summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2009-12-08 01:54:35 +0300
committerKumar Gala <galak@kernel.crashing.org>2009-12-09 14:50:40 -0600
commitf93611fac7eed3aa175795fb8e452aa30af33b6a (patch)
tree37b3e9e8e9065ee80aefb02800fe1b88c697cf4b
parente090aa80321b64c3b793f3b047e31ecf1af9538d (diff)
downloadblackbird-op-linux-f93611fac7eed3aa175795fb8e452aa30af33b6a.tar.gz
blackbird-op-linux-f93611fac7eed3aa175795fb8e452aa30af33b6a.zip
powerpc/fsl_pci: Fix P2P bridge handling for MPC83xx PCIe controllers
It appears that we wrongly calculate dev_base for type1 config cycles. The thing is: we shouldn't subtract hose->first_busno because PCI core sets PCI primary, secondary and subordinate bus numbers, and PCIe controller actually takes the registers into account. So we should use just bus->number. Also, according to MPC8315 reference manual, primary bus number should always remain 0. We have PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS quirk in indirect_pci.c, but since 83xx is somewhat special, it doesn't use indirect_pci.c routines, so we have to implement the quirk specifically for 83xx PCIe controllers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c8
1 files changed, 6 insertions, 2 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4e3a3e345ab3..e1a028c1f18d 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -464,8 +464,7 @@ static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
{
struct pci_controller *hose = pci_bus_to_host(bus);
struct mpc83xx_pcie_priv *pcie = hose->dn->data;
- u8 bus_no = bus->number - hose->first_busno;
- u32 dev_base = bus_no << 24 | devfn << 16;
+ u32 dev_base = bus->number << 24 | devfn << 16;
int ret;
ret = mpc83xx_pcie_exclude_device(bus, devfn);
@@ -515,12 +514,17 @@ static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
+ struct pci_controller *hose = pci_bus_to_host(bus);
void __iomem *cfg_addr;
cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
if (!cfg_addr)
return PCIBIOS_DEVICE_NOT_FOUND;
+ /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
+ if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
+ val &= 0xffffff00;
+
switch (len) {
case 1:
out_8(cfg_addr, val);
OpenPOWER on IntegriCloud