condition problems should be addressed, e.g. by protecting parts of code with
+mutexes. This is especially important on multi-processor hosts.
+</para>
+<para>Note that functions called from a bottom half context must not sleep, at least in the 2.2.x
+kernels. Even a simple memory allocation can result in a kernel thread being put to sleep if
+swapping is needed. For example, the Linux kernel calls the functions of a network device
+interface from a bottom half context. Thus, if a demux API function is called from network
+device code, the function must not sleep.
+</para>
+
+
+<section id="kdapi_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function reserves the demux for use by the caller and, if necessary,
+ initializes the demux. When the demux is no longer needed, the function close()
+ should be called. It should be possible for multiple clients to access the demux
+ at the same time. Thus, the function implementation should increment the
+ demux usage count when open() is called and decrement it when close() is
+ called.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open ( demux_t&#x22C6; demux );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EUSERS</para>
+</entry><entry
+ align="char">
+<para>Maximum usage count reached.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="kdapi_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function reserves the demux for use by the caller and, if necessary,
+ initializes the demux. When the demux is no longer needed, the function close()
+ should be called. It should be possible for multiple clients to access the demux
+ at the same time. Thus, the function implementation should increment the
+ demux usage count when open() is called and decrement it when close() is
+ called.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(demux_t&#x22C6; demux);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENODEV</para>
+</entry><entry
+ align="char">
+<para>The demux was not in use.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="kdapi_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function provides the demux driver with a memory buffer containing TS
+ packets. Instead of receiving TS packets from the DVB front-end, the demux
+ driver software will read packets from memory. Any clients of this demux
+ with active TS, PES or Section filters will receive filtered data via the Demux
+ callback API (see 0). The function returns when all the data in the buffer has
+ been consumed by the demux. Demux hardware typically cannot read TS from
+ memory. If this is the case, memory-based filtering has to be implemented
+ entirely in software.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int write(demux_t&#x22C6; demux, const char&#x22C6; buf, size_t
+ count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>const char* buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS data in kernel-space memory.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t length</para>
+</entry><entry
+ align="char">
+<para>Length of the TS data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>The command is not implemented.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>allocate_ts_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Allocates a new TS feed, which is used to filter the TS packets carrying a
+ certain PID. The TS feed normally corresponds to a hardware PID filter on the
+ demux chip.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int allocate_ts_feed(dmx_demux_t&#x22C6; demux,
+ dmx_ts_feed_t&#x22C6;&#x22C6; feed, dmx_ts_cb callback);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_feed_t**
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_cb callback</para>
+</entry><entry
+ align="char">
+<para>Pointer to the callback function for passing received TS
+ packet</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>No more TS feeds available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>The command is not implemented.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>release_ts_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Releases the resources allocated with allocate_ts_feed(). Any filtering in
+ progress on the TS feed should be stopped before calling this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int release_ts_feed(dmx_demux_t&#x22C6; demux,
+ dmx_ts_feed_t&#x22C6; feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>allocate_section_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Allocates a new section feed, i.e. a demux resource for filtering and receiving
+ sections. On platforms with hardware support for section filtering, a section
+ feed is directly mapped to the demux HW. On other platforms, TS packets are
+ first PID filtered in hardware and a hardware section filter then emulated in
+ software. The caller obtains an API pointer of type dmx_section_feed_t as an
+ out parameter. Using this API the caller can set filtering parameters and start
+ receiving sections.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int allocate_section_feed(dmx_demux_t&#x22C6; demux,
+ dmx_section_feed_t &#x22C6;&#x22C6;feed, dmx_section_cb callback);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_feed_t
+ **feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_cb
+ callback</para>
+</entry><entry
+ align="char">
+<para>Pointer to the callback function for passing received
+ sections.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>No more section feeds available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>The command is not implemented.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>release_section_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Releases the resources allocated with allocate_section_feed(), including
+ allocated filters. Any filtering in progress on the section feed should be stopped
+ before calling this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int release_section_feed(dmx_demux_t&#x22C6; demux,
+ dmx_section_feed_t &#x22C6;feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_feed_t
+ *feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>descramble_mac_address()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function runs a descrambling algorithm on the destination MAC
+ address field of a DVB Datagram Section, replacing the original address
+ with its un-encrypted version. Otherwise, the description on the function
+ descramble_section_payload() applies also to this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int descramble_mac_address(dmx_demux_t&#x22C6; demux, __u8
+ &#x22C6;buffer1, size_t buffer1_length, __u8 &#x22C6;buffer2,
+ size_t buffer2_length, __u16 pid);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t
+ *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8 *buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the first byte of the section.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer1.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8* buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the section data, or NULL. The
+ pointer has a non-NULL value if the section wraps past
+ the end of a circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer2.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>The PID on which the section was received. Useful
+ for obtaining the descrambling key, e.g. from a DVB
+ Common Access facility.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>descramble_section_payload()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function runs a descrambling algorithm on the payload of a DVB
+ Datagram Section, replacing the original payload with its un-encrypted
+ version. The function will be called from the demux API implementation;
+ the API client need not call this function directly. Section-level scrambling
+ algorithms are currently standardized only for DVB-RCC (return channel
+ over 2-directional cable TV network) systems. For all other DVB networks,
+ encryption schemes are likely to be proprietary to each data broadcaster. Thus,
+ it is expected that this function pointer will have the value of NULL (i.e.,
+ function not available) in most demux API implementations. Nevertheless, it
+ should be possible to use the function pointer as a hook for dynamically adding
+ a &#8220;plug-in&#8221; descrambling facility to a demux driver.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>While this function is not needed with hardware-based section descrambling,
+ the descramble_section_payload function pointer can be used to override the
+ default hardware-based descrambling algorithm: if the function pointer has a
+ non-NULL value, the corresponding function should be used instead of any
+ descrambling hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int descramble_section_payload(dmx_demux_t&#x22C6; demux,
+ __u8 &#x22C6;buffer1, size_t buffer1_length, __u8 &#x22C6;buffer2,
+ size_t buffer2_length, __u16 pid);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t
+ *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8 *buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the first byte of the section.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer1.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8 *buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the section data, or NULL. The
+ pointer has a non-NULL value if the section wraps past
+ the end of a circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer2.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>The PID on which the section was received. Useful
+ for obtaining the descrambling key, e.g. from a DVB
+ Common Access facility.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>add_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Registers a connectivity between a demux and a front-end, i.e., indicates that
+ the demux can be connected via a call to connect_frontend() to use the given
+ front-end as a TS source. The client of this function has to allocate dynamic or
+ static memory for the frontend structure and initialize its fields before calling
+ this function. This function is normally called during the driver initialization.
