summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authoreric miao <eric.y.miao@gmail.com>2007-08-29 10:22:17 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-10-12 21:15:33 +0100
commitc95530c7798b760901c5d6212e528b03e323b8ac (patch)
tree9bb58fcfaa0b7d44da117d94fc2b7606bbb9d98e
parent30f0b40844e5add7ad879e2f5939ff498f72f3e6 (diff)
downloadblackbird-op-linux-c95530c7798b760901c5d6212e528b03e323b8ac.tar.gz
blackbird-op-linux-c95530c7798b760901c5d6212e528b03e323b8ac.zip
[ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c
a function pxa_init_irq_set_wake() was introduced, so that processor specific code could install their own version code setting PFER and PRER registers within pxa_gpio_irq_type are removed, and the edge configuration is postponed to the (*set_wake) and copies the GRER and GFER register, which will always be set up correctly by pxa_gpio_irq_type() Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r--arch/arm/mach-pxa/generic.h1
-rw-r--r--arch/arm/mach-pxa/irq.c76
-rw-r--r--arch/arm/mach-pxa/pxa25x.c42
-rw-r--r--arch/arm/mach-pxa/pxa27x.c70
4 files changed, 116 insertions, 73 deletions
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 25bd9bf727b6..2c4fe617cfc0 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,6 +15,7 @@ extern struct sys_timer pxa_timer;
extern void __init pxa_init_irq_low(void);
extern void __init pxa_init_irq_high(void);
extern void __init pxa_init_irq_gpio(int gpio_nr);
+extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 3d95442d4168..294cc6758d55 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -38,33 +38,11 @@ static void pxa_unmask_low_irq(unsigned int irq)
ICMR |= (1 << irq);
}
-static int pxa_set_wake(unsigned int irq, unsigned int on)
-{
- u32 mask;
-
- switch (irq) {
- case IRQ_RTCAlrm:
- mask = PWER_RTC;
- break;
-#ifdef CONFIG_PXA27x
- /* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */
-#endif
- default:
- return -EINVAL;
- }
- if (on)
- PWER |= mask;
- else
- PWER &= ~mask;
- return 0;
-}
-
static struct irq_chip pxa_internal_chip_low = {
.name = "SC",
.ack = pxa_mask_low_irq,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
- .set_wake = pxa_set_wake,
};
void __init pxa_init_irq_low(void)
@@ -125,26 +103,6 @@ void __init pxa_init_irq_high(void)
}
#endif
-/* Note that if an input/irq line ever gets changed to an output during
- * suspend, the relevant PWER, PRER, and PFER bits should be cleared.
- */
-#ifdef CONFIG_PXA27x
-
-/* PXA27x: Various gpios can issue wakeup events. This logic only
- * handles the simple cases, not the WEMUX2 and WEMUX3 options
- */
-#define PXA27x_GPIO_NOWAKE_MASK \
- ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
-#define WAKEMASK(gpio) \
- (((gpio) <= 15) \
- ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
- : ((gpio == 35) ? (1 << 24) : 0))
-#else
-
-/* pxa 210, 250, 255, 26x: gpios 0..15 can issue wakeups */
-#define WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0)
-#endif
-
/*
* PXA GPIO edge detection for IRQs:
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
@@ -158,11 +116,9 @@ static long GPIO_IRQ_mask[4];
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
int gpio, idx;
- u32 mask;
gpio = IRQ_TO_GPIO(irq);
idx = gpio >> 5;
- mask = WAKEMASK(gpio);
if (type == IRQT_PROBE) {
/* Don't mess with enabled GPIOs using preconfigured edges or
@@ -182,19 +138,15 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & __IRQT_RISEDGE) {
/* printk("rising "); */
__set_bit (gpio, GPIO_IRQ_rising_edge);
- PRER |= mask;
} else {
__clear_bit (gpio, GPIO_IRQ_rising_edge);
- PRER &= ~mask;
}
if (type & __IRQT_FALEDGE) {
/* printk("falling "); */
__set_bit (gpio, GPIO_IRQ_falling_edge);
- PFER |= mask;
} else {
__clear_bit (gpio, GPIO_IRQ_falling_edge);
- PFER &= ~mask;
}
/* printk("edges\n"); */
@@ -213,29 +165,12 @@ static void pxa_ack_low_gpio(unsigned int irq)
