summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBing Zhao <bzhao@marvell.com>2013-11-01 15:28:24 -0700
committerGustavo Padovan <gustavo.padovan@collabora.co.uk>2013-12-04 11:09:03 -0200
commit433a9389a11778f1bc342789abccac9ce46eee82 (patch)
treea19a6f853df611fa8e63e673f57bbd8bdc2c7e01
parent3e4543abf9deea8733341d235719e7e02b4068ed (diff)
downloadblackbird-op-linux-433a9389a11778f1bc342789abccac9ce46eee82.tar.gz
blackbird-op-linux-433a9389a11778f1bc342789abccac9ce46eee82.zip
Bluetooth: btmrvl: use cal-data from device-tree instead of conf file
Some ARM versions of Chromebook need to download a new calibration data from host driver to firmware. They do have EEPROM but still need a piece of new calibration data in test mode. The cal-data is platform dependent. It's simpler and more feasible to use device tree based cal-data instead of configuration file based cal-data. This patch remove configuration file based cal-data downloading and replace it using cal-data from device tree. When CONFIG_OF is not selected, or the specific property is not present in the device tree, the calibration downloading will not happen. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-rw-r--r--drivers/bluetooth/btmrvl_drv.h4
-rw-r--r--drivers/bluetooth/btmrvl_main.c92
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c9
-rw-r--r--drivers/bluetooth/btmrvl_sdio.h2
4 files changed, 18 insertions, 89 deletions
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index e3b49c68ea71..98187f09393d 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,8 +23,6 @@
#include <linux/bitops.h>
#include <linux/slab.h>
#include <net/bluetooth/bluetooth.h>
-#include <linux/ctype.h>
-#include <linux/firmware.h>
#define BTM_HEADER_LEN 4
#define BTM_UPLD_SIZE 2312
@@ -43,8 +41,6 @@ struct btmrvl_thread {
struct btmrvl_device {
void *card;
struct hci_dev *hcidev;
- struct device *dev;
- const char *cal_data;
u8 dev_type;
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 477b658316b4..6441f724aeb0 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -19,7 +19,7 @@
**/
#include <linux/module.h>
-
+#include <linux/of.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -414,52 +414,8 @@ static int btmrvl_open(struct hci_dev *hdev)
return 0;
}
-/*
- * This function parses provided calibration data input. It should contain
- * hex bytes separated by space or new line character. Here is an example.
- * 00 1C 01 37 FF FF FF FF 02 04 7F 01
- * CE BA 00 00 00 2D C6 C0 00 00 00 00
- * 00 F0 00 00
- */
-static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
-{
- const u8 *s = src;
- u8 *d = dst;
- int ret;
- u8 tmp[3];
-
- tmp[2] = '\0';
- while ((s - src) <= len - 2) {
- if (isspace(*s)) {
- s++;
- continue;
- }
-
- if (isxdigit(*s)) {
- if ((d - dst) >= dst_size) {
- BT_ERR("calibration data file too big!!!");
- return -EINVAL;
- }
-
- memcpy(tmp, s, 2);
-
- ret = kstrtou8(tmp, 16, d++);
- if (ret < 0)
- return ret;
-
- s += 2;
- } else {
- return -EINVAL;
- }
- }
- if (d == dst)
- return -EINVAL;
-
- return 0;
-}
-
-static int btmrvl_load_cal_data(struct btmrvl_private *priv,
- u8 *config_data)
+static int btmrvl_download_cal_data(struct btmrvl_private *priv,
+ u8 *config_data)
{
int i, ret;
u8 data[BT_CMD_DATA_SIZE];
@@ -487,54 +443,40 @@ static int btmrvl_load_cal_data(struct btmrvl_private *priv,
return 0;
}
-static int
-btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+static int btmrvl_cal_data_dt(struct btmrvl_private *priv)
{
+ struct device_node *dt_node;
u8 cal_data[BT_CAL_DATA_SIZE];
+ const char name[] = "btmrvl_caldata";
+ const char property[] = "btmrvl,caldata";
int ret;
- ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+ dt_node = of_find_node_by_name(NULL, name);
+ if (!dt_node)
+ return -ENODEV;
+
+ ret = of_property_read_u8_array(dt_node, property, cal_data,
+ sizeof(cal_data));
if (ret)
return ret;
- ret = btmrvl_load_cal_data(priv, cal_data);
+ BT_DBG("Use cal data from device tree");
+ ret = btmrvl_download_cal_data(priv, cal_data);
if (ret) {
- BT_ERR("Fail to load calibrate data");
+ BT_ERR("Fail to download calibrate data");
return ret;
}
return 0;
}
-static int btmrvl_cal_data_config(struct btmrvl_private *priv)
-{
- const struct firmware *cfg;
- int ret;
- const char *cal_data = priv->btmrvl_dev.cal_data;
-
- if (!cal_data)
- return 0;
-
- ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
- if (ret < 0) {
- BT_DBG("Failed to get %s file, skipping cal data download",
- cal_data);
- return 0;
- }
-
- ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
- release_firmware(cfg);
- return ret;
-}
-
static int btmrvl_setup(struct hci_dev *hdev)
{
struct btmrvl_private *priv = hci_get_drvdata(hdev);
btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
- if (btmrvl_cal_data_config(priv))
- BT_ERR("Set cal data failed");
+ btmrvl_cal_data_dt(priv);
priv->btmrvl_dev.psmode = 1;
btmrvl_enable_ps(priv);
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index fabcf5bb48af..1b52c9f5230d 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -18,6 +18,7 @@
* this warranty disclaimer.
**/
+#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/mmc/sdio_ids.h>
@@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
- .cal_data = NULL,
.reg = &btmrvl_reg_8688,
.sd_blksz_fw_dl = 64,
};
@@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
- .cal_data = NULL,
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.helper = NULL,
.firmware = "mrvl/sd8797_uapsta.bin",
- .cal_data = "mrvl/sd8797_caldata.conf",
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.helper = NULL,
.firmware = "mrvl/sd8897_uapsta.bin",
- .cal_data = NULL,
.reg = &btmrvl_reg_88xx,
.sd_blksz_fw_dl = 256,
};
@@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
struct btmrvl_sdio_device *data = (void *) id->driver_data;
card->helper = data->helper;
card->firmware = data->firmware;
- card->cal_data = data->cal_data;
card->reg = data->reg;
card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
}
@@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
}
card->priv = priv;
- priv->btmrvl_dev.dev = &card->func->dev;
- priv->btmrvl_dev.cal_data = card->cal_data;
/* Initialize the interface specific function pointers */
priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 6872d9ecac07..43d35a609ca9 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -85,7 +85,6 @@ struct btmrvl_sdio_card {
u32 ioport;
const char *helper;
const char *firmware;
- const char *cal_data;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
u8 rx_unit;
@@ -95,7 +94,6 @@ struct btmrvl_sdio_card {
struct btmrvl_sdio_device {
const char *helper;
const char *firmware;
- const char *cal_data;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
};
OpenPOWER on IntegriCloud