+ The caller must not free the memory of the frontend struct before successfully
+ calling remove_frontend().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int add_frontend(dmx_demux_t &#x22C6;demux, dmx_frontend_t
+ &#x22C6;frontend);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_frontend_t*
+ frontend</para>
+</entry><entry
+ align="char">
+<para>Pointer to the front-end instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EEXIST</para>
+</entry><entry
+ align="char">
+<para>A front-end with the same value of the id field already
+ registered.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINUSE</para>
+</entry><entry
+ align="char">
+<para>The demux is in use.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOMEM</para>
+</entry><entry
+ align="char">
+<para>No more front-ends can be added.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>remove_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Indicates that the given front-end, registered by a call to add_frontend(), can
+ no longer be connected as a TS source by this demux. The function should be
+ called when a front-end driver or a demux driver is removed from the system.
+ If the front-end is in use, the function fails with the return value of -EBUSY.
+ After successfully calling this function, the caller can free the memory of
+ the frontend struct if it was dynamically allocated before the add_frontend()
+ operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int remove_frontend(dmx_demux_t&#x22C6; demux,
+ dmx_frontend_t&#x22C6; frontend);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_frontend_t*
+ frontend</para>
+</entry><entry
+ align="char">
+<para>Pointer to the front-end instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>The front-end is in use, i.e. a call to connect_frontend()
+ has not been followed by a call to disconnect_frontend().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>get_frontends()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Provides the APIs of the front-ends that have been registered for this demux.
+ Any of the front-ends obtained with this call can be used as a parameter for
+ connect_frontend().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The include file demux.h contains the macro DMX_FE_ENTRY() for
+ converting an element of the generic type struct list_head* to the type
+ dmx_frontend_t*. The caller must not free the memory of any of the elements
+ obtained via this function call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>struct list_head&#x22C6; get_frontends(dmx_demux_t&#x22C6; demux);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*</para>
+</entry><entry
+ align="char">
+<para>A list of front-end interfaces, or NULL in the case of an
+ empty list.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>connect_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Connects the TS output of the front-end to the input of the demux. A demux
+ can only be connected to a front-end registered to the demux with the function
+ add_frontend().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>It may or may not be possible to connect multiple demuxes to the same
+ front-end, depending on the capabilities of the HW platform. When not used,
+ the front-end should be released by calling disconnect_frontend().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int connect_frontend(dmx_demux_t&#x22C6; demux,
+ dmx_frontend_t&#x22C6; frontend);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_frontend_t*
+ frontend</para>
+</entry><entry
+ align="char">
+<para>Pointer to the front-end instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>The front-end is in use.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>disconnect_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Disconnects the demux and a front-end previously connected by a
+ connect_frontend() call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int disconnect_frontend(dmx_demux_t&#x22C6; demux);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="demux_callback_api">
+<title>Demux Callback API</title>
+<para>This kernel-space API comprises the callback functions that deliver filtered data to the
+demux client. Unlike the other APIs, these API functions are provided by the client and called
+from the demux code.
+</para>
+<para>The function pointers of this abstract interface are not packed into a structure as in the
+other demux APIs, because the callback functions are registered and used independent
+of each other. As an example, it is possible for the API client to provide several
+callback functions for receiving TS packets and no callbacks for PES packets or
+sections.
+</para>
+<para>The functions that implement the callback API need not be re-entrant: when a demux
+driver calls one of these functions, the driver is not allowed to call the function again before
+the original call returns. If a callback is triggered by a hardware interrupt, it is recommended
+to use the Linux &#8220;bottom half&#8221; mechanism or start a tasklet instead of making the callback
+function call directly from a hardware interrupt.