GEDR0 = (1 << (irq - IRQ_GPIO0));
}
-static int pxa_set_gpio_wake(unsigned int irq, unsigned int on)
-{
- int gpio = IRQ_TO_GPIO(irq);
- u32 mask = WAKEMASK(gpio);
-
- if (!mask)
- return -EINVAL;
-
- if (on)
- PWER |= mask;
- else
- PWER &= ~mask;
- return 0;
-}
-
-
static struct irq_chip pxa_low_gpio_chip = {
.name = "GPIO-l",
.ack = pxa_ack_low_gpio,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
.set_type = pxa_gpio_irq_type,
- .set_wake = pxa_set_gpio_wake,
};
/*
@@ -342,7 +277,6 @@ static struct irq_chip pxa_muxed_gpio_chip = {
.mask = pxa_mask_muxed_gpio,
.unmask = pxa_unmask_muxed_gpio,
.set_type = pxa_gpio_irq_type,
- .set_wake = pxa_set_gpio_wake,
};
void __init pxa_init_irq_gpio(int gpio_nr)
@@ -377,3 +311,13 @@ void __init pxa_init_irq_gpio(int gpio_nr)
set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
}
+
+void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
+{
+ pxa_internal_chip_low.set_wake = set_wake;
+#ifdef CONFIG_PXA27x
+ pxa_internal_chip_high.set_wake = set_wake;
+#endif
+ pxa_low_gpio_chip.set_wake = set_wake;
+ pxa_muxed_gpio_chip.set_wake = set_wake;
+}
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index ef40c049d9e2..0d6a72504caa 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -227,10 +227,52 @@ static void __init pxa25x_init_pm(void)
}
#endif
+/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
+ */
+
+static int pxa25x_set_wake(unsigned int irq, unsigned int on)
+{
+ int gpio = IRQ_TO_GPIO(irq);
+ uint32_t gpio_bit, mask = 0;
+
+ if (gpio >= 0 && gpio <= 15) {
+ gpio_bit = GPIO_bit(gpio);
+ mask = gpio_bit;
+ if (on) {
+ if (GRER(gpio) | gpio_bit)
+ PRER |= gpio_bit;
+ else
+ PRER &= ~gpio_bit;
+
+ if (GFER(gpio) | gpio_bit)
+ PFER |= gpio_bit;
+ else
+ PFER &= ~gpio_bit;
+ }
+ goto set_pwer;
+ }
+
+ if (irq == IRQ_RTCAlrm) {
+ mask = PWER_RTC;
+ goto set_pwer;
+ }
+
+ return -EINVAL;
+
+set_pwer:
+ if (on)
+ PWER |= mask;
+ else
+ PWER &=~mask;
+
+ return 0;
+}
+
void __init pxa25x_init_irq(void)
{
pxa_init_irq_low();
pxa_init_irq_gpio(85);
+ pxa_init_irq_set_wake(pxa25x_set_wake);
}
static struct platform_device *pxa25x_devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d193755afb2b..2d7fc39732e4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -306,6 +306,69 @@ static void __init pxa27x_init_pm(void)
}
#endif
+/* PXA27x: Various gpios can issue wakeup events. This logic only
+ * handles the simple cases, not the WEMUX2 and WEMUX3 options
+ */
+#define PXA27x_GPIO_NOWAKE_MASK \
+ ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
+#define WAKEMASK(gpio) \
+ (((gpio) <= 15) \
+ ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
+ : ((gpio == 35) ? (1 << 24) : 0))
+
+static int pxa27x_set_wake(unsigned int irq, unsigned int on)
+{
+ int gpio = IRQ_TO_GPIO(irq);
+ uint32_t mask;
+
+ if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
+ if (WAKEMASK(gpio) == 0)
+ return -EINVAL;
+
+ mask = WAKEMASK(gpio);
+
+ if (on) {
+ if (GRER(gpio) | GPIO_bit(gpio))
+ PRER |= mask;
+ else
+ PRER &= ~mask;
+
+ if (GFER(gpio) | GPIO_bit(gpio))
+ PFER |= mask;
+ else
+ PFER &= ~mask;
+ }
+ goto set_pwer;
+ }
+
+ switch (irq) {
+ case IRQ_RTCAlrm:
+ mask = PWER_RTC;
+ break;
+ case IRQ_USB:
+ mask = 1u << 26;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+set_pwer:
+ if (on)
+ PWER |= mask;
+ else
+ PWER &=~mask;
+
+ return 0;
+}
+
+void __init pxa27x_init_irq(void)
+{
+ pxa_init_irq_low();
+ pxa_init_irq_high();
+ pxa_init_irq_gpio(128);
+ pxa_init_irq_set_wake(pxa27x_set_wake);
+}
+
/*
* device registration specific to PXA27x.
*/
@@ -375,13 +438,6 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_ohci,
};
-void __init pxa27x_init_irq(void)
-{
- pxa_init_irq_low();
- pxa_init_irq_high();
- pxa_init_irq_gpio(128);
-}
-
static int __init pxa27x_init(void)
{
int ret = 0;
OpenPOWER on IntegriCloud