+</para>
+
+<section
+role="subsection"><title>dmx_ts_cb()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function, provided by the client of the demux API, is called from the
+ demux code. The function is only called when filtering on this TS feed has
+ been enabled using the start_filtering() function.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Any TS packets that match the filter settings are copied to a circular buffer. The
+ filtered TS packets are delivered to the client using this callback function. The
+ size of the circular buffer is controlled by the circular_buffer_size parameter
+ of the set() function in the TS Feed API. It is expected that the buffer1 and
+ buffer2 callback parameters point to addresses within the circular buffer, but
+ other implementations are also possible. Note that the called party should not
+ try to free the memory the buffer1 and buffer2 parameters point to.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>When this function is called, the buffer1 parameter typically points to the
+ start of the first undelivered TS packet within a circular buffer. The buffer2
+ buffer parameter is normally NULL, except when the received TS packets have
+ crossed the last address of the circular buffer and &#8221;wrapped&#8221; to the beginning
+ of the buffer. In the latter case the buffer1 parameter would contain an address
+ within the circular buffer, while the buffer2 parameter would contain the first
+ address of the circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The number of bytes delivered with this function (i.e. buffer1_length +
+ buffer2_length) is usually equal to the value of callback_length parameter
+ given in the set() function, with one exception: if a timeout occurs before
+ receiving callback_length bytes of TS data, any undelivered packets are
+ immediately delivered to the client by calling this function. The timeout
+ duration is controlled by the set() function in the TS Feed API.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>If a TS packet is received with errors that could not be fixed by the TS-level
+ forward error correction (FEC), the Transport_error_indicator flag of the TS
+ packet header should be set. The TS packet should not be discarded, as
+ the error can possibly be corrected by a higher layer protocol. If the called
+ party is slow in processing the callback, it is possible that the circular buffer
+ eventually fills up. If this happens, the demux driver should discard any TS
+ packets received while the buffer is full. The error should be indicated to the
+ client on the next callback by setting the success parameter to the value of
+ DMX_OVERRUN_ERROR.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The type of data returned to the callback can be selected by the new
+ function int (*set_type) (struct dmx_ts_feed_s* feed, int type, dmx_ts_pes_t
+ pes_type) which is part of the dmx_ts_feed_s struct (also cf. to the
+ include file ost/demux.h) The type parameter decides if the raw TS packet
+ (TS_PACKET) or just the payload (TS_PACKET&#8212;TS_PAYLOAD_ONLY)
+ should be returned. If additionally the TS_DECODER bit is set the stream
+ will also be sent to the hardware MPEG decoder. In this case, the second
+ flag decides as what kind of data the stream should be interpreted. The
+ possible choices are one of DMX_TS_PES_AUDIO, DMX_TS_PES_VIDEO,
+ DMX_TS_PES_TELETEXT, DMX_TS_PES_SUBTITLE,
+ DMX_TS_PES_PCR, or DMX_TS_PES_OTHER.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_ts_cb(__u8&#x22C6; buffer1, size_t buffer1_length,
+ __u8&#x22C6; buffer2, size_t buffer2_length, dmx_ts_feed_t&#x22C6;
+ source, dmx_success_t success);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>__u8* buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the start of the filtered TS packets.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the TS data in buffer1.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8* buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the filtered TS packets, or NULL.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the TS data in buffer2.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_feed_t*
+ source</para>
+</entry><entry
+ align="char">
+<para>Indicates which TS feed is the source of the callback.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_success_t
+ success</para>
+</entry><entry
+ align="char">
+<para>Indicates if there was an error in TS reception.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>Continue filtering.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-1</para>
+</entry><entry
+ align="char">
+<para>Stop filtering - has the same effect as a call to
+ stop_filtering() on the TS Feed API.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>dmx_section_cb()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function, provided by the client of the demux API, is called from the
+ demux code. The function is only called when filtering of sections has been
+ enabled using the function start_filtering() of the section feed API. When the
+ demux driver has received a complete section that matches at least one section
+ filter, the client is notified via this callback function. Normally this function is
+ called for each received section; however, it is also possible to deliver multiple
+ sections with one callback, for example when the system load is high. If an
+ error occurs while receiving a section, this function should be called with
+ the corresponding error type set in the success field, whether or not there is
+ data to deliver. The Section Feed implementation should maintain a circular
+ buffer for received sections. However, this is not necessary if the Section Feed
+ API is implemented as a client of the TS Feed API, because the TS Feed
+ implementation then buffers the received data. The size of the circular buffer
+ can be configured using the set() function in the Section Feed API. If there
+ is no room in the circular buffer when a new section is received, the section
+ must be discarded. If this happens, the value of the success parameter should
+ be DMX_OVERRUN_ERROR on the next callback.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_section_cb(__u8&#x22C6; buffer1, size_t
+ buffer1_length, __u8&#x22C6; buffer2, size_t
+ buffer2_length, dmx_section_filter_t&#x22C6; source,
+ dmx_success_t success);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>__u8* buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the start of the filtered section, e.g. within the
+ circular buffer of the demux driver.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the filtered section data in buffer1, including
+ headers and CRC.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8* buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the filtered section data, or NULL.
+ Useful to handle the wrapping of a circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the filtered section data in buffer2, including
+ headers and CRC.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_filter_t*
+ filter</para>
+</entry><entry
+ align="char">
+<para>Indicates the filter that triggered the callback.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_success_t
+ success</para>
+</entry><entry
+ align="char">
+<para>Indicates if there was an error in section reception.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>Continue filtering.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-1</para>
+</entry><entry
+ align="char">
+<para>Stop filtering - has the same effect as a call to
+ stop_filtering() on the Section Feed API.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="ts_feed_api">
+<title>TS Feed API</title>
+<para>A TS feed is typically mapped to a hardware PID filter on the demux chip.
+Using this API, the client can set the filtering properties to start/stop filtering TS
+packets on a particular TS feed. The API is defined as an abstract interface of the type
+dmx_ts_feed_t.
+</para>
+<para>The functions that implement the interface should be defined static or module private. The
+client can get the handle of a TS feed API by calling the function allocate_ts_feed() in the
+demux API.
+</para>
+
+<section
+role="subsection"><title>set()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function sets the parameters of a TS feed. Any filtering in progress on the
+ TS feed must be stopped before calling this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int set ( dmx_ts_feed_t&#x22C6; feed, __u16 pid, size_t
+ callback_length, size_t circular_buffer_size, int
+ descramble, struct timespec timeout);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>PID value to filter. Only the TS packets carrying the
+ specified PID will be passed to the API client.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t
+ callback_length</para>
+</entry><entry
+ align="char">
+<para>Number of bytes to deliver with each call to the
+ dmx_ts_cb() callback function. The value of this
+ parameter should be a multiple of 188.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t
+ circular_buffer_size</para>
+</entry><entry
+ align="char">
+<para>Size of the circular buffer for the filtered TS packets.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int descramble</para>
+</entry><entry
+ align="char">
+<para>If non-zero, descramble the filtered TS packets.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct timespec
+ timeout</para>
+</entry><entry
+ align="char">
+<para>Maximum time to wait before delivering received TS
+ packets to the client.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Not enough memory for the requested buffer size.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available for TS.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>start_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Starts filtering TS packets on this TS feed, according to its settings. The PID
+ value to filter can be set by the API client. All matching TS packets are
+ delivered asynchronously to the client, using the callback function registered
+ with allocate_ts_feed().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int start_filtering(dmx_ts_feed_t&#x22C6; feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>stop_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Stops filtering TS packets on this TS feed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int stop_filtering(dmx_ts_feed_t&#x22C6; feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="section_feed_api">
+<title>Section Feed API</title>
+<para>A section feed is a resource consisting of a PID filter and a set of section filters. Using this
+API, the client can set the properties of a section feed and to start/stop filtering. The API is
+defined as an abstract interface of the type dmx_section_feed_t. The functions that implement
+the interface should be defined static or module private. The client can get the handle of
+a section feed API by calling the function allocate_section_feed() in the demux
+API.
+</para>
+<para>On demux platforms that provide section filtering in hardware, the Section Feed API
+implementation provides a software wrapper for the demux hardware. Other platforms may
+support only PID filtering in hardware, requiring that TS packets are converted to sections in
+software. In the latter case the Section Feed API implementation can be a client of the TS
+Feed API.
+</para>
+
+</section>
+<section id="kdapi_set">
+<title>set()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function sets the parameters of a section feed. Any filtering in progress on
+ the section feed must be stopped before calling this function. If descrambling
+ is enabled, the payload_scrambling_control and address_scrambling_control
+ fields of received DVB datagram sections should be observed. If either one is
+ non-zero, the section should be descrambled either in hardware or using the
+ functions descramble_mac_address() and descramble_section_payload() of the
+ demux API. Note that according to the MPEG-2 Systems specification, only
+ the payloads of private sections can be scrambled while the rest of the section
+ data must be sent in the clear.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int set(dmx_section_feed_t&#x22C6; feed, __u16 pid, size_t
+ circular_buffer_size, int descramble, int
+ check_crc);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>PID value to filter; only the TS packets carrying the
+ specified PID will be accepted.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t
+ circular_buffer_size</para>
+</entry><entry
+ align="char">
+<para>Size of the circular buffer for filtered sections.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int descramble</para>
+</entry><entry
+ align="char">
+<para>If non-zero, descramble any sections that are scrambled.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int check_crc</para>
+</entry><entry
+ align="char">
+<para>If non-zero, check the CRC values of filtered sections.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Not enough memory for the requested buffer size.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available for sections.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>allocate_filter()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function is used to allocate a section filter on the demux. It should only be
+ called when no filtering is in progress on this section feed. If a filter cannot be
+ allocated, the function fails with -ENOSPC. See in section ?? for the format of
+ the section filter.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The bitfields filter_mask and filter_value should only be modified when no
+ filtering is in progress on this section feed. filter_mask controls which bits of
+ filter_value are compared with the section headers/payload. On a binary value
+ of 1 in filter_mask, the corresponding bits are compared. The filter only accepts
+ sections that are equal to filter_value in all the tested bit positions. Any changes
+ to the values of filter_mask and filter_value are guaranteed to take effect only
+ when the start_filtering() function is called next time. The parent pointer in
+ the struct is initialized by the API implementation to the value of the feed
+ parameter. The priv pointer is not used by the API implementation, and can
+ thus be freely utilized by the caller of this function. Any data pointed to by the
+ priv pointer is available to the recipient of the dmx_section_cb() function call.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>While the maximum section filter length (DMX_MAX_FILTER_SIZE) is
+ currently set at 16 bytes, hardware filters of that size are not available on all
+ platforms. Therefore, section filtering will often take place first in hardware,
+ followed by filtering in software for the header bytes that were not covered
+ by a hardware filter. The filter_mask field can be checked to determine how
+ many bytes of the section filter are actually used, and if the hardware filter will
+ suffice. Additionally, software-only section filters can optionally be allocated
+ to clients when all hardware section filters are in use. Note that on most demux
+ hardware it is not possible to filter on the section_length field of the section
+ header &#8211; thus this field is ignored, even though it is included in filter_value and
+ filter_mask fields.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int allocate_filter(dmx_section_feed_t&#x22C6; feed,
+ dmx_section_filter_t&#x22C6;&#x22C6; filter);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_filter_t**
+ filter</para>
+</entry><entry
+ align="char">
+<para>Pointer to the allocated filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSPC</para>
+</entry><entry
+ align="char">
+<para>No filters of given type and length available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>release_filter()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function releases all the resources of a previously allocated section filter.
+ The function should not be called while filtering is in progress on this section
+ feed. After calling this function, the caller should not try to dereference the
+ filter pointer.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int release_filter ( dmx_section_feed_t&#x22C6; feed,
+ dmx_section_filter_t&#x22C6; filter);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_filter_t*
+ filter</para>
+</entry><entry
+ align="char">
+<para>I/O Pointer to the instance data of a section filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENODEV</para>
+</entry><entry
+ align="char">
+<para>No such filter allocated.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>start_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Starts filtering sections on this section feed, according to its settings. Sections
+ are first filtered based on their PID and then matched with the section
+ filters allocated for this feed. If the section matches the PID filter and
+ at least one section filter, it is delivered to the API client. The section
+ is delivered asynchronously using the callback function registered with
+ allocate_section_feed().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int start_filtering ( dmx_section_feed_t&#x22C6; feed );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>stop_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Stops filtering sections on this section feed. Note that any changes to the
+ filtering parameters (filter_value, filter_mask, etc.) should only be made when
+ filtering is stopped.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int stop_filtering ( dmx_section_feed_t&#x22C6; feed );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
diff --git a/Documentation/DocBook/media/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml
new file mode 100644
index 000000000000..67d37e5ce597
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/net.xml
@@ -0,0 +1,29 @@
+<title>DVB Network API</title>
+<para>The DVB net device enables feeding of MPE (multi protocol encapsulation) packets
+received via DVB into the Linux network protocol stack, e.g. for internet via satellite
+applications. It can be accessed through <emphasis role="tt">/dev/dvb/adapter0/net0</emphasis>. Data types and
+and ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/net.h</emphasis> in your
+application.
+</para>
+<section id="dvb_net_types">
+<title>DVB Net Data Types</title>
+
+<section id="dvb-net-if">
+<title>struct dvb_net_if</title>
+<programlisting>
+struct dvb_net_if {
+	__u16 pid;
+	__u16 if_num;
+	__u8  feedtype;
+#define DVB_NET_FEEDTYPE_MPE 0	/&#x22C6; multi protocol encapsulation &#x22C6;/
+#define DVB_NET_FEEDTYPE_ULE 1	/&#x22C6; ultra lightweight encapsulation &#x22C6;/
+};
+</programlisting>
+</section>
+
+</section>
+<section id="net_fcalls">
+<title>DVB net Function Calls</title>
+<para>To be written&#x2026;
+</para>
+</section>
diff --git a/Documentation/DocBook/media/dvb/video.xml b/Documentation/DocBook/media/dvb/video.xml
new file mode 100644
index 000000000000..25fb823226b4
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/video.xml
@@ -0,0 +1,1657 @@
+<title>DVB Video Device</title>
+<para>The DVB video device controls the MPEG2 video decoder of the DVB hardware. It
+can be accessed through <emphasis role="tt">/dev/dvb/adapter0/video0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your
+application.
+</para>
+<para>Note that the DVB video device only controls decoding of the MPEG video stream, not
+its presentation on the TV or computer screen. On PCs this is typically handled by an
+associated video4linux device, e.g. <emphasis role="tt">/dev/video</emphasis>, which allows scaling and defining output
+windows.
+</para>
+<para>Some DVB cards don&#8217;t have their own MPEG decoder, which results in the omission of
+the audio and video device as well as the video4linux device.
+</para>
+<para>The ioctls that deal with SPUs (sub picture units) and navigation packets are only
+supported on some MPEG decoders made for DVD playback.
+</para>
+<section id="video_types">
+<title>Video Data Types</title>
+
+<section id="video-format-t">
+<title>video_format_t</title>
+<para>The <emphasis role="tt">video_format_t</emphasis> data type defined by
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_FORMAT_4_3,     /&#x22C6; Select 4:3 format &#x22C6;/
+	VIDEO_FORMAT_16_9,    /&#x22C6; Select 16:9 format. &#x22C6;/
+	VIDEO_FORMAT_221_1    /&#x22C6; 2.21:1 &#x22C6;/
+} video_format_t;
+</programlisting>
+<para>is used in the VIDEO_SET_FORMAT function (??) to tell the driver which aspect ratio
+the output hardware (e.g. TV) has. It is also used in the data structures video_status
+(??) returned by VIDEO_GET_STATUS (??) and video_event (??) returned by
+VIDEO_GET_EVENT (??) which report about the display format of the current video
+stream.
+</para>
+</section>
+
+<section id="video-displayformat-t">
+<title>video_displayformat_t</title>
+<para>In case the display format of the video stream and of the display hardware differ the
+application has to specify how to handle the cropping of the picture. This can be done using
+the VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_PAN_SCAN,       /&#x22C6; use pan and scan format &#x22C6;/
+	VIDEO_LETTER_BOX,     /&#x22C6; use letterbox format &#x22C6;/
+	VIDEO_CENTER_CUT_OUT  /&#x22C6; use center cut out format &#x22C6;/
+} video_displayformat_t;
+</programlisting>
+<para>as argument.
+</para>
+</section>
+
+<section id="video-stream-source-t">
+<title>video stream source</title>
+<para>The video stream source is set through the VIDEO_SELECT_SOURCE call and can take
+the following values, depending on whether we are replaying from an internal (demuxer) or
+external (user write) source.
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_SOURCE_DEMUX, /&#x22C6; Select the demux as the main source &#x22C6;/
+	VIDEO_SOURCE_MEMORY /&#x22C6; If this source is selected, the stream
+			       comes from the user through the write
+			       system call &#x22C6;/
+} video_stream_source_t;
+</programlisting>
+<para>VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the
+DVR device) as the source of the video stream. If VIDEO_SOURCE_MEMORY
+is selected the stream comes from the application through the <emphasis role="tt">write()</emphasis> system
+call.
+</para>
+</section>
+
+<section id="video-play-state-t">
+<title>video play state</title>
+<para>The following values can be returned by the VIDEO_GET_STATUS call representing the
+state of video playback.
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_STOPPED, /&#x22C6; Video is stopped &#x22C6;/
+	VIDEO_PLAYING, /&#x22C6; Video is currently playing &#x22C6;/
+	VIDEO_FREEZED  /&#x22C6; Video is freezed &#x22C6;/
+} video_play_state_t;
+</programlisting>
+</section>
+
+<section id="video-command">
+<para>The structure must be zeroed before use by the application
+This ensures it can be extended safely in the future.</para>
+<title>struct video-command</title>
+<programlisting>
+struct video_command {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/&#x22C6; 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   &gt;>1: playback at speed/1000 of the normal speed,
+			   &lt;-1: reverse playback at (-speed/1000) of the normal speed. &#x22C6;/
+			__s32 speed;
+			__u32 format;
+		} play;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+</programlisting>
+</section>
+
+<section id="video-size-t">
+<title>struct video_size-t</title>
+<programlisting>
+typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+} video_size_t;
+</programlisting>
+</section>
+
+
+<section id="video-event">
+<title>struct video_event</title>
+<para>The following is the structure of a video event as it is returned by the VIDEO_GET_EVENT
+call.
+</para>
+<programlisting>
+struct video_event {
+	__s32 type;
+#define VIDEO_EVENT_SIZE_CHANGED	1
+#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
+#define VIDEO_EVENT_DECODER_STOPPED 	3
+#define VIDEO_EVENT_VSYNC 		4
+	__kernel_time_t timestamp;
+	union {
+		video_size_t size;
+		unsigned int frame_rate;	/&#x22C6; in frames per 1000sec &#x22C6;/
+		unsigned char vsync_field;	/&#x22C6; unknown/odd/even/progressive &#x22C6;/
+	} u;
+};
+</programlisting>
+</section>
+
+<section id="video-status">
+<title>struct video_status</title>
+<para>The VIDEO_GET_STATUS call returns the following structure informing about various
+states of the playback operation.
+</para>
+<programlisting>
+struct video_status {
+	int                   video_blank;   /&#x22C6; blank video on freeze? &#x22C6;/
+	video_play_state_t    play_state;    /&#x22C6; current state of playback &#x22C6;/
+	video_stream_source_t stream_source; /&#x22C6; current source (demux/memory) &#x22C6;/
+	video_format_t        video_format;  /&#x22C6; current aspect ratio of stream &#x22C6;/
+	video_displayformat_t display_format;/&#x22C6; selected cropping mode &#x22C6;/
+};
+</programlisting>
+<para>If video_blank is set video will be blanked out if the channel is changed or if playback is
+stopped. Otherwise, the last picture will be displayed. play_state indicates if the video is
+currently frozen, stopped, or being played back. The stream_source corresponds to the seleted
+source for the video stream. It can come either from the demultiplexer or from memory.
+The video_format indicates the aspect ratio (one of 4:3 or 16:9) of the currently
+played video stream. Finally, display_format corresponds to the selected cropping
+mode in case the source video format is not the same as the format of the output
+device.
+</para>
+</section>
+
+<section id="video-still-picture">
+<title>struct video_still_picture</title>
+<para>An I-frame displayed via the VIDEO_STILLPICTURE call is passed on within the
+following structure.
+</para>
+<programlisting>
+/&#x22C6; pointer to and size of a single iframe in memory &#x22C6;/
+struct video_still_picture {
+	char &#x22C6;iFrame;        /&#x22C6; pointer to a single iframe in memory &#x22C6;/
+	int32_t size;
+};
+</programlisting>
+</section>
+
+<section id="video_caps">
+<title>video capabilities</title>
+<para>A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the following
+bits set according to the hardwares capabilities.
+</para>
+<programlisting>
+ /&#x22C6; bit definitions for capabilities: &#x22C6;/
+ /&#x22C6; can the hardware decode MPEG1 and/or MPEG2? &#x22C6;/
+ #define VIDEO_CAP_MPEG1   1
+ #define VIDEO_CAP_MPEG2   2
+ /&#x22C6; can you send a system and/or program stream to video device?
+    (you still have to open the video and the audio device but only
+     send the stream to the video device) &#x22C6;/
+ #define VIDEO_CAP_SYS     4
+ #define VIDEO_CAP_PROG    8
+ /&#x22C6; can the driver also handle SPU, NAVI and CSS encoded data?
+    (CSS API is not present yet) &#x22C6;/
+ #define VIDEO_CAP_SPU    16
+ #define VIDEO_CAP_NAVI   32
+ #define VIDEO_CAP_CSS    64
+</programlisting>
+</section>
+
+<section id="video-system">
+<title>video system</title>
+<para>A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The
+following system types can be set:
+</para>
+<programlisting>
+typedef enum {
+	 VIDEO_SYSTEM_PAL,
+	 VIDEO_SYSTEM_NTSC,
+	 VIDEO_SYSTEM_PALN,
+	 VIDEO_SYSTEM_PALNc,
+	 VIDEO_SYSTEM_PALM,
+	 VIDEO_SYSTEM_NTSC60,
+	 VIDEO_SYSTEM_PAL60,
+	 VIDEO_SYSTEM_PALM60
+} video_system_t;
+</programlisting>
+</section>
+
+<section id="video-highlight">
+<title>struct video_highlight</title>
+<para>Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight information. The
+call expects the following format for that information:
+</para>
+<programlisting>
+ typedef
+ struct video_highlight {
+	 boolean active;      /&#x22C6;    1=show highlight, 0=hide highlight &#x22C6;/
+	 uint8_t contrast1;   /&#x22C6;    7- 4  Pattern pixel contrast &#x22C6;/
+			      /&#x22C6;    3- 0  Background pixel contrast &#x22C6;/
+	 uint8_t contrast2;   /&#x22C6;    7- 4  Emphasis pixel-2 contrast &#x22C6;/
+			      /&#x22C6;    3- 0  Emphasis pixel-1 contrast &#x22C6;/
+	 uint8_t color1;      /&#x22C6;    7- 4  Pattern pixel color &#x22C6;/
+			      /&#x22C6;    3- 0  Background pixel color &#x22C6;/
+	 uint8_t color2;      /&#x22C6;    7- 4  Emphasis pixel-2 color &#x22C6;/
+			      /&#x22C6;    3- 0  Emphasis pixel-1 color &#x22C6;/
+	 uint32_t ypos;       /&#x22C6;   23-22  auto action mode &#x22C6;/
+			      /&#x22C6;   21-12  start y &#x22C6;/
+			      /&#x22C6;    9- 0  end y &#x22C6;/
+	 uint32_t xpos;       /&#x22C6;   23-22  button color number &#x22C6;/
+			      /&#x22C6;   21-12  start x &#x22C6;/
+			      /&#x22C6;    9- 0  end x &#x22C6;/
+ } video_highlight_t;
+</programlisting>
+
+</section>
+<section id="video-spu">
+<title>video SPU</title>
+<para>Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the
+following format:
+</para>
+<programlisting>
+ typedef
+ struct video_spu {
+	 boolean active;
+	 int stream_id;
+ } video_spu_t;
+</programlisting>
+
+</section>
+<section id="video-spu-palette">
+<title>video SPU palette</title>
+<para>The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE:
+</para>
+<programlisting>
+ typedef
+ struct video_spu_palette{
+	 int length;
+	 uint8_t &#x22C6;palette;
+ } video_spu_palette_t;
+</programlisting>
+
+</section>
+<section id="video-navi-pack">
+<title>video NAVI pack</title>
+<para>In order to get the navigational data the following structure has to be passed to the ioctl
+VIDEO_GET_NAVI:
+</para>
+<programlisting>
+ typedef
+ struct video_navi_pack{
+	 int length;         /&#x22C6; 0 ... 1024 &#x22C6;/
+	 uint8_t data[1024];
+ } video_navi_pack_t;
+</programlisting>
+</section>
+
+
+<section id="video-attributes-t">
+<title>video attributes</title>
+<para>The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES:
+</para>
+<programlisting>
+ typedef uint16_t video_attributes_t;
+ /&#x22C6;   bits: descr. &#x22C6;/
+ /&#x22C6;   15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) &#x22C6;/
+ /&#x22C6;   13-12 TV system (0=525/60, 1=625/50) &#x22C6;/
+ /&#x22C6;   11-10 Aspect ratio (0=4:3, 3=16:9) &#x22C6;/
+ /&#x22C6;    9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca &#x22C6;/
+ /&#x22C6;    7    line 21-1 data present in GOP (1=yes, 0=no) &#x22C6;/
+ /&#x22C6;    6    line 21-2 data present in GOP (1=yes, 0=no) &#x22C6;/
+ /&#x22C6;    5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 &#x22C6;/
+ /&#x22C6;    2    source letterboxed (1=yes, 0=no) &#x22C6;/
+ /&#x22C6;    0    film/camera mode (0=camera, 1=film (625/50 only)) &#x22C6;/
+</programlisting>
+</section></section>
+
+
+<section id="video_function_calls">
+<title>Video Function Calls</title>
+
+
+<section id="video_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call opens a named video device (e.g. /dev/dvb/adapter0/video0)
+ for subsequent use.</para>
+<para>When an open() call has succeeded, the device will be ready for use.
+ The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call. This is a standard system call, documented in the Linux
+ manual page for fcntl. Only one user can open the Video Device in O_RDWR
+ mode. All other attempts to open the device in this mode will fail, and an
+ error-code will be returned. If the Video Device is opened in O_RDONLY
+ mode, the only ioctl call that can be used is VIDEO_GET_STATUS. All other
+ call will return an error code.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="video_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened video device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="video_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call can only be used if VIDEO_SOURCE_MEMORY is selected
+ in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in
+ PES format, unless the capability allows other formats. If O_NONBLOCK is
+ not specified the function will block until buffer space is available. The amount
+ of data to be transferred is implied by count.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>size_t write(int fd, const void &#x22C6;buf, size_t count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer containing the PES data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Attempted to write more data than the internal buffer can
+ hold.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_STOP"
+role="subsection"><title>VIDEO_STOP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to stop playing the current stream.
+ Depending on the input parameter, the screen can be blanked out or displaying
+ the last decoded frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_STOP, boolean
+ mode);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_STOP for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Boolean mode</para>
+</entry><entry
+ align="char">
+<para>Indicates how the screen shall be handled.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE: Blank screen when stop.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE: Show last decoded frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_PLAY"
+role="subsection"><title>VIDEO_PLAY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to start playing a video stream from the
+ selected source.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_PLAY);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_PLAY for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_FREEZE"
+role="subsection"><title>VIDEO_FREEZE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call suspends the live video stream being played. Decoding
+ and playing are frozen. It is then possible to restart the decoding
+ and playing process of the video stream using the VIDEO_CONTINUE
+ command. If VIDEO_SOURCE_MEMORY is selected in the ioctl call
+ VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more
+ data until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_FREEZE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_FREEZE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_CONTINUE"
+role="subsection"><title>VIDEO_CONTINUE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call restarts decoding and playing processes of the video stream
+ which was played before a call to VIDEO_FREEZE was made.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_CONTINUE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_CONTINUE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SELECT_SOURCE"
+role="subsection"><title>VIDEO_SELECT_SOURCE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call informs the video device which source shall be used for the input
+ data. The possible sources are demux or memory. If memory is selected, the
+ data is fed to the video device through the write command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SELECT_SOURCE,
+ video_stream_source_t source);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SELECT_SOURCE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_stream_source_t
+ source</para>
+</entry><entry
+ align="char">
+<para>Indicates which source shall be used for the Video stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_BLANK"
+role="subsection"><title>VIDEO_SET_BLANK</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to blank out the picture.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SET_BLANK, boolean
+ mode);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_BLANK for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean mode</para>
+</entry><entry
+ align="char">
+<para>TRUE: Blank screen when stop.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE: Show last decoded frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_STATUS"
+role="subsection"><title>VIDEO_GET_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to return the current status of the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_GET_STATUS, struct
+ video_status &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_STATUS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct video_status
+ *status</para>
+</entry><entry
+ align="char">
+<para>Returns the current status of the Video Device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_EVENT"
+role="subsection"><title>VIDEO_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns an event of type video_event if available. If an event is
+ not available, the behavior depends on whether the device is in blocking or
+ non-blocking mode. In the latter case, the call fails immediately with errno
+ set to EWOULDBLOCK. In the former case, the call blocks until an event
+ becomes available. The standard Linux poll() and/or select() system calls can
+ be used with the device file descriptor to watch for new events. For select(),
+ the file descriptor should be included in the exceptfds argument, and for
+ poll(), POLLPRI should be specified as the wake-up condition. Read-only
+ permissions are sufficient for this ioctl call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_GET_EVENT, struct
+ video_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_EVENT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct video_event
+ *ev</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the event, if any, is to be
+ stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+<para>Overflow in event queue - one or more events were lost.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_DISPLAY_FORMAT"
+role="subsection"><title>VIDEO_SET_DISPLAY_FORMAT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to select the video format to be applied
+ by the MPEG chip on the video.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request =
+ VIDEO_SET_DISPLAY_FORMAT, video_display_format_t
+ format);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_DISPLAY_FORMAT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_display_format_t
+ format</para>
+</entry><entry
+ align="char">
+<para>Selects the video format to be used.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_STILLPICTURE"
+role="subsection"><title>VIDEO_STILLPICTURE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to display a still picture (I-frame). The
+ input data shall contain an I-frame. If the pointer is NULL, then the current
+ displayed still picture is blanked.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_STILLPICTURE,
+ struct video_still_picture &#x22C6;sp);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_STILLPICTURE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ video_still_picture
+ *sp</para>
+</entry><entry
+ align="char">
+<para>Pointer to a location where an I-frame and size is stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_FAST_FORWARD"
+role="subsection"><title>VIDEO_FAST_FORWARD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to skip decoding of N number of I-frames.
+ This call can only be used if VIDEO_SOURCE_MEMORY is selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_FAST_FORWARD, int
+ nFrames);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_FAST_FORWARD for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int nFrames</para>
+</entry><entry
+ align="char">
+<para>The number of frames to skip.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SLOWMOTION"
+role="subsection"><title>VIDEO_SLOWMOTION</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the video device to repeat decoding frames N number of
+ times. This call can only be used if VIDEO_SOURCE_MEMORY is selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SLOWMOTION, int
+ nFrames);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SLOWMOTION for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int nFrames</para>
+</entry><entry
+ align="char">
+<para>The number of times to repeat each frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_GET_CAPABILITIES"
+role="subsection"><title>VIDEO_GET_CAPABILITIES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the video device about its decoding capabilities. On success
+ it returns and integer which has bits set according to the defines in section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_GET_CAPABILITIES,
+ unsigned int &#x22C6;cap);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_CAPABILITIES for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned int *cap</para>
+</entry><entry
+ align="char">
+<para>Pointer to a location where to store the capability
+ information.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_ID"
+role="subsection"><title>VIDEO_SET_ID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl selects which sub-stream is to be decoded if a program or system
+ stream is sent to the video device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = VIDEO_SET_ID, int
+ id);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int id</para>
+</entry><entry
+ align="char">
+<para>video sub-stream id</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid sub-stream id.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_CLEAR_BUFFER"
+role="subsection"><title>VIDEO_CLEAR_BUFFER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call clears all video buffers in the driver and in the decoder hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_CLEAR_BUFFER);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_CLEAR_BUFFER for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_STREAMTYPE"
+role="subsection"><title>VIDEO_SET_STREAMTYPE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl tells the driver which kind of stream to expect being written to it. If
+ this call is not used the default of video PES is used. Some drivers might not
+ support this call and always expect PES.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SET_STREAMTYPE,
+ int type);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_STREAMTYPE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int type</para>
+</entry><entry
+ align="char">
+<para>stream type</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_FORMAT"
+role="subsection"><title>VIDEO_SET_FORMAT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the screen format (aspect ratio) of the connected output device
+ (TV) so that the output of the decoder can be adjusted accordingly.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_FORMAT,
+ video_format_t format);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_FORMAT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_format_t
+ format</para>
+</entry><entry
+ align="char">
+<para>video format of TV as defined in section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>format is not a valid video format.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_SYSTEM"
+role="subsection"><title>VIDEO_SET_SYSTEM</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the television output format. The format (see section ??) may
+ vary from the color format of the displayed MPEG stream. If the hardware is
+ not able to display the requested format the call will return an error.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_SYSTEM ,
+ video_system_t system);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_FORMAT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_system_t
+ system</para>
+</entry><entry
+ align="char">
+<para>video system of TV output.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>system is not a valid or supported video system.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_HIGHLIGHT"
+role="subsection"><title>VIDEO_SET_HIGHLIGHT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the SPU highlight information for the menu access of a DVD.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT
+ ,video_highlight_t &#x22C6;vhilite)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_HIGHLIGHT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_highlight_t
+ *vhilite</para>
+</entry><entry
+ align="char">
+<para>SPU Highlight information according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_SPU"
+role="subsection"><title>VIDEO_SET_SPU</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl activates or deactivates SPU decoding in a DVD input stream. It can
+ only be used, if the driver is able to handle a DVD stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_SPU ,
+ video_spu_t &#x22C6;spu)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_SPU for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_spu_t *spu</para>
+</entry><entry
+ align="char">
+<para>SPU decoding (de)activation and subid setting according
+ to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>input is not a valid spu setting or driver cannot handle
+ SPU.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_SPU_PALETTE"
+role="subsection"><title>VIDEO_SET_SPU_PALETTE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the SPU color palette.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE
+ ,video_spu_palette_t &#x22C6;palette )</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_SPU_PALETTE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_spu_palette_t
+ *palette</para>
+</entry><entry
+ align="char">
+<para>SPU palette according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>input is not a valid palette or driver doesn&#8217;t handle SPU.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_GET_NAVI"
+role="subsection"><title>VIDEO_GET_NAVI</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl returns navigational information from the DVD stream. This is
+ especially needed if an encoded stream has to be decoded by the hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_GET_NAVI ,
+ video_navi_pack_t &#x22C6;navipack)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_NAVI for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_navi_pack_t
+ *navipack</para>
+</entry><entry
+ align="char">
+<para>PCI or DSI pack (private stream 2) according to section
+ ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>driver is not able to return navigational information</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_ATTRIBUTES"
+role="subsection"><title>VIDEO_SET_ATTRIBUTES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is intended for DVD playback and allows you to set certain
+ information about the stream. Some hardware may not need this information,
+ but the call also tells the hardware to prepare for DVD playback.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE
+ ,video_attributes_t vattr)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_ATTRIBUTE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_attributes_t
+ vattr</para>
+</entry><entry
+ align="char">
+<para>video attributes according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>input is not a valid attribute setting.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>